{"title":"Actisense","description":"\u003cp\u003eActisense is the standard in marine data interfacing. Hudson Marine stocks the full range, from the NGT-1 and W2K-1 gateways to NMEA 2000 cabling, buffers and the EMU-1 engine monitor, with the know-how to get your network talking.\u003c\/p\u003e","products":[{"product_id":"a2k-kit-2a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-6M","description":"\u003cp\u003eThe NMEA 2000 Micro Starter Kit 2a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, two Micro terminators to correctly terminate each end of the backbone, and a longer 6 metre Micro drop cable for connecting a device further from the backbone. Using genuine Actisense components throughout, it is an easy, reliable way to get a network up and running, and it can be expanded later by adding further tees, drops and devices.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015346516,"sku":"A2K-KIT-2a","price":171.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a_4b2c11b6-1e19-4470-aff7-34c5c65e92e5.png?v=1781903795"},{"product_id":"a2k-tdc-0m25","title":"Actisense Micro cable assembly 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-0M25 is a 0.25 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a short drop cable to connect an instrument to the backbone, or to extend the backbone itself where only a small increase in length is needed.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951015674196,"sku":"A2K-TDC-0M25","price":30.43,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_4c923d6d-354a-4536-b58f-2b78faf678b6.png?v=1781903798"},{"product_id":"a2k-pmw-f","title":"Actisense Rear panel mount wired, 5 pin micro female","description":"\u003cp\u003eThe Actisense A2K-PMW-F lets an NMEA 2000 connection pass through a watertight bulkhead or panel without compromising either the network or the barrier it crosses. It is a rear-mounted, pre-wired 5-pin Micro female connector, and its waterproof seals keep the panel and the NMEA 2000 connection watertight. The female version is a neat way to add a pluggable port to a QNB-1 network block, as it can replace any of the existing drop glands.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a nickel-plated brass housing, mounts through a 15.3 mm hole using a PG9 thread and nut, and is pre-fitted with stripped and tinned 18 AWG wires. It is rated to IP67 when mated, meets IEC 61076-2-101, and is NMEA 2000 approved, RoHS compliant and UL certified. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018525012,"sku":"A2K-PMW-F","price":17.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3fb8625a.png?v=1781903802"},{"product_id":"a2k-gcm-0m25","title":"Actisense Micro gender changer (male to male) 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-GCM-0M25 is a 0.25 metre NMEA 2000 Micro gender changer with a male connector at both ends. It solves a common installation problem: joining two cables or devices that both present the same gender of connector on an NMEA 2000 backbone, where a straight connection is impossible. This male to male version mates two female connectors together.\u003c\/p\u003e\u003cp\u003eIt is made with Actisense designed connectors and 0.25 metre UL certified cable, giving an easy and secure connection that matches the quality of the rest of the range. The moulded M12 connectors give an IP67 rated seal once mated. For longer joining or drop cables, Actisense trunk and drop cable assemblies are available in a range of lengths.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951018852692,"sku":"A2K-GCM-0M25","price":31.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-f2d6e4fe.png?v=1781903803"},{"product_id":"a2k-ffc-sm","title":"Actisense Micro field fit connector, straight - male","description":"\u003cp\u003eThe Actisense A2K-FFC-SM is a field-fit connector in the straight, male configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. Because the connector is assembled on site, cables can be cut to any length, which removes excess cable and lets the network be fully customised to the vessel. As the two halves are screwed together an internal gland tightens around the cable to maintain watertight integrity.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020097876,"sku":"A2K-FFC-SM","price":27.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_b28f2bf3-c9ff-4fd3-9486-0946952cc31d.png?v=1781903802"},{"product_id":"a2k-ter-u","title":"Actisense NMEA 2000 Smart Universal Micro Terminator","description":"\u003cp\u003eThe Actisense A2K-TER-U is the world's first intelligent universal in-line terminator for NMEA 2000 networks. Because it ships with blanking caps it can be used as a male terminator, a female terminator or a feed-through in-line terminator, which makes it genuinely universal and ideal for awkward positions such as the top of a mast where the required gender may not be known in advance. It can be fitted at the very end of the backbone or in-line in a location that is difficult to reach.\u003c\/p\u003e\u003cp\u003eWhat sets the TER-U apart is its built-in diagnostic function. A high-accuracy voltage monitoring circuit continuously watches the bus voltage and drives internal LEDs: a green indication confirms the voltage is within the required range and of the correct polarity, while a red indication warns that the voltage has fallen below the minimum required level. If the LEDs do not light at all, there is no power or the polarity is reversed. Because the terminators illuminate, they also confirm at a glance that a terminator is actually present at each end of the network. It houses a 120 ohm resistor, uses gold-plated contacts in glass-filled carriers, carries a UL94 V0 flammability rating and is rated to IP67 when mated. Like the rest of the Actisense range it is NMEA 2000 certified and covered by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020556628,"sku":"A2K-TER-U","price":37.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-b0cfed78.jpg?v=1781903798"},{"product_id":"a2k-ffc-rm","title":"Actisense Micro field fit connector, right-angle male","description":"\u003cp\u003eThe Actisense A2K-FFC-RM is a field-fit connector in the right-angle, male configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. The right-angle body lets the cable leave the connector at 90 degrees, which is useful for tidy routing and for fitting behind panels or around tight bends. Because the connector is assembled on site, cable can be cut to any length and the network fully customised, and an internal gland tightens around the cable as the connector is screwed together to keep the joint watertight.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020786004,"sku":"A2K-FFC-RM","price":28.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_9c24b7b3-e6ee-4280-99ee-708c983913ca.png?v=1781903802"},{"product_id":"a2k-sbn-2","title":"Actisense Self-Contained Boat Network - complete network for eight devices with internal terminators and power feed.","description":"\u003cp\u003eThe Self-Contained Boat Network (SBN-2) makes installing a small NMEA 2000 network quicker and easier than ever. It packs the equivalent of eight tee-pieces into a single over-moulded case with the termination resistors already built in, so there are no separate tees to chain together and no terminators to add. Once the attached three-metre power cable is connected to the boat supply, a correctly terminated network for up to eight devices is ready to use, taking plug and play to the next level.\u003c\/p\u003e\u003cp\u003eBy providing a complete, correctly terminated network in one compact unit, the SBN-2 takes up far less space than a backbone built from individual tees and drops, and reduces the amount of cabling, connectors, cost and weight. Its ruggedised, flame-retardant housing, metal coupling nuts and integrated EMI shield suit wet and harsh marine conditions, while the orange UL-rated power cable is colour coded to stand out from the drop cables. Note that the SBN-2 cannot be extended beyond eight device drops.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020884308,"sku":"A2K-SBN-2","price":119.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-84c4ed64.jpg?v=1781903797"},{"product_id":"a2k-tdc-6m","title":"Actisense Micro cable assembly 6 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-6M is a 6 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. At 6 metres it is the longest permitted single drop cable, ideal for reaching an instrument sited well away from the backbone, and it can equally be used to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951020949844,"sku":"A2K-TDC-6M","price":51.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_c969ec85-6069-4a78-8058-8e6fc9165e4c.png?v=1781903799"},{"product_id":"a2k-gcf-0m25","title":"Actisense Micro gender changer (female to female) 0.25 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-GCF-0M25 is a 0.25 metre NMEA 2000 Micro gender changer with a female connector at both ends. It solves a common installation problem: joining two cables or devices that both present the same gender of connector on an NMEA 2000 backbone, where a straight connection is impossible. This female to female version mates two male connectors together.\u003c\/p\u003e\u003cp\u003eIt is made with Actisense designed connectors and 0.25 metre UL certified cable, giving an easy and secure connection that matches the quality of the rest of the range. The moulded M12 connectors give an IP67 rated seal once mated. For longer joining or drop cables, Actisense trunk and drop cable assemblies are available in a range of lengths.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951021146452,"sku":"A2K-GCF-0M25","price":31.72,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-07ec20c7.png?v=1781903801"},{"product_id":"a2k-screwcap-10-f","title":"Actisense Protective SCREW cover for NMEA 2000 female Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eThe Actisense A2K-SCREWCAP-10-F is a pack of ten protective screw covers designed for female NMEA 2000 Micro connectors. Any unused female port on an NMEA 2000 network, such as a spare connection on a T-piece, drop or terminator, should be capped to keep out dust and moisture and to protect the contacts and threads; these caps screw onto the connector to do exactly that.\u003c\/p\u003e\u003cp\u003eThe covers match the female Micro connectors used across the Actisense NMEA 2000 range and are supplied in a bag of ten for convenient stocking during an installation. They are backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951022555476,"sku":"A2K-SCREWCAP-10-F","price":17.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-eb303476.png?v=1781903801"},{"product_id":"pro-buf-2","title":"Actisense 2 OPTO inputs, 12 ISO-Drive outputs, Serial Port, Ethernet port, standard configuration, pluggable screw terminals","description":"\u003cp\u003eThe Actisense PRO-BUF-2 is an intelligent, RINA type approved NMEA 0183 buffer built for larger leisure vessels and commercial shipping. It takes data from a single source and distributes it as amplified, isolated streams across twelve outputs, so every listener on the network receives a clean signal at the correct voltage. Two OPTO-isolated inputs and twelve ISO-Drive isolated outputs give complete protection against ground loops, the leading cause of failure in NMEA 0183 systems.\u003c\/p\u003e\u003cp\u003eAlongside the NMEA 0183 ports the PRO-BUF-2 offers a bi-directional isolated serial port and an Ethernet port, allowing NMEA 0183 data to be streamed over a network and the unit to be configured through any web browser regardless of operating system. Predefined modes are selected simply by hard-wiring the mode inputs, while User Configuration Mode unlocks advanced sentence filtering, routing and automatic baud rate matching.\u003c\/p\u003e\u003cp\u003eHoused in rugged 316 stainless steel with two-part pluggable screw terminals, an alarm relay and diagnostic LEDs, the PRO-BUF-2 mounts to a bulkhead or DIN rail and is ready to install straight out of the box.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951024030036,"sku":"PRO-BUF-2","price":733.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-4e57779b.png?v=1781903801"},{"product_id":"a2k-mpt-2","title":"Actisense Micro female connectors, 3 metre UL certified cable, left and right power feed pairs","description":"\u003cp\u003eThe A2K-MPT-2 is a simple, safe and efficient way to feed power into an NMEA 2000 backbone. This Micro Power T inserts into the backbone through two Micro (M12) female connectors, providing plug-and-play connectivity, and carries a three-metre UL-certified power cable for complete flexibility when routing to the boat supply. Actisense-designed connectors are shaped for easy, secure mating, the cable now benefits from improved strain relief, and with its two female connectors the power T is also fully DeviceNet compatible.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951060697428,"sku":"A2K-MPT-2","price":46.01,"currency_code":"GBP","in_stock":true}]},{"product_id":"a2k-ffc-rf","title":"Actisense Micro field fit connector, right-angle female","description":"\u003cp\u003eThe Actisense A2K-FFC-RF is a field-fit connector in the right-angle, female configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. The right-angle body lets the cable leave the connector at 90 degrees, which is useful for tidy routing and for fitting behind panels or around tight bends. Because the connector is assembled on site, cable can be cut to any length and the network fully customised, and an internal gland tightens around the cable as the connector is screwed together to keep the joint watertight.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951060730196,"sku":"A2K-FFC-RF","price":28.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c_55d3731d-904d-447f-bcf4-2d1908ce975c.png?v=1781903801"},{"product_id":"a2k-screwcap-10-m","title":"Actisense Protective SCREW cover for NMEA 2000 male Micro connectors (Bag of 10 pieces)","description":"\u003cp\u003eThe Actisense A2K-SCREWCAP-10-M is a pack of ten protective screw covers designed for male NMEA 2000 Micro connectors. Any unused male port on an NMEA 2000 network, such as a spare connection on a T-piece, drop or terminator, should be capped to keep out dust and moisture and to protect the contacts and threads; these caps screw onto the connector to do exactly that.\u003c\/p\u003e\u003cp\u003eThe covers match the male Micro connectors used across the Actisense NMEA 2000 range and are supplied in a bag of ten for convenient stocking during an installation. They are backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951062630740,"sku":"A2K-SCREWCAP-10-M","price":17.76,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-a1a57320.gif?v=1781903801"},{"product_id":"pro-ndc-1e","title":"Actisense 5 inputs and 2 ISO-Drive outputs, Ethernet and serial connections","description":"\u003cp\u003eThe Actisense PRO-NDC-1E is a RINA type approved NMEA 0183 multiplexer that brings intelligent, robust data handling to any 0183 network. Its five NMEA 0183 inputs can be routed to either of the two NMEA 0183 outputs, creating a highly customisable network, while industry-leading isolation on every input and output protects connected instruments from the ground loops that are the number one cause of NMEA 0183 product failure.\u003c\/p\u003e\u003cp\u003eFive OPTO-isolated inputs and two ISO-Drive isolated outputs are complemented by a bi-directional serial port, for communication with a PC using the USBKIT-PRO USB-serial converter, and an Ethernet port for streaming NMEA 0183 data over a network. Configuration is handled by a web-based tool reached through any browser over Ethernet, so there are no operating system compatibility issues, and each output can be fine-tuned with sentence filtering and configurable baud rates that let 4800 and 38400 baud devices share the same multiplexer.\u003c\/p\u003e\u003cp\u003eHoused in rugged 316 stainless steel with two-part pluggable connectors and diagnostic LEDs, the PRO-NDC-1E mounts to a bulkhead or, with the optional DIN-KIT-1, to a DIN rail.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951063253332,"sku":"PRO-NDC-1E","price":442.68,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-cee00cd2.png?v=1781903802"},{"product_id":"a2k-tdc-5m","title":"Actisense Micro cable assembly 5 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-5M is a 5 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951064564052,"sku":"A2K-TDC-5M","price":48.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a.png?v=1781903798"},{"product_id":"a2k-kit-1a","title":"Actisense Micro starter kit - contains MPT-2, TER-M x2, T-MFF(x2) TDC-2M","description":"\u003cp\u003eThe NMEA 2000 Micro Starter Kit 1a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, two Micro terminators to correctly terminate each end of the backbone, and a 2 metre Micro drop cable to connect your first device. Using genuine Actisense components throughout, it is an easy, reliable way to get a network up and running, and it can be expanded later by adding further tees, drops and devices.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951065809236,"sku":"A2K-KIT-1a","price":162.47,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a_37beac27-2a9b-4849-9d0c-be8e9d01c9a7.png?v=1781903794"},{"product_id":"a2k-kit-4a","title":"Actisense Micro Starter Kit - contains MPT-2, TER-U(x2), T-MFF(x2), TDC-4M","description":"\u003cp\u003eThe NMEA 2000 Micro Smart Starter Kit 4a from Actisense provides everything needed to build a small NMEA 2000 network from scratch. It combines an A2K-MPT-2 Micro Power T to feed the backbone, two Micro tee-pieces to create device drops, a 4 metre Micro drop cable, and, in place of standard terminators, two A2K-TER-U Smart Universal Micro Terminators. These intelligent terminators can be fitted at either end of the backbone and provide added network diagnostics, making this the smart choice for a reliable, easy-to-monitor network. Built from genuine Actisense components, the kit is fully expandable as your system grows.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951066005844,"sku":"A2K-KIT-4a","price":214.85,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-89c6459a.png?v=1781903794"},{"product_id":"a2k-4wd-1","title":"Actisense Micro 4-Way Drop","description":"\u003cp\u003eThe Actisense Micro 4-Way Drop is a single connection point that splits out to four device drops on an NMEA 2000 network, making it far easier to reach several instruments that are grouped together. Where four devices would normally each need their own T-piece and drop cable, or the backbone would have to be routed closer to them, the 4-Way Drop brings a single 2 m lead to the cluster and provides four female connection points from it.\u003c\/p\u003e\u003cp\u003eThe assembly terminates in one male connector for the backbone side and four female connectors for the device drops, and uses the same UL-certified Micro cable and gold-plated contacts as the rest of the Actisense connector range. As with any NMEA 2000 network, the total drop length to any device must not exceed 6 m. It is backed by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951066038612,"sku":"A2K-4WD-1","price":96.98,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-446c6fa7.png?v=1781903797"},{"product_id":"pro-nbf-1","title":"Actisense 1 OPTO inputs, 6 ISO-Drive outputs, Serial Port,  pluggable screw terminals","description":"\u003cp\u003eThe Actisense PRO-NBF-1 is a RINA type approved NMEA 0183 buffer that safely connects one talker to as many as six listeners. It isolates and buffers the incoming NMEA 0183 data, distributing up to six identical, amplified streams from a single source so that every listener receives data at the required voltage level and consistent quality is maintained across the network.\u003c\/p\u003e\u003cp\u003eIsolation on both the input and the outputs protects the source talker and every connected listener. A single OPTO-isolated input and six ISO-Drive isolated outputs let the buffer be wired in with complete peace of mind, eliminating the ground loops that are the leading cause of NMEA 0183 equipment failure. The unit needs no configuration and works with RS422, RS232 and RS485 connections at up to 115200 baud with automatic autobaud detection.\u003c\/p\u003e\u003cp\u003eThe rugged 316 stainless steel housing also acts as an RF shield, making it an ideal addition to commercial installations. Two-part pluggable screw terminals and a professional DIN rail mounting system make installation quick, and diagnostic LEDs confirm power, input and output activity at a glance.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951067382100,"sku":"PRO-NBF-1","price":280.48,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-670bfb69.png?v=1781903801"},{"product_id":"a2k-pmw-m","title":"Actisense Rear panel mount wired, 5 pin micro male","description":"\u003cp\u003eThe Actisense A2K-PMW-M lets an NMEA 2000 connection pass through a watertight bulkhead or panel without compromising either the network or the barrier it crosses. It is a rear-mounted, pre-wired 5-pin Micro male connector, and its waterproof seals keep the panel and the NMEA 2000 connection watertight, providing a tidy and permanent way to bring the network through a console, locker or bulkhead.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a nickel-plated brass housing, mounts through a 15.3 mm hole using a PG9 thread and nut, and is pre-fitted with stripped and tinned 18 AWG wires. It is rated to IP67 when mated, meets IEC 61076-2-101, and is NMEA 2000 approved, RoHS compliant and UL certified. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951068234068,"sku":"A2K-PMW-M","price":17.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3fb8625a_96021fbb-84ed-497d-8fbf-a200586a37f6.png?v=1781903803"},{"product_id":"a2k-tdc-3m","title":"Actisense Micro cable assembly 3 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-3M is a 3 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951070855508,"sku":"A2K-TDC-3M","price":41.34,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_0fc3931b-fdcb-4a9c-9561-3ebd28484763.png?v=1781903798"},{"product_id":"a2k-ter-m","title":"Actisense Micro terminator male","description":"\u003cp\u003eThe Actisense A2K-TER-M is a male Micro termination resistor for NMEA 2000 networks. Every NMEA 2000 backbone must have exactly two termination resistors fitted, one at each end, to give the bus its correct electrical characteristics and to preserve signal integrity. This is the male version, for use where the end of the backbone presents a female connector.\u003c\/p\u003e\u003cp\u003eThe terminator houses a 120 ohm resistor and uses gold-plated brass male contacts in a glass-filled carrier and rugged PVC housing, so it is exceptionally robust in harsh marine conditions while remaining quick and secure to fit. It is UL certified to UL1277, rated to IP67 when mated, and is fully NMEA 2000 certified and covered by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071019348,"sku":"A2K-TER-M","price":16.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-62309bc4.png?v=1781903797"},{"product_id":"a2k-bulk-100m","title":"Actisense Micro bulk cable reel, 100 metres, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-BULK-100M is a 100 metre reel of genuine Actisense NMEA 2000 Lite bulk cable, used to create or extend a network backbone to whatever length an installation needs. It is supplied as bare cable with no connectors, so it is ideal for use with the Actisense QNB-1 Quick Network Block or with Field Fit Connectors, letting you cut and terminate each run to the exact length required.\u003c\/p\u003e\u003cp\u003eThe cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. Lite cable can build a backbone up to 100 metres long; where a longer run is required the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections within the 100 metre maximum.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071084884,"sku":"A2K-BULK-100M","price":413.17,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-a2kbulk100m_1_new.jpg?v=1783022293"},{"product_id":"a2k-tdc-10m","title":"Actisense Micro cable assembly 10 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-10M is a 10 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. At 10 metres it is used to extend the backbone, providing a long, ready-terminated run between devices without the need for field-fit connectors.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951071969620,"sku":"A2K-TDC-10M","price":69.7,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_64c54223-0f7f-4a08-a9c5-bd2fba880298.png?v=1781903799"},{"product_id":"a2k-tdc-2m","title":"Actisense Micro cable assembly 2 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-2M is a 2 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951073935700,"sku":"A2K-TDC-2M","price":37.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_9111a42a-4070-4951-abf4-cc9fa3a19ac3.png?v=1781903799"},{"product_id":"a2k-ffc-sf","title":"Actisense Micro field fit connector, straight - female","description":"\u003cp\u003eThe Actisense A2K-FFC-SF is a field-fit connector in the straight, female configuration, used to terminate bulk Actisense Lite cable on an NMEA 2000 network. Because the connector is assembled on site, cables can be cut to any length, which removes excess cable and lets the network be fully customised to the vessel. As the two halves are screwed together an internal gland tightens around the cable to maintain watertight integrity.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass contacts and a PA and glass-filled body with a stainless steel screw and TPU insert, and accepts 6 to 8 mm cable through a PG9 gland. It is rated to IP67 in the locked condition, meets IEC 61076-2-101, and is NMEA 2000 approved and RoHS compliant. It carries the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951074492756,"sku":"A2K-FFC-SF","price":27.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-60d08e9c.png?v=1781903798"},{"product_id":"db9-f","title":"Actisense 9 pin, D type moulded cable assembly (female)","description":"\u003cp\u003eThe Actisense DB9-F is a 9-pin D-type moulded cable assembly with a female connector, supplied ready-made with the DB9 fitted at one end and bare wires at the other. The female 9-pin D-Sub follows the standard RS232 pin-out, making it a convenient way to wire an Actisense NMEA device or serial connection to equipment fitted with a standard 9-pin serial port.\u003c\/p\u003e\u003cp\u003eThe moulded connector provides a durable, strain-relieved termination, saving the time and uncertainty of assembling a D-type connector by hand.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951122334036,"sku":"DB9-F","price":11.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3523294f.png?v=1781903807"},{"product_id":"usbkit-pro","title":"Actisense USB To Serial Adapter for use with PRO range products and EMU-1","description":"\u003cp\u003eThe Actisense USBKIT-PRO is a USB to serial adapter for use with the Actisense PRO range products and the EMU-1. It contains a USB-serial converter with the necessary Rx, Tx and ground connections already terminated, letting you connect a PRO range multiplexer, buffer or the EMU-1 to a PC through its serial port without needing a separate serial cable and USB converter.\u003c\/p\u003e\u003cp\u003eUsing the USBKIT-PRO makes configuration and firmware updates quick and simple, providing a direct, reliable link between the Actisense device and Actisense software running on the computer.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951133638996,"sku":"USBKIT-PRO","price":38.35,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c58d09b4.jpg?v=1781903804"},{"product_id":"opto-4","title":"Actisense NMEA 0183 PC Opto-isolator cable, RS232 DB9 female, shielded (isolated to PC)","description":"\u003cp\u003eThe Actisense OPTO-4 is a serial opto-isolator cable that provides a safe, low-cost way to connect an NMEA 0183 system to a PC. From version 2.0 onwards the NMEA 0183 specification requires isolated, differential listener inputs, but a standard PC RS232 port is neither isolated nor differential. The OPTO-4 bridges that gap, allowing an RS422 or standard RS232 connection to meet the NMEA 0183 listener requirement and protecting equipment from the ground loops common in a marine environment.\u003c\/p\u003e\u003cp\u003eThe RS232 end is a female 9-pin D-Sub (DB9) connector following the standard RS232 pin-out, and the cable powers itself from the RS232 port's TX and handshaking lines, so in most installations no external supply is needed. An over-moulded case gives excellent water resistance and a small footprint for tight installations.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951137276244,"sku":"OPTO-4","price":96.41,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-dcc3dde9.png?v=1781903805"},{"product_id":"usg-2cable","title":"Actisense Spare shielded cable for connecting USG-2 to PC","description":"\u003cp\u003eThe Actisense USG-2CABLE is the genuine replacement lead for connecting a USG-2 isolated USB to serial gateway to a PC. It is a high quality shielded USB Type-A to Type-B cable, 2.0 metres long, supplied with the custom USB Type-B sealing plug that mates with the gateway's high-retention socket to maintain its water resistance.\u003c\/p\u003e\u003cp\u003eKeeping a spare on board, or replacing a damaged original, ensures the USG-2 continues to deliver a reliable, low-noise connection between the vessel's NMEA 0183 network and an onboard computer.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951143928148,"sku":"USG-2CABLE","price":11.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-68388679.jpg?v=1781903804"},{"product_id":"ngx-1-iso","title":"Actisense NMEA 0183 to NMEA 2000 Gateway, with PC interface (ISO connection)","description":"\u003cp\u003eThe NGX-1 is Actisense's intelligent dual gateway, combining the capability of the earlier NGT-1 and NGW-1 into one flexible, cost-effective device. Configure it as an NMEA 2000 to PC interface or as a bi-directional NMEA 0183 to NMEA 2000 conversion gateway, so a single unit covers both jobs.\u003c\/p\u003e\u003cp\u003eThis ISO version terminates in a bare-wire, open-ended cable for direct connection to an NMEA 0183 device or a serial port \/ DB-9. Its opto-isolated input and ISO-Drive output safely interface with RS232 or RS422 signals, while data transfers at up to 230,400 baud with support for fast heading at 10Hz. Used as a PC interface, the NGX-1 acts as a rule-enforcing firewall between the computer and the network, giving full control of the data that passes to and from the bus.\u003c\/p\u003e\u003cp\u003eHoused in a rugged IP67 polycarbonate case and fully NMEA 2000 certified, the NGX-1 works with the free Actisense NMEA Reader diagnostic software and is configured through Actisense Toolkit. It carries the largest conversion library of any Actisense gateway, including AIS.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951172927828,"sku":"NGX-1-ISO","price":215.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-d581c8f7.png?v=1781903804"},{"product_id":"wgx-1-iso","title":"Actisense Wi-Fi NMEA 0183 to NMEA 2000 Gateway, with PC interface (ISO connection)","description":"\u003cp\u003eThe WGX-1 is Actisense's ultimate gateway, combining NMEA 0183 and NMEA 2000 conversion, PC interfacing and Wi-Fi streaming in a single intelligent device where other manufacturers need several. It streams data from an NMEA 2000 backbone to any Wi-Fi device such as a laptop, tablet or smartphone, and converts bi-directionally between NMEA 0183 and NMEA 2000 using Actisense's renowned conversion engine.\u003c\/p\u003e\u003cp\u003eActing as a wired gateway as well, the WGX-1 transfers and converts data between existing NMEA 0183 and NMEA 2000 instruments and interfaces a PC to the network. Its opto-isolated input and ISO-Drive output safely handle NMEA 0183, RS232 or RS422 signals over a 0.75m ISO cable, with data transfer up to 230,400 baud and support for fast heading at 10Hz. Data can be logged to a user-fitted micro SD card for post-voyage analysis.\u003c\/p\u003e\u003cp\u003eFully NMEA 2000 certified and built into an extremely rugged IP67 case with an internal antenna, the WGX-1 includes the Actisense-i network health checker, enhanced password security and remote firmware upgradability, and is configured through Actisense Toolkit.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951173058900,"sku":"WGX-1-ISO","price":301.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-wgx-1-iso_v2.jpg?v=1783022092"},{"product_id":"din-kit-2","title":"Actisense Kit of 1 clip \u0026 2 screws. Use with USG-2 on top hat (EN 50 022) or G section (EN 50 035) rails","description":"\u003cp\u003eThe DIN-KIT-2 lets you mount the Actisense USG-2 onto a DIN rail for a tidy, secure installation inside a console or equipment cabinet. Designed for the USG-2 Hydra-case gateway, the kit contains one clip and two screws and suits both top-hat rail (type EN 50 022) and G-section rail (type EN 50 035), giving a robust, standardised way to fix the unit in place without drilling into it.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951180726612,"sku":"DIN-KIT-2","price":13.21,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-a30175e1.png?v=1781903807"},{"product_id":"w2k-2","title":"Actisense Wi-Fi to NMEA 2000 Gateway","description":"\u003cp\u003eThe W2K-2 is a rugged and reliable NMEA 2000 to Wi-Fi gateway with a built-in data logger and the Actisense-i suite of network diagnostic tools. It streams data from an NMEA 2000 backbone to any Wi-Fi device such as a laptop, tablet or smartphone, and converts that data to and from NMEA 0183 using Actisense's renowned conversion engine so it works with a huge range of navigation apps.\u003c\/p\u003e\u003cp\u003eEvery message on the network, or a selected subset, can be recorded to a user-fitted micro SD card of up to 128GB as an EBL log file, ideal for race analysis, logbooks, fault diagnosis or sharing a voyage. The unit supports both TCP and UDP with up to three separate data servers and can act as a Wi-Fi access point and a client on an existing network at the same time. Actisense-i continuously reports bus voltage and the status of every device on the network.\u003c\/p\u003e\u003cp\u003eFully NMEA 2000 certified and built into an extremely rugged IP67 case with an internal antenna, the W2K-2 adds WPA3 password security and remote firmware upgradability, with every unit shipping with a unique default SSID and password.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951181447508,"sku":"W2K-2","price":238.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-853a49f5.png?v=1781903805"},{"product_id":"din-kit-1","title":"Actisense Kit of 2 clips \u0026 4 screws. Use with NDC-5, EMU-1-BAS \u0026 NBF-3-BAS on top hat (EN 50 022) or G section (EN 50 035) rails","description":"\u003cp\u003eThe DIN-KIT-1 lets you mount Actisense Titan-case products onto a DIN rail for a tidy, secure installation inside a console or equipment cabinet. The kit contains two clips and four screws and is designed for use with the NDC-5, EMU-1-BAS and NBF-3-BAS units. It suits both top-hat rail (type EN 50 022) and G-section rail (type EN 50 035), giving a robust, standardised way to fix devices in place without drilling into the unit.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951182430548,"sku":"DIN-KIT-1","price":15.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-9cff2aa8.png?v=1781903807"},{"product_id":"usg-2","title":"Actisense Isolated USB To Serial Gateway for use with NMEA 0183, RS422 and RS232","description":"\u003cp\u003eThe Actisense USG-2 turns a PC USB port into a bi-directional serial port suitable for connecting to a marine standard NMEA 0183 data bus. It provides a far safer connection than an ordinary USB-to-serial converter, using an OPTO-isolated input and an ISO-Drive isolated output to keep the PC and the boat's electronics electrically separate and free from the ground loops that damage connected equipment.\u003c\/p\u003e\u003cp\u003eThe isolated input uses Actisense OPTO-isolation circuitry to protect connected devices and can receive the very low level signals that a standard PC serial port often cannot. Fully NMEA 0183, RS422 and RS232 compatible, the USG-2 supports baud rates from 300 to 230400 bps, and its encapsulated, potted electronics give a high level of water and ingress protection.\u003c\/p\u003e\u003cp\u003eA high quality shielded USB lead is included, mating with a high-retention USB socket for a secure, water-resistant connection, and a pluggable screwless connector with locking latch makes the NMEA side quick to wire. Three LEDs confirm power and data activity, and the unit mounts to a bulkhead with an optional DIN rail kit available.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951182823764,"sku":"USG-2","price":132.04,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-0d2c2984.png?v=1781903805"},{"product_id":"ngx-1-usb","title":"Actisense NMEA 0183 to NMEA 2000 Gateway, with PC interface (USB connection)","description":"\u003cp\u003eThe NGX-1 is Actisense's intelligent dual gateway, combining the capability of the earlier NGT-1 and NGW-1 into one flexible, cost-effective device. Configure it as an NMEA 2000 to PC interface or as a bi-directional NMEA 0183 to NMEA 2000 conversion gateway, so a single unit covers both jobs.\u003c\/p\u003e\u003cp\u003eThis USB version is fitted with a moulded USB cable for genuine plug-and-play connectivity with a PC or Mac, and is fully galvanically isolated to prevent dangerous ground loops. Data transfers at up to 230,400 baud with support for fast heading at 10Hz. Used as a PC interface, the NGX-1 acts as a rule-enforcing firewall between the computer and the network, giving full control of the data that passes to and from the bus.\u003c\/p\u003e\u003cp\u003eHoused in a rugged IP67 polycarbonate case and fully NMEA 2000 certified, the NGX-1 works with the free Actisense NMEA Reader diagnostic software and is configured through Actisense Toolkit. It carries the largest conversion library of any Actisense gateway, including AIS.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951182889300,"sku":"NGX-1-USB","price":230.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-77d63704.png?v=1781903805"},{"product_id":"qnb-1-pmw","title":"Actisense NMEA 2000 Network Block, 6 micro female drops, power feed and diagnostic features","description":"\u003cp\u003eThe Quick Network Block QNB-1-PMW gives NMEA 2000 backbones fault-free, fused connections in a single sealed enclosure, replacing a string of individual tee-pieces with one IP66 block offering six drops. It is perfectly suited to areas of high instrument density where several sensors and displays sit close together. This version is fitted with six standard NMEA 2000 M12 (micro-fit) female connectors for true plug-and-play installation, with minimal wiring required, while the backbone glands at the top still allow any cable, including Raymarine SeaTalk NG, to be stripped and wired in to create hybrid networks without adaptor cables.\u003c\/p\u003e\u003cp\u003eThe QNB-1-PMW powers the left and right sides of the backbone independently, each protected by its own clearly visible ATO fuse. Feeding each half separately reduces voltage drop and means a blown fuse on one side leaves the other half running, adding useful redundancy. LED indicators report power, reversed polarity, fuse status and the presence of data on the bus, so an installer can diagnose a network at a glance. No software or setup is required.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951196684628,"sku":"QNB-1-PMW","price":372.71,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-qnb-1-pmw_1_new.jpg?v=1783022315"},{"product_id":"rj45-ffc","title":"Actisense RJ45 Waterproof Ethernet Connector for use with NDC-5","description":"\u003cp\u003eThe RJ45-FFC is a waterproof, field-fit RJ45 Ethernet connector for use with the Actisense NDC-5. It lets you terminate Ethernet cabling to your own length on-site, so runs can be tailored exactly to the installation, reducing cost, waste and overall weight on board. Built for demanding marine environments, its waterproof design maintains stable, reliable data connections in wet conditions, while field termination keeps installations quick and flexible without compromising connection integrity.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951201763668,"sku":"RJ45-FFC","price":13.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-93cab167.jpg?v=1781903804"},{"product_id":"a2k-tdc-0m5","title":"Actisense Micro cable assembly 0.5 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-0M5 is a 0.5 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself where a short increase in length is needed.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55951263727956,"sku":"A2K-TDC-0M5","price":33.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_c48aff84-21c3-4e32-9ba8-ac0c5193a95b.png?v=1781903798"},{"product_id":"a2k-tdc-1m","title":"Actisense Micro cable assembly 1 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-1M is a 1 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55952849797460,"sku":"A2K-TDC-1M","price":34.19,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_381b8839-072a-4e2d-b470-1b44fc3babee.png?v=1781903799"},{"product_id":"a2k-tdc-4m","title":"Actisense Micro cable assembly 4 metre, UL certified cable","description":"\u003cp\u003eThe Actisense A2K-TDC-4M is a 4 metre NMEA 2000 Micro cable assembly, fitted with a male connector at one end and a female connector at the other so it plugs straight into a standard NMEA 2000 network. It can be used as a drop cable to connect an instrument to the backbone, or to extend the backbone itself.\u003c\/p\u003e\u003cp\u003eOnly genuine Actisense UL certified cable is used, so the assembly carries the same quality reassurance as the rest of the range. The cable carries five wires in a single waterproof jacket: a power pair, a data (signal) pair and a drain wire. The drain connects to the cable shield, protecting the signal, power and ground wires from radio frequency interference and helping to reduce emissions from the cable. The moulded M12 connectors give a secure, IP67 rated connection once mated.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953005642068,"sku":"A2K-TDC-4M","price":44.94,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-54797a8a_62b2789a-a7f9-4729-93bb-488e75230ff2.png?v=1781903799"},{"product_id":"pro-ndc-1e2k","title":"Actisense 5 inputs and 2 ISO-Drive outputs, Ethernet, NMEA 2000 and serial connections","description":"\u003cp\u003eThe Actisense PRO-NDC-1E2K is the world-first RINA type approved multiplexer to combine three connectivity protocols in one device: NMEA 0183, NMEA 2000 and Ethernet. Built on the proven PRO-NDC platform, it takes five OPTO-isolated NMEA 0183 inputs and two ISO-Drive isolated outputs and adds a direct NMEA 2000 M12 backbone connection, letting legacy 0183 instruments and a modern NMEA 2000 network exchange data without a separate gateway.\u003c\/p\u003e\u003cp\u003eBi-directional conversion is handled by the renowned Actisense conversion library built into the unit, so data can move between NMEA 0183, NMEA 2000, N2K ASCII and Actisense proprietary formats. Advanced sentence-level filtering, data routing and automatic failover between primary, secondary and tertiary sources give the installer precise control over what data flows where, and high-speed Ethernet streaming shares NMEA data across connected networks. Everything is configured through a web browser over Ethernet, with no operating system compatibility issues and no crossover cable required.\u003c\/p\u003e\u003cp\u003eHoused in rugged 316 stainless steel with two-part pluggable connectors that accept both screw and screwless terminals, plus diagnostic LEDs on every port, the PRO-NDC-1E2K mounts to a bulkhead or, with the optional DIN-KIT-1, to a DIN rail.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953375035732,"sku":"PRO-NDC-1E2K","price":530.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/005-pro-ndc-1e2k_v2.jpg?v=1783022326"},{"product_id":"pro-mux-2","title":"Actisense 8 OPTO inputs, 6 ISO-Drive outputs, Serial, Ethernet port, advanced data filtering and routing, pluggable screw terminals","description":"\u003cp\u003eThe Actisense PRO-MUX-2 is an intelligent, RINA type approved NMEA 0183 multiplexer that cures the interconnectivity headaches common in busy marine networks. Its eight NMEA 0183 inputs can be routed to any of the six NMEA 0183 outputs, providing a highly customisable network, while industry-leading isolation on every input and output keeps connected devices safe from the hazardous ground loops that are the number one cause of NMEA 0183 product failure.\u003c\/p\u003e\u003cp\u003eEight OPTO-isolated inputs and six ISO-Drive isolated outputs combine data intelligently, with advanced features including data rate conversion, auto-switching and sentence-based routing and blocking. A bi-directional serial port and an Ethernet port allow simple configuration and diagnostics: the web-based tool is reached through any browser over Ethernet, so there are no operating system compatibility issues, and a direct PC connection needs no crossover cable.\u003c\/p\u003e\u003cp\u003eBuilt into a rugged 316 stainless steel housing with two-part pluggable connectors, an alarm relay and diagnostic LEDs, the PRO-MUX-2 mounts to a bulkhead or, with optional brackets, to a DIN rail for secure installation in high-vibration environments.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953443848532,"sku":"PRO-MUX-2","price":768.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-8b3eb142.png?v=1781903802"},{"product_id":"a2k-t-mff","title":"Actisense Micro T piece","description":"\u003cp\u003eThe Actisense Micro T-Piece is used wherever a single drop or port is needed from an NMEA 2000 backbone to connect an additional device. Its quality-engineered connectors are shaped for easy, secure mating, and the tee accepts Actisense Micro cable assemblies even when field-fit connectors have been used to make them up, which makes it unusually flexible when a network is built or altered on board.\u003c\/p\u003e\u003cp\u003eThe T-piece presents two female connectors and one male connector, each with gold-plated contacts and a glass-filled contact carrier, housed in a rugged PVC body. It is UL certified to UL1277, rated to IP67 when mated and, like the rest of the Actisense connector range, is fully NMEA 2000 certified and covered by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953449746772,"sku":"A2K-T-MFF","price":29.96,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-d62d041c.png?v=1781903796"},{"product_id":"a2k-ter-f","title":"Actisense Micro terminator female","description":"\u003cp\u003eThe Actisense A2K-TER-F is a female Micro termination resistor for NMEA 2000 networks. Every NMEA 2000 backbone must have exactly two termination resistors fitted, one at each end, to give the bus its correct electrical characteristics and to preserve signal integrity. This is the female version, for use where the end of the backbone presents a male connector.\u003c\/p\u003e\u003cp\u003eThe terminator houses a 120 ohm resistor and uses gold-plated phosphor bronze female contacts in a glass-filled carrier and rugged PVC housing, so it is exceptionally robust in harsh marine conditions while remaining quick and secure to fit. It is UL certified to UL1277, rated to IP67 when mated, and is fully NMEA 2000 certified and covered by the standard 5 year Actisense guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55953456169300,"sku":"A2K-TER-F","price":16.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-96ad8a10.png?v=1781903794"},{"product_id":"a2k-4wt","title":"Actisense Micro 4-way T piece","description":"\u003cp\u003eThe Actisense Micro 4-Way T-Piece is used wherever several drops or ports are needed from an NMEA 2000 backbone in the same location. Rather than fitting four separate T-pieces along the trunk, this single block provides four device connection points in one compact housing, saving both time and space during installation while costing less than four individual tees.\u003c\/p\u003e\u003cp\u003eIt carries five female connectors and one male connector, all built with gold-plated contacts and a glass-filled contact carrier, and connects directly to Actisense UL-certified Micro cable assemblies. The flame-retardant, halogen-free TPU housing includes a copper foil shield, and the mated connection is rated to IP67. Like the rest of the Actisense connector range it is fully NMEA 2000 certified and backed by the standard 5 year guarantee.\u003c\/p\u003e","brand":"Actisense","offers":[{"title":"Default Title","offer_id":55971554230612,"sku":"A2K-4WT","price":102.38,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-f0d49c24.png?v=1781903796"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/collections\/actisense.png?v=1780931531","url":"https:\/\/hme.sprechen.dev\/collections\/actisense.oembed?page=2","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}