{"title":"Actisense NMEA 2000","description":"\u003ch2\u003eActisense NMEA 2000\u003c\/h2\u003e\u003cp\u003eActisense is the authority on NMEA data, building the interfaces and networks that tie a helm together. This is the Actisense nmea 2000 range: plug-and-play backbone, drops and devices for a NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/actisense\"\u003eActisense range\u003c\/a\u003e or \u003ca href=\"\/collections\/nmea-2000\"\u003eNMEA 2000 from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"a2k-kit-2a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-6M","description":"\u003ch1\u003eThe NMEA 2000 Starter Kit 2a from Actisense provides everything that is required to start an NMEA 2000 installation.\u003c\/h1\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe NMEA 2000 Starter Kit 2a contains:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-MPT-2\u003c\/strong\u003e: Micro Power T- to power the network.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2x A2K-TER-M\u003c\/strong\u003e: NMEA 2000 micro terminator male – to terminate the ends of the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-T-MFF\u003c\/strong\u003e: 2x Micro T-piece – to allow two NMEA 2000 devices to connect to the network.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TDC-6M\u003c\/strong\u003e: NMEA 2000 Lite cable assembly 6 metre – to extend the distance between any two network pieces.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015346516,"sku":"A2K-KIT-2a","price":171.58,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-kit-3","title":"Actisense Starter Kit with Micro power connector (MPC), 4-way T, TER-F, TER-M","description":"\u003ch2\u003eAn expandable solution for smaller boat users that wish to install an NMEA 2000 network.\u003c\/h2\u003e\n\n\u003cp\u003eInstalling small NMEA 2000 networks is quicker and easier than it’s ever been with this NMEA 2000 Starter Kit (A2K-KIT-3) from Actisense.\u003c\/p\u003e\n\n\u003cp\u003eThe equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are included and as they are removable, the network can be extended if needed.\u003c\/p\u003e\n\n\u003cp\u003eThe Micro power cord provides a unique solution to quickly power your network that is easy to install, taking ‘Plug \u0026amp; Play’ to the next level.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe NMEA 2000 Starter Kit 3 contains:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-MPC-1\u003c\/strong\u003e: NMEA 2000 Micro power cable, 3m UL certified cable\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TER-F\u003c\/strong\u003e: NMEA 2000 micro terminator female – to terminate one end of the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TER-M\u003c\/strong\u003e: NMEA 2000 micro terminator male – to terminate one end of the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-4WT\u003c\/strong\u003e: Multi Drop T\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015575892,"sku":"A2K-KIT-3","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-0m25","title":"Actisense Micro cable assembly 0.25 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015674196,"sku":"A2K-TDC-0M25","price":30.43,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-pmw-f","title":"Actisense Rear panel mount wired, 5 pin micro female","description":"\u003ch3\u003ePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.\u003c\/h3\u003e\n\n\u003cp\u003eWaterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead\/panel.\u003c\/p\u003e\n\n\u003cp\u003eThe female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018525012,"sku":"A2K-PMW-F","price":17.27,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-gcm-0m25","title":"Actisense Micro gender changer (male to male) 0.25 metre, UL certified cable","description":"\u003ch3\u003eUse between two cable connectors of the same type and gender of connector on an NMEA 2000® backbone.\u003c\/h3\u003e\n\n\u003cp\u003eManufactured using Actisense designed connectors with 0.25m UL certified cable, the gender changers offer easy and secure connections.\u003c\/p\u003e\n\n\u003cp\u003eThe gender changers are available in male and female versions.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018852692,"sku":"A2K-GCM-0M25","price":31.72,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-sbn-1","title":"Actisense Self-Contained Boat Network - complete network for four devices with internal terminators and power feed.","description":"\u003ch3\u003eInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN-1) from Actisense.\u003c\/h3\u003e\n\n\u003cp\u003eThe equivalent of four T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSelf-contained NMEA 2000 Network\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Termination Resistors\u003c\/li\u003e\n\t\u003cli\u003e4x NMEA 2000 drops\u003c\/li\u003e\n\t\u003cli\u003eRuggedized, flame retardant over-moulded housing\u003c\/li\u003e\n\t\u003cli\u003eMetal coupling nuts\u003c\/li\u003e\n\t\u003cli\u003eIntegrated EMI shield\u003c\/li\u003e\n\t\u003cli\u003eOrange, UL Rated, 3-meter power cable\u003c\/li\u003e\n\t\u003cli\u003eColour coded wires, stripped and tinned\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLow cost, quick to install and provides and easy way to connect multiple NMEA 2000 devices.\u003c\/li\u003e\n\t\u003cli\u003eSimple installation, fewer components, more reliable, lower cost.\u003c\/li\u003e\n\t\u003cli\u003eAccommodates the vast majority of compact NMEA 2000 networks\u003c\/li\u003e\n\t\u003cli\u003eSuitable for wet and harsh conditions- highly desirable in marine environments\u003c\/li\u003e\n\t\u003cli\u003eReliable, long lasting connections\u003c\/li\u003e\n\t\u003cli\u003eLess likely to be susceptible to interference\u003c\/li\u003e\n\t\u003cli\u003eUL rated cable provides peace of mind. Colour easily differentiates the power cable from drop cables\u003c\/li\u003e\n\t\u003cli\u003eQuick installation, no special tools required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951019770196,"sku":"A2K-SBN-1","price":98.78,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ffc-sm","title":"Actisense Micro field fit connector, straight - male","description":"\u003cp\u003eMale and female variants, as well as right angle options for each, provide full flexibility and make it easy to install cable around tight bends, meaning your network can be fully customised. Actisense Field Fit Connectors allow for secure, reliable connections in any NMEA 2000 installation using Lite cable. The glands inside the connectors tighten around the cable as they are screwed together to maintain watertight integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Field Fit Connectors allow cables to be cut to any length resulting in less excess. Right angled options mean cables can be fitted at any angle to allow ease of installation from the desired entry point. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020097876,"sku":"A2K-FFC-SM","price":27.96,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ter-u","title":"Actisense NMEA 2000 Smart Universal Micro Terminator","description":"\u003cp\u003eIntroducing the world’s first intelligent universal inline terminator.\u003c\/p\u003e\n\n\u003cp\u003eTerminate your NMEA 2000 network – \u003cem\u003eregardless whether a male or female connection is required\u003c\/em\u003e – and use the TER-U’s smart functionality to easily diagnose any power or voltage issues on your NMEA 2000 bus.\u003c\/p\u003e\n\n\u003cp\u003eThe TER-U can be fitted directly at the end of your network or used as an in-line terminator in difficult to access locations.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003eThe TER-U acts as an intelligent \u003cstrong\u003ediagnostic\u003c\/strong\u003e terminator which provides instant feedback as to the state of the NMEA 2000 bus onboard. It is also a \u003cstrong\u003euniversal\u003c\/strong\u003e terminator which can be used as an inline terminator or else as either a Male or Female terminator, as it comes supplied with blanking caps.\u003c\/p\u003e\n\n\u003cp\u003eIt has a built-in high accuracy voltage monitoring circuit which continuously monitors the bus voltage, and will illuminate its internal LEDs when it detects that the bus voltage is of the correct polarity. If it detects that the voltage is within the minimum required range, it will indicate ‘\u003cstrong\u003eGREEN\u003c\/strong\u003e’ immediately, providing continuous valuable feedback as to the state of the bus.\u003c\/p\u003e\n\n\u003cp\u003eIf the voltage falls below the minimum required level of 9.0V, then the LED’s will  illuminate ‘\u003cstrong\u003eRED\u003c\/strong\u003e’, showing there is a potential problem with the NMEA 2000 bus power. Similarly, if the LED’s do not illuminate at all, this would indicate that there was no power or that the polarity was incorrect. This monitoring function happens continuously and remains permanent.\u003c\/p\u003e\n\n\u003cp\u003eBecause these terminators are illuminated, they instantly provide feedback that the terminator is actually present (i.e. able to identify that there are two terminators present) – especially helpful in difficult-to-reach locations.\u003c\/p\u003e\n\n\u003cp\u003eThis smart universal micro-terminator can be used as either a male or female terminator or even as a feed through terminator for applications at the top of masts, making it truly universal.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020556628,"sku":"A2K-TER-U","price":37.68,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ffc-rm","title":"Actisense Micro field fit connector, right-angle male","description":"\u003cp\u003eMale and female variants, as well as right angle options for each, provide full flexibility and make it easy to install cable around tight bends, meaning your network can be fully customised. Actisense Field Fit Connectors allow for secure, reliable connections in any NMEA 2000 installation using Lite cable. The glands inside the connectors tighten around the cable as they are screwed together to maintain watertight integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Field Fit Connectors allow cables to be cut to any length resulting in less excess. Right angled options mean cables can be fitted at any angle to allow ease of installation from the desired entry point. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020786004,"sku":"A2K-FFC-RM","price":28.8,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-sbn-2","title":"Actisense Self-Contained Boat Network - complete network for eight devices with internal terminators and power feed.","description":"\u003ch3\u003eInstalling small NMEA 2000® networks is quicker and easier than it’s ever been with the Self-contained Boat Network (SBN) from Actisense.\u003c\/h3\u003e\n\n\u003cp\u003eThe equivalent of eight T-pieces in a single case provides a significant time and space saving with no more connecting multiple T-pieces together. Termination resistors are built in which increases the saving on time and space.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eSelf-contained NMEA 2000 Network\u003c\/li\u003e\n\t\u003cli\u003eIntegrated Termination Resistors\u003c\/li\u003e\n\t\u003cli\u003e8x NMEA 2000 drops\u003c\/li\u003e\n\t\u003cli\u003eRuggedized, flame retardant over-moulded housing\u003c\/li\u003e\n\t\u003cli\u003eMetal coupling nuts\u003c\/li\u003e\n\t\u003cli\u003eIntegrated EMI Shield\u003c\/li\u003e\n\t\u003cli\u003eOrange, UL Rated, 3-meter power cable\u003c\/li\u003e\n\t\u003cli\u003eColour coded wires, stripped and tinned\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eLow cost, quick to install, and provides an easy way to connect multiple NMEA 2000 devices\u003c\/li\u003e\n\t\u003cli\u003eSimple installation, fewer components, more reliable, lower cost\u003c\/li\u003e\n\t\u003cli\u003eAccommodates the vast majority of compact NMEA 2000 networks\u003c\/li\u003e\n\t\u003cli\u003eSuitable for wet and harsh conditions- highly desirable in marine environments\u003c\/li\u003e\n\t\u003cli\u003eReliable, long lasting connections\u003c\/li\u003e\n\t\u003cli\u003eLess likely to be susceptible to interference\u003c\/li\u003e\n\t\u003cli\u003eUL rated cable provide peace of mind. Colour easily differentiates the power cable form drop cables\u003c\/li\u003e\n\t\u003cli\u003eQuick installation, no special tools required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020884308,"sku":"A2K-SBN-2","price":119.94,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-6m","title":"Actisense Micro cable assembly 6 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020949844,"sku":"A2K-TDC-6M","price":51.44,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-gcf-0m25","title":"Actisense Micro gender changer (female to female) 0.25 metre, UL certified cable","description":"\u003ch2\u003eUse between two cable connectors of the same type and gender of connector on an NMEA 2000® backbone.\u003c\/h2\u003e\n\n\u003cp\u003eManufactured using Actisense designed connectors with 0.25m UL certified cable, the gender changers offer easy and secure connections.\u003c\/p\u003e\n\n\u003cp\u003eThe gender changers are available in male and female versions.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951021146452,"sku":"A2K-GCF-0M25","price":31.72,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-8m","title":"Actisense Micro cable assembly 8 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951021834580,"sku":"A2K-TDC-8M","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-screwcap-10-f","title":"Actisense Protective SCREW cover for NMEA 2000 female Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eScrew-cap covers for the NMEA 2000 Micro connectors, female and male versions available. Sold in quantities of 10.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951022555476,"sku":"A2K-SCREWCAP-10-F","price":17.76,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ffc-rf","title":"Actisense Micro field fit connector, right-angle female","description":"\u003cp\u003eMale and female variants, as well as right angle options for each, provide full flexibility and make it easy to install cable around tight bends, meaning your network can be fully customised. Actisense Field Fit Connectors allow for secure, reliable connections in any NMEA 2000 installation using Lite cable. The glands inside the connectors tighten around the cable as they are screwed together to maintain watertight integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Field Fit Connectors allow cables to be cut to any length resulting in less excess. Right angled options mean cables can be fitted at any angle to allow ease of installation from the desired entry point. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951060730196,"sku":"A2K-FFC-RF","price":28.68,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-screwcap-10-m","title":"Actisense Protective SCREW cover for NMEA 2000 male Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eScrew-cap covers for the NMEA 2000 Micro connectors, female and male versions available. Sold in quantities of 10.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951062630740,"sku":"A2K-SCREWCAP-10-M","price":17.76,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-5m","title":"Actisense Micro cable assembly 5 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951064564052,"sku":"A2K-TDC-5M","price":48.61,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-kit-1a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-2M","description":"\u003ch2\u003eThe NMEA 2000 Starter Kit from Actisense provides everything that is required to start an NMEA 2000 installation.\u003c\/h2\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe NMEA 2000 Starter Kit 1a contains:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-MPT-2\u003c\/strong\u003e: Micro Power T- to power the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003e2x A2K-TER-M\u003c\/strong\u003e: NMEA 2000 micro terminator male – to terminate the ends of the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-T-MFF\u003c\/strong\u003e: 2x Micro T-piece – to allow two NMEA 2000 devices to connect to the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TDC-2M\u003c\/strong\u003e: NMEA 2000 Lite cable assembly 2 metre – to extend the distance between any two network pieces.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951065809236,"sku":"A2K-KIT-1a","price":162.47,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-kit-4a","title":"Actisense Micro Starter Kit - contains MPT-2, TER-U(x2), T-MFF(x2), TDC-4M","description":"\u003ch2\u003eThe NMEA 2000 Micro Smart Starter Kit from Actisense provides everything that is required to start an NMEA 2000 installation.\u003c\/h2\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge. This kit is also the first to feature our breakthrough Smart Universal Terminators to help you easily identify any potential voltage issues on your network.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe NMEA 2000 Smart Starter Kit  contains:\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-MPT-2\u003c\/strong\u003e: Micro Power T- to power the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TER-U\u003c\/strong\u003e: 2x NMEA 2000 micro Smart Universal Terminator – to terminate each end of the network and monitor network voltage\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-T-MFF\u003c\/strong\u003e: 2x Micro T-piece – to allow two NMEA 2000 devices to connect to the network\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eA2K-TDC-4M\u003c\/strong\u003e: NMEA 2000 Lite cable assembly 4 metre – to extend the distance between any two network pieces.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951066005844,"sku":"A2K-KIT-4a","price":214.85,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-pmw-m","title":"Actisense Rear panel mount wired, 5 pin micro male","description":"\u003ch3\u003ePanel mount wired connectors available from Actisense allow NMEA 2000 installations through watertight bulkheads (or panels) to be achieved.\u003c\/h3\u003e\n\n\u003cp\u003eWaterproof seals ensure the integrity of the NMEA 2000 connection and bulkhead\/panel.\u003c\/p\u003e\n\n\u003cp\u003eThe female panel mount wired connector can easily replace any of the existing ‘drop’ glands on the Actisense QNB-1 to create a quick pluggable NMEA 2000 connection option.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951068234068,"sku":"A2K-PMW-M","price":17.35,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-3m","title":"Actisense Micro cable assembly 3 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951070855508,"sku":"A2K-TDC-3M","price":41.34,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ter-m","title":"Actisense Micro terminator male","description":"\u003ch3\u003eActisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation.\u003c\/h3\u003e\n\n\u003cp\u003eEach NMEA 2000 installation must have precisely two termination resistors installed, on at each end of the backbone, to ensure proper operation and signal integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071019348,"sku":"A2K-TER-M","price":16.2,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-bulk-100m","title":"Actisense Micro bulk cable reel, 100 metres, UL certified cable","description":"\u003ch2\u003eCreate or extend an NMEA 2000 backbone of flexible lengths to suit any installation.\u003c\/h2\u003e\n\n\u003cp\u003eThe Actisense NMEA 2000 Bulk Lite cable is available in 100 metre reels and ideal for use with the Actisense QNB-1 Quick Network Block or Field Fit Connectors (FFC).\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wire within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum permitted length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres. To help with this limitation, Actisense have drop cable assemblies in varying lengths from 0.25 metres to 6 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071084884,"sku":"A2K-BULK-100M","price":413.17,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-10m","title":"Actisense Micro cable assembly 10 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071969620,"sku":"A2K-TDC-10M","price":69.7,"currency_code":"GBP","in_stock":true}]},{"product_id":"qnb-1","title":"Actisense NMEA 2000 Network Block, 6 screw terminal drops, power feed and diagnostic features","description":"\u003ch3\u003eFault-free, NMEA 2000® backbone connections.\u003c\/h3\u003e\n\n\u003cp\u003eThe QNB-1 and QNB-1-PMW provide alternatives to multiple connectors, reducing the cost of an NMEA 2000 cable installation. Perfectly suited to areas of high instrument density, as six drops can be connected.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe QNB-1 is available in two versions:\u003c\/strong\u003e\u003cbr\u003e\nThe \u003ca href=\"https:\/\/hudsonmarine.co.uk\/products\/qnb-1-pmw\"\u003e\u003cstrong\u003eQNB-1-PMW\u003c\/strong\u003e\u003c\/a\u003e version is fitted with six standard NMEA 2000 M12 (Micro-fit) female connectors which allow ‘plug and play’ connections for quick and easy installation. A Raymarine STNG backbone can be wired to one side of the QNB-1 to combine standard NMEA 2000 with STNG without the need for adapter cables.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eQNB-1\u003c\/strong\u003e version is fitted with glands to allow for installation of custom lengths of cable. This is a great option for ‘mix \u0026amp; matching’ standard NMEA 2000 devices with Raymarine STNG devices.\u003c\/p\u003e\n\n\u003cp\u003eThe LEDs provide information for the installer during set up and to indicate the presence of data, power status, power reversal and to show whether the fuses are intact.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951073411412,"sku":"QNB-1","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-2m","title":"Actisense Micro cable assembly 2 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951073935700,"sku":"A2K-TDC-2M","price":37.5,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ffc-sf","title":"Actisense Micro field fit connector, straight - female","description":"\u003cp\u003eMale and female variants, as well as right angle options for each, provide full flexibility and make it easy to install cable around tight bends, meaning your network can be fully customised. Actisense Field Fit Connectors allow for secure, reliable connections in any NMEA 2000 installation using Lite cable. The glands inside the connectors tighten around the cable as they are screwed together to maintain watertight integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Field Fit Connectors allow cables to be cut to any length resulting in less excess. Right angled options mean cables can be fitted at any angle to allow ease of installation from the desired entry point. The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951074492756,"sku":"A2K-FFC-SF","price":27.42,"currency_code":"GBP","in_stock":true}]},{"product_id":"db9-f","title":"Actisense 9 pin, D type moulded cable assembly (female)","description":"\u003ch3\u003e9 pin, D type moulded cable assembly.\u003c\/h3\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951122334036,"sku":"DB9-F","price":11.44,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngt-1-usb","title":"Actisense NMEA 2000 PC Interface, standard version with USB","description":"\u003ch3\u003eInterface your PC to the NMEA 2000® bus.\u003c\/h3\u003e\n\n\u003cp\u003eThe NGT-1 is an intelligent NMEA 2000 gateway able to precisely Transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of Chartplotters, display and configuration applications available for PCs.\u003c\/p\u003e\n\n\u003cp\u003eThe diagnostic NMEA Reader software allows viewing of NMEA 2000 messages with configuration options, enabling some set-up of Actisense products on the NMEA 2000 bus.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully NMEA 2000 Certified\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe handy firewall feature enforces the NMEA 2000 bus rules, so software developers can create compliant software at a fraction of the direct certification costs. The supporting Actisense Software Development Kit (SDK) helps to reduce the required development time.\u003c\/p\u003e\n\n\u003cp\u003eWith the upcoming ‘Third Party Gateway’ status, leading chart plotter software will be able to be certified to work with the NGT-1.\u003c\/p\u003e\n\n\u003cp\u003eActisense welcomes enquiries from software manufacturers who would like to incorporate NMEA 2000 and the NGT-1 into their software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGT-1-USB\u003c\/strong\u003e is the standard option – USB interface for bi-directional connection to a PC.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951129215316,"sku":"NGT-1-USB","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"actisense-nmea-2000-bulk-cable-reel-100m-a2kbulk100m","title":"Actisense NMEA 2000 Bulk Cable Reel - 100m","description":"\u003cp\u003eCreate or extend an NMEA 2000 backbone of flexible lengths to suit any installation. The Actisense NMEA 2000 Bulk Lite cable is suppllied in 100 metre reels and is ideal for use with the Actisense QNB-1 Quick Network Block or Field Fit Connectors (FFC).\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951129510228,"sku":"A2KBULK100M","price":413.17,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngw-1-iso","title":"Actisense NMEA 0183 to NMEA 2000 Gateway, standard configuration","description":"\u003ch2\u003eHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices.\u003c\/h2\u003e\n\n\u003cp\u003eThe NMEA 2000 Gateway provides an uncomplicated way to link between a boat’s data networks and converts NMEA 0183 data into NMEA 2000 data and vice-versa.\u003c\/p\u003e\n\n\u003cp\u003eMultiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data from one place to another.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGW-1-ISO\u003c\/strong\u003e is the standard option. With an opto-isolated input and ISO-Drive output for direct NMEA 0183 device bi-directional connection.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFully isolated NMEA 0183 incorporating ISO-Drive™ technology\u003c\/li\u003e\n\t\u003cli\u003eAdvanced configuration using Actisense Toolkit allows Tx \/ Rx lists and Tx rates to be set\u003c\/li\u003e\n\t\u003cli\u003eSupports Fast Heading at 10Hz\u003c\/li\u003e\n\t\u003cli\u003eUp to 230,400 baud data transfer rate\u003c\/li\u003e\n\t\u003cli\u003eIntegrated 1.5m drop cable\u003c\/li\u003e\n\t\u003cli\u003eDiagnostic receive LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUpgrade NMEA 0183 equipment to NMEA 2000\u003c\/li\u003e\n\t\u003cli\u003eAllow NMEA 0183 devices to receive vital NMEA 2000 data\u003c\/li\u003e\n\t\u003cli\u003eUse the NMEA 2000 bus to multiplex several NMEA 0183 signals together\u003c\/li\u003e\n\t\u003cli\u003eReliable, renowned bi-directional conversion engine\u003c\/li\u003e\n\t\u003cli\u003eSupports a wide range of conversions including AIS\u003c\/li\u003e\n\t\u003cli\u003eEasily configurable using Actisense Toolkit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951135474004,"sku":"NGW-1-ISO","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngt-1-iso","title":"Actisense NMEA 2000 PC Interface, specialist version with RS422 serial","description":"\u003ch3\u003eInterface your PC to the NMEA 2000® bus.\u003c\/h3\u003e\n\n\u003cp\u003eThe NGT-1 is an intelligent NMEA 2000 gateway able to precisely Transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of Chartplotters, display and configuration applications available for PCs.\u003c\/p\u003e\n\n\u003cp\u003eThe diagnostic NMEA Reader software allows viewing of NMEA 2000 messages with configuration options, enabling some set-up of Actisense products on the NMEA 2000 bus.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully NMEA 2000 Certified\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe handy firewall feature enforces the NMEA 2000 bus rules, so software developers can create compliant software at a fraction of the direct certification costs. The supporting Actisense Software Development Kit (SDK) helps to reduce the required development time.\u003c\/p\u003e\n\n\u003cp\u003eWith the upcoming ‘Third Party Gateway’ status, leading chart plotter software will be able to be certified to work with the NGT-1.\u003c\/p\u003e\n\n\u003cp\u003eActisense welcomes enquiries from software manufacturers who would like to incorporate NMEA 2000 and the NGT-1 into their software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGT-1-ISO\u003c\/strong\u003e is a more specialist option – Opto-isolated input and ISO-Drive output for a direct PC bi-directional connection.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951139864916,"sku":"NGT-1-ISO","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngx-1-iso","title":"Actisense NMEA 0183 to NMEA 2000 Gateway, with PC interface (ISO connection)","description":"\u003ch3\u003eIntelligent Gateway technology enables PC interfacing and NMEA data conversion…\u003c\/h3\u003e\n\n\u003cp\u003eThe NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and    NGW-1) into one, cost effective, flexible product.\u003c\/p\u003e\n\n\u003cp\u003eConfigure the NGX-1 to operate as an NMEA 2000 \u0026lt;–\u0026gt; PC interface, or as a bi-directional NMEA 0183 \u0026lt;–\u0026gt; NMEA 2000 conversion gateway.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFull control and visibility of your vessel data using the NGX-1; \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eView all NMEA 2000 network data on Actisense NMEA Reader. The device supports every available PGN in the NMEA 2000 standard.\u003c\/li\u003e\n\t\u003cli\u003eView converted NMEA 0183 data on Actisense NMEA Reader. The device sports the largest conversion library of any gateway.\u003c\/li\u003e\n\t\u003cli\u003eEasily interface with a wide range of PC applications via the NGX-1, such as TimeZero (NMEA 2000) and OpenCPN (NMEA 0183).\u003c\/li\u003e\n\t\u003cli\u003eConfigure the Actisense EMU-1, NGW-1 and NGX-1 via Actisense Toolkit using an NGX-1.\u003c\/li\u003e\n\t\u003cli\u003eConnect legacy NMEA 0183 instruments together with new NMEA 2000 networks, greatly reducing upgrade costs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGX-1-ISO:\u003c\/strong\u003e equipped with a bare wire open ended cable, allowing for connectivity to an NMEA 0183 device, or Serial Port \/ DB-9.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951172927828,"sku":"NGX-1-ISO","price":215.66,"currency_code":"GBP","in_stock":true}]},{"product_id":"wgx-1-iso","title":"Actisense Wi-Fi NMEA 0183 to NMEA 2000 Gateway, with PC interface (ISO connection)","description":null,"brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951173058900,"sku":"WGX-1-ISO","price":301.13,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngw-1-usb","title":"Actisense NMEA 0183 to NMEA 2000 Gateway with USB, standard configuration","description":"\u003ch2\u003eHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices.\u003c\/h2\u003e\n\n\u003cp\u003eThe NMEA 2000 Gateway provides an uncomplicated way to link between a boat’s data networks and converts NMEA 0183 data into NMEA 2000 data and vice-versa.\u003c\/p\u003e\n\n\u003cp\u003eMultiple NGW-1 units can be used to multiplex numerous NMEA 0183 devices onto the NMEA 2000 network, using the network as a means of combining and transferring all data from one place to another.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGW-1-USB\u003c\/strong\u003e is the NMEA 0183 USB (1.1 and 2.0) interface for bi-directional connection to a PC for use with NMEA 0183 software.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFEATURES\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eFully isolated NMEA 0183 incorporating ISO-Drive™ technology\u003c\/li\u003e\n\t\u003cli\u003eAdvanced configuration using Actisense Toolkit allows Tx \/ Rx lists and Tx rates to be set\u003c\/li\u003e\n\t\u003cli\u003eSupports Fast Heading at 10Hz\u003c\/li\u003e\n\t\u003cli\u003eUp to 230,400 baud data transfer rate\u003c\/li\u003e\n\t\u003cli\u003eIntegrated 1.5m drop cable\u003c\/li\u003e\n\t\u003cli\u003eDiagnostic receive LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUpgrade NMEA 0183 equipment to NMEA 2000\u003c\/li\u003e\n\t\u003cli\u003eAllow NMEA 0183 devices to receive vital NMEA 2000 data\u003c\/li\u003e\n\t\u003cli\u003eUse the NMEA 2000 bus to multiplex several NMEA 0183 signals together\u003c\/li\u003e\n\t\u003cli\u003eReliable, renowned bi-directional conversion engine\u003c\/li\u003e\n\t\u003cli\u003eSupports a wide range of conversions including AIS\u003c\/li\u003e\n\t\u003cli\u003eEasily configurable using Actisense Toolkit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951181283668,"sku":"NGW-1-USB","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"w2k-2","title":"Actisense Wi-Fi to NMEA 2000 Gateway","description":"\u003ch3\u003eThe W2K-2 is a rugged and reliable NMEA 2000 to Wi-Fi Gateway with built-in data logger and Actisense-i diagnostic tools.\u003c\/h3\u003e\n\n\u003cp\u003eTransfer data from an NMEA 2000 backbone to any device (e.g laptop, tablet or smartphone) connected to the W2K-2 via Wi-Fi and additionally convert this data to NMEA 0183 using Actisense’s renowned conversion engine. \u003cstrong\u003e\u003ca href=\"https:\/\/actisense.com\/actisense-i\/\"\u003eActisense-i\u003c\/a\u003e\u003c\/strong\u003e is a suite of diagnostic tools and health checker for your network.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully NMEA 2000 Certified\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe W2K-2 has built-in conversion of NMEA 2000 messages into NMEA 0183 sentences thus allowing a wide variety of vessel data (e.g. position, speed, course, wind speed, depth, engine data, AIS messages etc.) to be shared with NMEA 0183 compatible software applications running on connected devices.\u003c\/p\u003e\n\n\u003cp\u003eAll the data received (or a selected subset) can be logged to its internal micro SD card for later downloading to use for analysing the voyage. This is very useful for analysing race data, generating logbooks, diagnosing problems or even sharing your voyage details. Approximately 16 days* of data can be stored on the pre-installed industrial grade micro SD card, which can be upgraded should the user require more storage.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/actisense.com\/actisense-i\/\"\u003eActisense-i\u003c\/a\u003e comes included as standard. Benefit from our full suite of diagnostic tools to help check and diagnose potential issues on a boat’s electronics network, including voltage issues, and the working status of all devices attached to the network, Actisense-i has been designed to save installers and boaters time and ultimately, money, by giving them confidence in their electronics onboard.\u003c\/p\u003e\n\n\u003cp\u003eThe W2K-2 has the legendary Actisense “Reliability Built-In” along with useful diagnostic LEDs, internal antenna, enhanced password security, full certification and all packaged in an extremely rugged IP67 case.\u003c\/p\u003e\n\n\u003cp\u003e*Bus load-dependent – can vary between 6 and 100 days\u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e\n\n\u003cp\u003e \u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951181447508,"sku":"W2K-2","price":238.56,"currency_code":"GBP","in_stock":true}]},{"product_id":"stng-a06045","title":"Actisense SeaTalk NG to NMEA 2000 adaptor cable (drop). Only for purchase with Actisense NMEA 2000 devices.","description":"\u003cp\u003e400mm NMEA2000 drop cable SeaTalk ng spur to female devicenet\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951182463316,"sku":"STNG-A06045","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"ngx-1-usb","title":"Actisense NMEA 0183 to NMEA 2000 Gateway, with PC interface (USB connection)","description":"\u003ch3\u003eIntelligent Gateway technology enables PC interfacing and NMEA data conversion…\u003c\/h3\u003e\n\n\u003cp\u003eThe NGX-1 is an intelligent multi-function gateway, combining the power of our two previous generation products (NGT-1 and    NGW-1) into one, cost effective, flexible product.\u003c\/p\u003e\n\n\u003cp\u003eConfigure the NGX-1 to operate as an NMEA 2000 \u0026lt;–\u0026gt; PC interface, or as a bi-directional NMEA 0183 \u0026lt;–\u0026gt; NMEA 2000 conversion gateway.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFull control and visibility of your vessel data using the NGX-1; \u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eView all NMEA 2000 network data on Actisense NMEA Reader. The device supports every available PGN in the NMEA 2000 standard.\u003c\/li\u003e\n\t\u003cli\u003eView converted NMEA 0183 data on Actisense NMEA Reader. The device sports the largest conversion library of any gateway.\u003c\/li\u003e\n\t\u003cli\u003eEasily interface with a wide range of PC applications via the NGX-1, such as TimeZero (NMEA 2000) and OpenCPN (NMEA 0183).\u003c\/li\u003e\n\t\u003cli\u003eConfigure the Actisense EMU-1, NGW-1 and NGX-1 via Actisense Toolkit using an NGX-1.\u003c\/li\u003e\n\t\u003cli\u003eConnect legacy NMEA 0183 instruments together with new NMEA 2000 networks, greatly reducing upgrade costs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eNGX-1-USB:\u003c\/strong\u003e equipped with a USB cable to allow Plug and Play connectivity with a PC.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951182889300,"sku":"NGX-1-USB","price":230.38,"currency_code":"GBP","in_stock":true}]},{"product_id":"qnb-1-pmw","title":"Actisense NMEA 2000 Network Block, 6 micro female drops, power feed and diagnostic features","description":"\u003ch3\u003eFault-free, NMEA 2000® backbone connections.\u003c\/h3\u003e\n\n\u003cp\u003eThe QNB-1 and QNB-1-PMW provide alternatives to multiple connectors, reducing the cost of an NMEA 2000 cable installation. Perfectly suited to areas of high instrument density, as six drops can be connected.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eThe QNB-1 is available in two versions:\u003c\/strong\u003e\u003cbr\u003e\nThe \u003cstrong\u003eQNB-1-PMW\u003c\/strong\u003e version is fitted with six standard NMEA 2000 M12 (Micro-fit) female connectors which allow ‘plug and play’ connections for quick and easy installation. A Raymarine STNG backbone can be wired to one side of the QNB-1 to combine standard NMEA 2000 with STNG without the need for adapter cables.\u003c\/p\u003e\n\n\u003cp\u003eThe \u003ca href=\"https:\/\/hudsonmarine.co.uk\/products\/qnb-1\"\u003e\u003cstrong\u003eQNB-1\u003c\/strong\u003e\u003c\/a\u003e version is fitted with glands to allow for installation of custom lengths of cable. This is a great option for ‘mix \u0026amp; matching’ standard NMEA 2000 devices with Raymarine STNG devices.\u003c\/p\u003e\n\n\u003cp\u003eThe LEDs provide information for the installer during set up and to indicate the presence of data, power status, power reversal and to show whether the fuses are intact.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951196684628,"sku":"QNB-1-PMW","price":372.71,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-0m5","title":"Actisense Micro cable assembly 0.5 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951263727956,"sku":"A2K-TDC-0M5","price":33.62,"currency_code":"GBP","in_stock":true}]},{"product_id":"actisense-ngw-1-nmea-0183-to-nmea-2000-gateway-iso-version-005-ngw-1","title":"Actisense NGW-1 NMEA 0183 to NMEA 2000 Gateway (ISO version)","description":"\u003cp\u003eHook up to NMEA 2000 whilst keeping currently installed NMEA 0183 devices. The NGW-1 range provides an uncomplicated way to link between a boat’s data networks and converts NMEA 0183 data into NMEA 2000 data and vice-versa.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 0183 to NMEA 2000 Gateway - Bare wires to NMEA 2000 Micro Conector.\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eully isolated NMEA 0183 incorporating ISO-Driveâ„¢ technology\u003c\/li\u003e\n\t\u003cli\u003eAdvanced configuration using Actisense Toolkit allows Tx \/ Rx lists and Tx rates to be set\u003c\/li\u003e\n\t\u003cli\u003eSupports Fast Heading at 10Hz\u003c\/li\u003e\n\t\u003cli\u003eUp to 230,400 baud data transfer rate\u003c\/li\u003e\n\t\u003cli\u003eIntegrated 1.5m drop cable\u003c\/li\u003e\n\t\u003cli\u003eDiagnostic receive LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully NMEA 2000 Certified\u003c\/strong\u003e\u003cbr\u003e\nThe NGW-1 has the largest range of conversions available on the market. To see a full up to date list of the conversions the various configurations can handle, please click here.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense NMEA Reader software utility allows the NGW-1 user to view and understand (in detail) the translated NMEA 0183 sentences output by an NGW-1 directly.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eBENEFITS\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\t\u003cli\u003eUpgrade NMEA 0183 equipment to NMEA 2000\u003c\/li\u003e\n\t\u003cli\u003eAllow NMEA 0183 devices to receive vital NMEA 2000 data\u003c\/li\u003e\n\t\u003cli\u003eUse the NMEA 2000 bus to multiplex several NMEA 0183 signals together\u003c\/li\u003e\n\t\u003cli\u003eReliable, renowned bi-directional conversion engine\u003c\/li\u003e\n\t\u003cli\u003eSupports a wide range of conversions including AIS\u003c\/li\u003e\n\t\u003cli\u003eEasily configurable using Actisense Toolkit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951919841620,"sku":"005-NGW-1","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"actisense-emu-1-nmea-2000-engine-monitoring-unit-emu-1-bas","title":"Actisense Engine Monitoring Unit, Analogue to NMEA 2000, standard configuration","description":"\u003ch3\u003eShare engine information on the NMEA 2000 bus.\u003c\/h3\u003e\n\n\u003cp\u003eThe Actisense EMU-1 is a specialized analogue to NMEA 2000 Gateway which converts data from analogue engine gauges\/senders into NMEA 2000 data. The EMU-1 enables the sharing of engine data throughout the NMEA 2000 bus. It digitises analogue engine sensors, enabling NMEA 2000 display devices to monitor the connected engine(s) on a vessel.\u003c\/p\u003e\n\n\u003cp\u003eThe EMU-1 can monitor vital engine parameters such as temperature, pressure RPM and fluid levels from up to two engines.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eFully NMEA 2000 Certified\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003eThe EMU-1 has a PC based configuration tool that allows the settings inside the EMU-1 to be changed to best suit the engine it is working with, making it a flexible solution for many engine makes and models.\u003c\/p\u003e\n\n\u003cp\u003e\u003ca href=\"https:\/\/actisense.com\/digitise-analogue-engine-gauges-senders-nmea-2000\/\"\u003e\u003cstrong\u003eLEARN HOW TO CONFIGURE EMU-1\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\n\u003cp\u003eAn Actisense PC to NMEA 2000 Gateway (NGX-1\/NGT-1) is required to configure the EMU-1.\u003c\/p\u003e\n\n\u003cp\u003eThe NGX-1 or NGT-1 can be used to update the firmware, connect the Toolkit and display data on a PC for diagnostic and information purposes, using \u003ca href=\"https:\/\/actisense.com\/software\/\"\u003eNMEA Reader\u003c\/a\u003e.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55952236249428,"sku":"EMU-1","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"actisense-ngt-1-usb-nmea-2000-to-pc-gateway-usb-version-005-ngt-1-usb","title":"Actisense NGT-1-USB NMEA 2000 to PC Gateway - USB version","description":"\u003cp\u003eInterface your PC to the NMEA 2000 bus. The NGT-1 is an intelligent NMEA 2000 gateway able to precisely Transfer messages to and from the NMEA 2000 bus. It is compatible with a wide range of Chartplotters, display and configuration applications available for PCs.\u003c\/p\u003e\n\n\u003cp\u003eUSB Version - NMEA Micro Connector to Type A USB\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55952386720084,"sku":"005-NGT-1-USB","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-1m","title":"Actisense Micro cable assembly 1 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55952849797460,"sku":"A2K-TDC-1M","price":34.19,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-tdc-4m","title":"Actisense Micro cable assembly 4 metre, UL certified cable","description":"\u003ch3\u003eAvailable in various lengths, the cable assemblies can be used as either drop cable from an NMEA 2000 backbone or to extend the length of the backbone cable.\u003c\/h3\u003e\n\n\u003cp\u003eActisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.\u003c\/p\u003e\n\n\u003cp\u003eNMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.\u003c\/p\u003e\n\n\u003cp\u003eThe maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953005642068,"sku":"A2K-TDC-4M","price":44.94,"currency_code":"GBP","in_stock":true}]},{"product_id":"pro-ndc-1e2k","title":"Actisense 5 inputs and 2 ISO-Drive outputs, Ethernet, NMEA 2000 and serial connections","description":null,"brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953375035732,"sku":"PRO-NDC-1E2K","price":530.95,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-t-mff","title":"Actisense Micro T piece","description":"\u003ch2\u003eQuality engineered connectors shaped to allow easy and secure connections.\u003c\/h2\u003e\n\n\u003cp\u003eTwo female and one male connector allow easy connected to Actisense NMEA lite cable assemblies even when field fit connectors are used, making it a totally unique T-piece.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense NMEA 2000 T-Piece is for use where a drop or ‘port’ is required from the NMEA 2000 backbone to connect another device.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953449746772,"sku":"A2K-T-MFF","price":29.96,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ter-f","title":"Actisense Micro terminator female","description":"\u003ch3\u003eActisense terminators are exceptionally robust to withstand the harsh conditions of the marine environment and have been designed for quick and easy installation.\u003c\/h3\u003e\n\n\u003cp\u003eEach NMEA 2000 installation must have precisely two termination resistors installed, on at each end of the backbone, to ensure proper operation and signal integrity.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953456169300,"sku":"A2K-TER-F","price":16.2,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-4wt","title":"Actisense Micro 4-way T piece","description":"\u003ch3\u003eThe 4 Way T-Piece from Actisense saves you time, space and money on your NMEA 2000® installation.\u003c\/h3\u003e\n\n\u003cp\u003eThe Actisense 4 Way T-Piece is for use where multiple drops or ‘ports’ are required from the NMEA 2000 backbone. It’s as quick and easy to install as a single T-Piece, uses less space than two individual T-pieces and costs less than four.\u003c\/p\u003e\n\n\u003cp\u003eThe Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55971554230612,"sku":"A2K-4WT","price":102.38,"currency_code":"GBP","in_stock":true}]},{"product_id":"a80721","title":"Actisense NGW-1 NMEA 0183 to NMEA 2000 Converter Gateway","description":"\u003cp\u003eThe Actisense NGW-1 is an intelligent bi-directional gateway that converts NMEA 0183 data into NMEA 2000 and vice versa, allowing instruments built to the two standards to share information on the same boat. It lets you add a modern NMEA 2000 or Raymarine SeaTalkng backbone while keeping existing NMEA 0183 devices, spreading the cost of upgrading.\u003c\/p\u003e\u003cp\u003eThe standard ISO variant connects to NMEA 0183 devices through a dedicated transmit and receive pair, with opto-isolated input and Actisense ISO-Drive output to protect connected equipment from ground loops. Power is taken directly from the NMEA 2000 network, so no separate supply is needed, and multiple NGW-1 units can be used to multiplex several NMEA 0183 signals onto the network. This is a third-party Actisense product carried by Raymarine; an optional STNG-A06045 adaptor cable connects it directly to a Raymarine SeaTalkng network.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975527317844,"sku":"A80721","price":0.0,"currency_code":"GBP","in_stock":true}]}],"url":"https:\/\/hme.sprechen.dev\/collections\/actisense-nmea-2000.oembed","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}