Raymarine

Raymarine Evolution EV-200 Hydraulic Autopilot Pack with p70s (OEM Special)

£2,495.00
Tax included.
T70329
OEM special variant of the Evolution EV-200 hydraulic autopilot supplied with a p70s push-button control head in place of the standard p70Rs. Built on the EV-1 Sensor Core and ACU-200 for hydraulic steering systems.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The T70329 is an OEM special of the Evolution EV-200 hydraulic autopilot fitted with the p70s push-button control head rather than the rotary p70Rs, a combination requested by builders standardising on push-button helms. The electronics are the standard EV-200 set: the 9-axis EV-1 Sensor Core and the ACU-200 actuator control unit, which drives Type 1 hydraulic pumps for 80 to 230 cc steering cylinders at up to 15 A continuous.

As an OEM channel part the carton contents are not published in Raymarine's retail literature; in particular, confirm with us whether the Type 1 pump is included before ordering. Hydro-Balance tuning, calibration-free commissioning and pilot control from a compatible Axiom chartplotter all carry over from the standard EV-200 system.

PRODUCT DETAILS

  • OEM special: EV-200 hydraulic electronics with p70s push-button head
  • EV-1 Sensor Core and ACU-200 actuator control unit
  • Drives Type 1 hydraulic pumps for 80 to 230 cc cylinders
  • Hydro-Balance technology prevents steering oscillation
  • Carton contents to be confirmed for OEM channel stock
  • EV-1 Sensor Core (E70096)
  • ACU-200 actuator control unit (E70099)
  • p70s control head (E70328)
  • Evolution cabling kit (R70160)

No compatible transducers listed for this product.

No spares or accessories listed for this product.

System

Autopilot typeEvolution EV-200 Hydraulic Autopilot
Suitable steering systemHydraulic steering, 80 to 230 cc (4.9 to 14.0 cu in) ram capacity
Control headp70s control head (E70328)
Heading sensorEV-1 Sensor Core (E70096)
Actuator control unitACU-200 actuator control unit (E70099)
Drive unitNot included (choose a compatible drive for your steering system)
CablingEvolution cabling kit (R70160)
Controller alternativesCompatible Raymarine Axiom family chartplotter (LightHouse 4 v4.4.70 or later for Axiom 2 Pro / Axiom 2 XL)
Which Evolution pack suits my boat?
Match the pack to your steering system: EV-100 Wheel or Tiller for cockpit-drive sailboats, EV-100, EV-150 or EV-200 Power for hydraulic steering depending on cylinder capacity, EV-200 Sail for below-decks mechanical steering, EV-300 for solenoid-controlled systems, EV-400 for Type 2 and Type 3 drives on larger vessels, and EV-DBW for drive-by-wire steering.
Does an Evolution autopilot need calibration?
No. Set-up is automatic: the rudder gain, rudder damping, counter rudder and compass calibration routines required by earlier autopilots are no longer necessary, and the system keeps refining itself as you use the boat. This is documented in the EV-1 installation instructions (87472).
Do I need a rudder angle reference sensor?
Raymarine highly recommends the rudder angle reference transducer (M81105) on every Evolution system for optimum performance, and it is essential on ACU-300 solenoid installations. The EV-400 Sail and Power packs include a rotary rudder feedback unit, and the ACU-300 ships with one.
How do I check the displacement ratings?
Use the vessel's fully laden displacement, which Raymarine notes is often around 20 percent above the designed displacement, when comparing your boat against a drive or pack rating.
Can I control the autopilot from my chartplotter?
Yes. Compatible controllers include the Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL and Axiom 2 XL chartplotter families as well as the p70s and p70Rs pilot heads. Axiom 2 Pro and Axiom 2 XL need LightHouse 4 v4.4.70 or later; earlier families are supported per the compatibility tables in document 87472.