{"title":"Garmin Autopilot Spares","description":"\u003ch2\u003eGarmin Autopilot Spares\u003c\/h2\u003e\u003cp\u003eGarmin pairs decades of GPS heritage with some of the most capable sonar and chartplotting on the water. This is the Garmin autopilot spares range: replacement parts to keep an autopilot in service.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/garmin\"\u003eGarmin range\u003c\/a\u003e or \u003ca href=\"\/collections\/spares\"\u003eAutopilot Spares from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"garmin-cradle-for-reactor-autopilot-remote-control-010-12833-15","title":"Garmin Cradle for Reactor Autopilot Remote Control","description":"\u003cp\u003eThis replacement cradle holds a Garmin Reactor autopilot remote control securely in its mounting location, keeping the handset to hand and stowed when not in use. It restores the remote's docking point if the original cradle is lost or damaged.\u003c\/p\u003e\u003cp\u003eThe cradle is intended for the compatible Reactor autopilot remote control and fixes in place at the helm or another convenient spot.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951022326100,"sku":"010-12833-15","price":22.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-8ff5da3e.png?v=1781903129"},{"product_id":"garmin-ghp-reactor-40-steer-by-wire-course-computer-unit-010-11052-65","title":"Garmin GHP Reactor 40 Steer By Wire Course Computer Unit","description":"\u003cp\u003eThe Garmin GHP Reactor 40 Steer By Wire Course Computer Unit (CCU) is the central sensor and steering interface of a steer-by-wire Reactor 40 autopilot. It contains a solid-state attitude and rate-of-turn sensor for the primary heading reference and commands the boat compatible electronic steering system directly, so no hydraulic pump or mechanical drive is required.\u003c\/p\u003e\u003cp\u003eSealed to IPX7, the CCU must be mounted away from sources of magnetic interference and tested with a handheld compass during installation. It serves as a core component of steer-by-wire Reactor 40 systems and as a service or replacement part.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951068365140,"sku":"010-11052-65","price":1729.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-6b3037af.jpg?v=1781903010"},{"product_id":"garmin-ghp-reactor-40-ccu-volvo-penta-010-11052-68","title":"Garmin GHP Reactor 40 CCU Volvo Penta","description":"\u003cp\u003eThis Garmin GHP Reactor 40 Course Computer Unit (CCU) is configured for use with Volvo Penta electronic steering systems. It contains a solid-state attitude and rate-of-turn sensor that provides the primary heading reference for the autopilot and communicates with the helm control over the autopilot network.\u003c\/p\u003e\u003cp\u003eSealed to IPX7, the CCU must be mounted away from sources of magnetic interference and tested with a handheld compass during installation. It serves as a core component of Reactor 40 steer-by-wire systems on Volvo Penta vessels and as a service or replacement part.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951077867860,"sku":"010-11052-68","price":1729.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-ec1a81d9.jpg?v=1781903009"},{"product_id":"interconnect-cable-hydraulic-010-11351-30","title":"Interconnect Cable (Hydraulic)","description":"\u003cp\u003eInterconnect cable that connects a Garmin GHP Reactor autopilot course computer unit (CCU) to its electronic control unit (ECU). The 5m lead includes bare wire connections for a buzzer and an optional Shadow Drive valve, and the ECU connector has a quarter-turn collar compatible with ECU 10 systems.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951116992852,"sku":"010-11351-30","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-52f615a5.png?v=1781903964"},{"product_id":"ecu-14-010-11053-50","title":"ECU 14","description":"\u003cp\u003eThe Garmin ECU 14 is the electronic control unit for compatible Reactor hydraulic autopilot systems. It connects to and powers the course computer unit and the hydraulic pump, converting the autopilot heading commands into pump movement to steer the boat.\u003c\/p\u003e\u003cp\u003eThe ECU is fully gasketed and sealed to IPX7 and must be mounted close to the pump because the pump-to-ECU cables cannot be extended. It serves both as a core component of new installations and as a service or replacement part for existing Reactor hydraulic systems.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951121252692,"sku":"010-11053-50","price":640.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-bb348071.png?v=1781903915"},{"product_id":"garmin-ghp-reactor-40-autopilot-course-computer-ccu-010-11052-67","title":"Garmin GHP Reactor 40 Autopilot Course Computer CCU","description":"\u003cp\u003eThe Garmin GHP Reactor 40 Course Computer Unit (CCU) is the central sensor of the Reactor 40 autopilot. It contains a solid-state attitude and rate-of-turn sensor that provides the primary heading reference and communicates with the helm control and electronic control unit over the autopilot network.\u003c\/p\u003e\u003cp\u003eSealed to IPX7, the CCU must be mounted away from sources of magnetic interference and tested with a handheld compass during installation. It serves as a core component of new Reactor 40 systems and as a service or replacement part for existing installations.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951134228820,"sku":"010-11052-67","price":730.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-b7379a3b.jpg?v=1781903011"},{"product_id":"course-computer-unit-mounting-bracket-010-11173-00-010-11173-00","title":"Course Computer Unit Mounting Bracket","description":"\u003cp\u003eThis mounting bracket secures the course computer unit (CCU), one of the main components of the Garmin GHP 10 autopilot system, in its installed location. It holds the CCU firmly so the sensor stays correctly positioned for reliable autopilot performance.\u003c\/p\u003e\u003cp\u003eFix the bracket in a suitable location following the autopilot installation guidance, then mount the CCU to it. As a replacement bracket, it restores the original mounting for the GHP 10 course computer.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951169126740,"sku":"010-11173-00","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-b1266954.png?v=1781903909"},{"product_id":"steering-actuator-010-12826-00","title":"Steering Actuator","description":"\u003cp\u003eThis mechanical linear actuator provides the steering output for a Garmin kicker-motor autopilot system. It mounts through the tilt tube of the kicker motor and is driven by the autopilot to turn the motor, giving precise, hands-free steering control on a compatible installation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951197110612,"sku":"010-12826-00","price":899.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-fd82dab6.png?v=1781904059"},{"product_id":"solenoid-power-cable-010-11533-11","title":"Solenoid Power Cable","description":"\u003cp\u003eThis power cable integrates protection diodes and self-healing fuses to protect your ECU from the hazardous voltages generated by hydraulic solenoid coils when used in a solenoid configuration. It is for use with the Garmin GHP Reactor Mechanical\/Solenoid\/Retrofit corepack.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951206842708,"sku":"010-11533-11","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-18b9256e.png?v=1781904055"},{"product_id":"010-11202-03","title":"Seastar Fittings Kit","description":"\u003cp\u003eThis fittings kit supplies the adapters needed to plumb a Garmin hydraulic autopilot pump into most SeaStar steering systems. It makes connecting the autopilot to a compatible SeaStar hydraulic circuit straightforward during installation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951261565268,"sku":"010-11202-03","price":29.99,"currency_code":"GBP","in_stock":true}]},{"product_id":"ccu-ecu-interconnect-cable-010-11055-00","title":"CCU\/ECU Interconnect Cable","description":"\u003cp\u003eThis interconnect cable extends the bare-wire run between the ECU (electronic control unit) and CCU (course computer unit) when installing the Garmin GHP 10 autopilot. It gives extra routing flexibility for mounting the two units apart.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951267168596,"sku":"010-11055-00","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-671f5a41.png?v=1781903899"},{"product_id":"air-spool-and-flow-restrictor-kit-010-13065-00","title":"Air Spool and Flow Restrictor Kit","description":"\u003cp\u003eThis kit supplies both an air spool and a flow restrictor for use with a Garmin hydraulic autopilot. Only one of the two parts is fitted depending on the steering system and installation requirements, helping to tune the hydraulic circuit for correct autopilot performance.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951267332436,"sku":"010-13065-00","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c9c37042.png?v=1781903888"},{"product_id":"verado-adapter-kit-010-11202-02","title":"Verado Adapter Kit","description":"\u003cp\u003eIntegrating a hydraulic autopilot with a Mercury Verado steering system requires the right plumbing fittings to join the autopilot pump to the existing hydraulics, and this adapter kit provides them. It is designed to suit most Verado steering installations, giving you the adapters needed to make a clean hydraulic connection.\u003c\/p\u003e\u003cp\u003eUsing a kit matched to the Verado system avoids the guesswork of sourcing individual fittings and helps ensure a leak-free, correctly plumbed installation. Fit it as part of installing a Garmin hydraulic autopilot so the pump can drive the boat steering reliably.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951396536660,"sku":"010-11202-02","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-96af7a9a.png?v=1781904076"},{"product_id":"010-12827-00","title":"Throttle Actuator","description":"\u003cp\u003eThis throttle actuator adds electronic throttle control to a Garmin kicker-motor autopilot installation. It fits under the engine cover and connects to the existing throttle linkage, allowing the autopilot to manage engine speed for features such as automatic speed and heading control.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55951473606996,"sku":"010-12827-00","price":319.99,"currency_code":"GBP","in_stock":true}]},{"product_id":"garmin-ecu-10-for-reactor-40-010-11053-02","title":"Garmin ECU 10 for Reactor 40","description":"The Garmin ECU 10 is the electronic control unit at the heart of a Reactor 40 hydraulic autopilot system. It connects to and powers the course computer unit (CCU), the autopilot sensor that determines heading and rate of turn, and drives the hydraulic pump based on that data to steer the boat.\n\nThe ECU connects directly to the boat battery and accepts a wide 11.5 to 30 Vdc input protected by a 40 A blade-type fuse, suiting 12 and 24 V installations. Its fully-gasketed, high-impact aluminium-alloy housing is rated to IPX7 and can be mounted on a flat surface facing any direction, provided it is kept out of the bilge and within 0.5 m of the pump, as the pump-to-ECU cables cannot be extended. The ECU 10 is the hydraulic control unit used in Reactor 40 hydraulic corepacks.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952392749396,"sku":"010-11053-02","price":550.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-538f04b3.gif?v=1781903243"},{"product_id":"garmin-electronic-control-unit-for-ghp-compact-reactor-010-11053-01","title":"Garmin Control Unit for GHP Compact Reactor","description":"\u003cp\u003eThis electronic control unit (ECU) is the power and drive electronics for the Garmin GHP Compact Reactor hydraulic autopilot. It connects to and powers the course computer unit and the compact hydraulic pump, translating the autopilot heading commands into pump movement to steer the boat.\u003c\/p\u003e\u003cp\u003eThe ECU is fully gasketed and sealed to IPX7, and must be mounted close to the pump because the pump-to-ECU cables cannot be extended. It is intended as a service or replacement part for an existing GHP Compact Reactor installation and should be fitted by a qualified marine engineer.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952394518868,"sku":"010-11053-01","price":679.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c935c447.gif?v=1781903240"},{"product_id":"garmin-ghp-reactor-ccu-ecu-extension-cable-5m-010-11156-30","title":"Garmin GHP Reactor CCU - ECU Extension Cable 5m","description":"\u003cp\u003eThis 5 m (16 ft) extension cable lets you mount the CCU further than 3 m (9.8 ft) away from the ECU on a Garmin GHP Reactor autopilot. Longer 15 m and 25 m versions are also available.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952481714516,"sku":"010-11156-30","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-67d99927.jpg?v=1781902593"},{"product_id":"garmin-rudder-feedback-extension-cable-15m-010-11829-02","title":"Garmin Rudder Feedback Extension Cable 15m","description":"\u003cp\u003eAdd 15 m (49 ft) of length so a Garmin GRF 10 rudder feedback sensor can reach the GHP ECU. The extension cable suits installations where the sensor is mounted well away from the control unit.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952532832596,"sku":"010-11829-02","price":56.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-a3cfbd19.jpg?v=1781902589"},{"product_id":"garmin-ghp-reactor-ccu-ecu-extension-cable-15m-010-11156-31","title":"Garmin GHP Reactor CCU - ECU Extension Cable 15m","description":"\u003cp\u003eThis 15 m (49 ft) extension cable connects the GHP Reactor autopilot CCU (course computer unit) to its ECU. It allows the CCU to be mounted further than the standard 3 m (9.8 ft) from the ECU where the installation requires it.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952536371540,"sku":"010-11156-31","price":52.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-405bd6f9.jpg?v=1781902592"},{"product_id":"garmin-ghp-19x-hvs-update-rate-select-cable-010-11824-01","title":"Garmin GHP 19x HVS Update Rate Select Cable","description":"\u003cp\u003eThis cable limits the position output of the Garmin GHP 19x HVS antenna to once per second using a serial rate of 4,800 bps. Without it the antenna outputs position data ten times per second at 38,400 bps.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952536535380,"sku":"010-11824-01","price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-8479b6c0.gif?v=1781903245"},{"product_id":"garmin-actuator-power-cable-010-11533-00","title":"Garmin Actuator power cable","description":"\u003cp\u003eGarmin power cable for a compatible marine autopilot actuator, supplying power to the drive unit.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952545448276,"sku":"010-11533-00","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-1695e048.jpg?v=1781902592"},{"product_id":"garmin-interconnect-cable-for-ghp-reactor-steer-by-wire-autopilot-010-11351-50","title":"Garmin Interconnect Cable for GHP Reactor Steer by wire Autopilot","description":"\u003cp\u003eThis 3 m interconnect cable connects a Garmin GHP Reactor autopilot CCU (course computer unit) to a steer-by-wire controller. It also provides bare wire connections for the autopilot buzzer.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952560324948,"sku":"010-11351-50","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-5c30fced.jpg?v=1781902595"},{"product_id":"garmin-rudder-feedback-cable-010-11532-00","title":"Garmin Rudder feedback cable","description":"\u003cp\u003eGenuine Garmin rudder feedback cable used to connect a rudder feedback sensor in a Garmin marine autopilot system.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952578675028,"sku":"010-11532-00","price":13.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-7f1ea814.jpg?v=1781902592"},{"product_id":"garmin-grf-10-rudder-feedback-sensor-010-11829-00","title":"Garmin GRF 10 Rudder Feedback Sensor","description":"The Garmin GRF 10 is a rudder feedback sensor that tells a Garmin GHP or Reactor autopilot exactly where the rudder is. Although a Garmin autopilot can function without one, fitting a GRF 10 improves steering performance, adds a live rudder-angle indication on the helm display and helps extend the life of the drive pump by letting the autopilot work more efficiently.\n\nThe sensor mounts alongside the tiller arm with the rudder amidships, linked by a 300 mm threaded rod that can be shortened to suit the installation, and is rated for a 140 degree total range of travel. It connects to the orange 12-pin rudder feedback connector on the autopilot ECU using its 2 m cable, which can be extended up to 15 m with optional extension cables. The compact polyoxymethylene body is rated to IPX7 for reliable operation in the marine environment.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952579625300,"sku":"010-11829-00","price":229.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c843a408.jpg?v=1781902589"},{"product_id":"garmin-reactor-ccu-to-ecu-or-smartpump-interconnect-cable-010-11351-40","title":"Garmin Reactor CCU to ECU or SmartPump Interconnect Cable","description":"\u003cp\u003eUse this 5 m interconnect cable to connect a Garmin GHP Reactor autopilot CCU (course computer unit) to the ECU (electronic control unit). It includes bare-wire connections for an alarm and an optional Shadow Drive valve, and the ECU connector has a threaded collar for compatibility with ECU 12 and SmartPump systems.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952588570964,"sku":"010-11351-40","price":38.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-5c6f8dfd.jpg?v=1781902593"},{"product_id":"garmin-ecu-for-ghp-12-010-11053-30","title":"Garmin ECU for GHP 12","description":"\u003cp\u003eThis electronic control unit (ECU) is the power and drive electronics for the Garmin GHP 12 marine autopilot. It connects to and powers the course computer unit and the drive unit, converting the autopilot heading commands into movement of the drive to steer the boat.\u003c\/p\u003e\u003cp\u003eFully gasketed and sealed against water ingress, the ECU must be mounted close to the drive unit because the connecting cables cannot be extended. It is intended as a service or replacement part for an existing GHP 12 installation and should be fitted by a qualified marine engineer.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952589554004,"sku":"010-11053-30","price":859.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-c38afe1f.jpg?v=1781902592"},{"product_id":"garmin-ghp-reactor-ccu-ecu-extension-cable-25m-010-11156-32","title":"Garmin GHP Reactor CCU - ECU Extension Cable 25m","description":"\u003cp\u003eThis 25 m (82 ft) extension cable lets you mount the CCU further than 3 m (9.8 ft) away from the ECU on a Garmin GHP Reactor autopilot, ideal for larger vessels needing a long run.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952594207060,"sku":"010-11156-32","price":73.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-880fd41b.jpg?v=1781902593"},{"product_id":"garmin-autopilot-ecu-power-cable-010-11057-00","title":"Garmin Autopilot ECU Power Cable","description":"\u003cp\u003eProvide power to the electronic control unit (ECU) with this Garmin ECU power cable. It is wired to the boat battery, typically as one of the last connections made during a GHP 10 autopilot installation.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952597188948,"sku":"010-11057-00","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-74c354ec.jpg?v=1781902578"},{"product_id":"garmin-carry-case-for-the-ghc-handheld-remote-control-010-10117-02","title":"Garmin Carry case for the GHC Handheld Remote Control","description":"\u003cp\u003eNylon carrying case for the Garmin GHC handheld remote control and similar handheld units. The top-loading, zippered design protects the device from knocks and scratches, and an integrated belt loop keeps it within easy reach at the helm or on the move. A simple, hard-wearing way to store and carry your handheld remote.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952704012628,"sku":"010-10117-02","price":17.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-32d942de.jpg?v=1781902576"},{"product_id":"garmin-autopilot-remote-alarm-buzzer-010-11056-00","title":"Garmin Autopilot Remote Alarm Buzzer","description":"\u003cp\u003eThis Garmin remote alarm buzzer provides an audible alert for Garmin GHP and Reactor autopilot systems. Wired into the autopilot course computer, it sounds for autopilot alarms and warnings so the crew is notified even when away from the control head, an important safeguard when the autopilot is steering.\u003c\/p\u003e\u003cp\u003eThe buzzer can be mounted where it is easily heard at the helm and is the correct alarm accessory for compatible Garmin autopilot installations.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952752410964,"sku":"010-11056-00","price":79.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-39ad2b05.jpg?v=1781902580"},{"product_id":"garmin-neck-lanyard-for-the-ghc-handheld-remote-control-013-00052-00","title":"Garmin Neck lanyard for the GHC Handheld Remote Control","description":"\u003cp\u003eThis neck lanyard is a replacement carrying accessory for the Garmin GHC handheld remote control. It attaches to the remote so it can be worn around the neck, keeping the handheld secure and immediately to hand while you are on deck or at the helm. It is supplied as a spare or replacement part for the GHC handheld remote control.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952849305940,"sku":"013-00052-00","price":4.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-28f0ac6d.jpg?v=1781902579"},{"product_id":"garmin-ghp-20-ecu-ccu-extension-cable-5m-010-11156-00","title":"Garmin GHP 20 ECU-CCU Extension Cable 5m","description":"\u003cp\u003eThis 5 m extension cable connects the GHP 20 autopilot CCU (course computer unit) to its ECU, allowing the CCU to be mounted further from the ECU than the standard run when the installation calls for it.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952851599700,"sku":"010-11156-00","price":29.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3fdc8662.jpg?v=1781902583"},{"product_id":"garmin-rudder-feedback-extension-cable-5m-010-11829-01","title":"Garmin Rudder Feedback Extension Cable 5m","description":"\u003cp\u003eExtension cable that adds 5m (16ft) of reach so a Garmin GRF 10 rudder feedback sensor can reach the GHP autopilot ECU.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55952963961172,"sku":"010-11829-01","price":34.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-19790f05.jpg?v=1781902589"},{"product_id":"garmin-ghp-20-ecu-ccu-extension-cable-15m-010-11156-01","title":"Garmin GHP 20 ECU-CCU Extension Cable 15m","description":"\u003cp\u003eThis 15 m (49 ft) extension cable lets you mount the CCU further than 3 m (9.8 ft) away from the ECU on a Garmin GHP 20 autopilot, giving extra flexibility when siting the two units.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953007346004,"sku":"010-11156-01","price":47.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-9c91bf96.jpg?v=1781902582"},{"product_id":"garmin-autopilot-shadow-drive-010-11054-00","title":"Garmin Autopilot Shadow Drive","description":"The Garmin Autopilot Shadow Drive is a hydraulic sensor that brings intuitive, hands-on override to a Garmin Reactor or GHP hydraulic autopilot. Installed inline in the port or starboard steering line, it senses the pressure change when you manually turn the wheel and instantly suspends autopilot control so you can steer around hazards or traffic without pressing standby. When you release the helm and hold a steady course, the autopilot smoothly resumes a heading hold at the new heading.\n\nThe Shadow Drive valve wires into the autopilot CCU cable and must be mounted horizontally and level, secured with cable ties, at least 305 mm from magnetic materials, closer to the helm than to the pump. It is intended for power planing-hull or displacement-hull boats and is a standard part of many Garmin hydraulic autopilot corepacks.","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953303470420,"sku":"010-11054-00","price":419.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-082e5342.jpg?v=1781902579"},{"product_id":"garmin-ecu-power-cable-with-threaded-collar-010-11057-30","title":"Garmin ECU Power Cable with Threaded Collar","description":"\u003cp\u003eThis power cable supplies a Garmin autopilot ECU (electronic control unit). The threaded collar connector locks securely to the ECU for a reliable, water-resistant connection in the marine environment.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953321263444,"sku":"010-11057-30","price":85.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-fcfaae18.jpg?v=1781902593"},{"product_id":"garmin-belt-clip-button-for-the-ghc-handheld-remote-control-010-10380-00","title":"Garmin Belt clip \u0026 button for the GHC Handheld Remote Control","description":"\u003cp\u003eThis belt clip and button set is a replacement carrying accessory for the Garmin GHC handheld remote control. It attaches to the remote so it can be clipped to a belt, keeping the handheld within easy reach while you move around the boat. It is supplied as a spare or replacement part for the GHC handheld remote control.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953365762388,"sku":"010-10380-00","price":10.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-58115d0e.jpg?v=1781902575"},{"product_id":"garmin-ghp-20-ecu-ccu-extension-cable-25m-010-11156-02","title":"Garmin GHP 20 ECU-CCU Extension Cable 25m","description":"\u003cp\u003eThis 25 m (82 ft) extension cable connects the GHP 20 autopilot CCU (course computer unit) to its ECU. It allows the CCU to be mounted further than the standard 3 m (9.8 ft) from the ECU when the installation requires it.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55953421566292,"sku":"010-11156-02","price":64.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-081e5bd2.jpg?v=1781902582"},{"product_id":"5-protective-cover-s00-02040-00","title":"5” Protective Cover","description":"\u003cp\u003eThis plastic protective cover is shaped to fit the 5-inch Garmin GHC 50 autopilot control unit and TD 50 touchscreen display, fitting over the front of the unit when it is switched off. It shields the screen from salt spray, grit, sunlight and accidental knocks while the boat is moored or on passage.\u003c\/p\u003e\u003cp\u003eKeeping the cover in place between trips helps protect the display from the harsh marine environment and preserves its clarity over time.\u003c\/p\u003e","brand":"Garmin","offers":[{"title":"Default Title","offer_id":55975126335828,"sku":"S00-02040-00","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/legacy-3cc243af.png?v=1781903878"}],"url":"https:\/\/hme.sprechen.dev\/collections\/garmin-autopilot-spares.oembed?page=2","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}