{"title":"Raymarine NMEA 2000","description":"\u003ch2\u003eRaymarine NMEA 2000\u003c\/h2\u003e\u003cp\u003eRaymarine builds award-winning marine electronics trusted by everyone from weekend cruisers to round-the-world racers. This is the Raymarine nmea 2000 range: plug-and-play backbone, drops and devices for a NMEA 2000 network.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/raymarine\"\u003eRaymarine range\u003c\/a\u003e or \u003ca href=\"\/collections\/nmea-2000\"\u003eNMEA 2000 from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"raymarine-devicenet-female-to-stng-male-adapter-90-degrees-a06084","title":"Raymarine SeaTalk ng Male to Devicenet Female Adapter 90 degrees","description":"\u003cp\u003eThis right-angle in-line adaptor presents a SeaTalkng male spur on one side and a threaded female DeviceNet connector on the other, turning the connection through 90 degrees. The elbow form is useful where space behind a device is tight. It allows SeaTalkng and NMEA 2000 (DeviceNet) cabling to be mixed without a full adaptor cable.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55951015641428,"sku":"A06084","price":25.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-devicenet-male-to-stng-female-adapter-a06083","title":"Raymarine SeaTalk ng Female to Devicenet Male Adapter","description":"\u003cp\u003eThis compact in-line adaptor presents a SeaTalkng female spur on one side and a threaded male DeviceNet connector on the other. It lets you switch between SeaTalkng and NMEA 2000 (DeviceNet) cabling at the back of a device or the end of a cable, simplifying mixed installations.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55951059386708,"sku":"A06083","price":25.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a06079","title":"DeviceNet Female to SeaTalkNG Adaptor Cable, 120mm","description":"\u003cp\u003eThe Raymarine A06079 is a 120mm adaptor cable that bridges the NMEA 2000 DeviceNet Female connector standard to the Raymarine SeaTalkNG backbone. It allows any DeviceNet-terminated NMEA 2000 device to be plugged directly into a SeaTalkNG network spur or backbone, without requiring an additional adaptor. The short 120mm length keeps connections neat and minimises cable clutter at the network junction.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55951312978260,"sku":"A06079","price":40.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a06080","title":"SeaTalkNG Elbow Spur to DeviceNet Socket, 1m","description":"\u003cp\u003eThe Raymarine A06080 is a 1-metre SeaTalkNG spur cable with a right-angle (elbow) SeaTalkNG connector at the network end and a DeviceNet female socket at the device end. The elbow profile is ideal for installations where a straight connector would be difficult to route, allowing cables to exit at 90 degrees from the backbone or T-piece while still connecting NMEA 2000 DeviceNet devices.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55951545172308,"sku":"A06080","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-seatalk-ng-to-seatalk-1-converter-kit-e22158","title":"Raymarine SeaTalk ng to SeaTalk 1 Converter Kit","description":"\u003cp\u003eThe Raymarine SeaTalk 1 to SeaTalk NG Adaptor Kit lets older SeaTalk 1 products communicate with newer SeaTalk NG devices. Older autopilot systems, instruments, GPS receivers, Smart Controllers and LifeTag systems can be integrated into a modern SeaTalk NG network, protecting your investment in existing equipment when upgrading a display or autopilot.\u003c\/p\u003e\u003cp\u003eAt its heart is the SeaTalk to SeaTalk NG converter, which bridges the legacy 3-wire SeaTalk 1 bus to the SeaTalk NG backbone. Each converter allows connection of one SeaTalk 1 device and up to two SeaTalk NG devices. This kit version is supplied complete with the converter, two SeaTalk NG backbone terminators, two blanking plugs, a 400 mm SeaTalk to SeaTalk NG converter cable, a 1 m SeaTalk NG power cable and a 1 m SeaTalk NG spur cable, giving everything needed to establish basic SeaTalk NG connectivity.\u003c\/p\u003e\u003cp\u003eSeaTalk NG is Raymarine's implementation of the NMEA 2000 standard. Cables and connectors are colour coded for easy identification, and the converter is rated IPx6 for installation below decks or in protected locations.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55951548514644,"sku":"E22158","price":130.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-dt800-smart-plastic-depth-temperature-transducer-0-degree-tilted-element-a22165","title":"Raymarine DT800 Smart Plastic Depth, Temperature Transducer 0 degree Tilted Element","description":"\u003cp\u003eThe Raymarine DT800 is a smart depth and water-temperature transducer for Raymarine instrument and chartplotter systems. Its SeaTalkng output plugs directly into your network so accurate depth and temperature data appear on every connected device, with calibration handled from a networked Axiom display or i70s instrument.\u003c\/p\u003e\u003cp\u003eThis version uses a 0 degree internal element designed for flat (horizontal) mounting positions on shallow-deadrise hulls. The DT800 operates at 235 kHz to avoid interference with other onboard sounders and delivers 100 Watts of power for accurate readings from 0.5 m (1.6 ft) to 180 m (600 ft). The 2-inch plastic housing suits fibreglass or metal hulls, the retractable insert with water valve simplifies servicing, and a 6 m (20 ft) cable terminates in a SeaTalkng connector.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952064479572,"sku":"A22165","price":375.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-c-to-devicenet-cable-1-5m-a06027","title":"C-Series to DeviceNet Adaptor Cable, 1.5m","description":"\u003cp\u003eThe Raymarine A06027 is a 1.5-metre adaptor cable designed to connect Raymarine C80 and C120 Classic Multifunction Displays to an NMEA 2000 DeviceNet-standard network. It enables these legacy C-Series displays to participate in an NMEA 2000 data network and share instrument data with compatible devices throughout the vessel.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952238281044,"sku":"A06027","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-seatalk-2-nmea2000-cable-1-5m-e55053","title":"Raymarine Seatalk 2\/Nmea2000 Cable 1.5m","description":"\u003cp\u003eThe Raymarine SeaTalk 2 \/ NMEA 2000 Interface Cable links a Raymarine E-Series display into a SeaTalk 2 or NMEA 2000 network. SeaTalk 2 shares the NMEA 2000 physical layer, so the cable lets the display exchange data with compatible Raymarine SeaTalk 2 equipment and third party NMEA 2000 devices.\u003c\/p\u003e\u003cp\u003eThis 1.5 m cable has a twist-lock connector at the E-Series display end and a standard 5-pin waterproof SeaTalk 2 \/ NMEA 2000 style connector at the other end.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952245096788,"sku":"E55053","price":65.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-e-to-devicenet-cable-1-5m-a06026","title":"E-Series to DeviceNet Adaptor Cable, 1.5m","description":"\u003cp\u003eThe Raymarine A06026 is a 1.5-metre adaptor cable designed to connect Raymarine E80 and E120 Classic Multifunction Displays to an NMEA 2000 DeviceNet-standard network. It allows these legacy E-Series displays to participate in an NMEA 2000 data network, sharing instrument data with compatible devices. Length of 1.5m provides enough reach for most helm installations.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952255582548,"sku":"A06026","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-rs130-and-seatalk-1-to-seatalk-ng-converter-retro-pack-t70133","title":"Raymarine RS130 and SeaTalk 1 to SeaTalk ng Converter Retro Pack","description":"\u003cp\u003eThe Raymarine RS130 and SeaTalk 1 to SeaTalk NG Converter Retro Pack combines two items used when modernising an older installation: the RS130 GNSS GPS sensor and a SeaTalk 1 to SeaTalk NG converter.\u003c\/p\u003e\u003cp\u003eThe RS130 provides a high sensitivity, multi-constellation GNSS position source with SeaTalk NG \/ NMEA 2000 connectivity. The SeaTalk 1 to SeaTalk NG converter lets selected legacy SeaTalk 1 devices, such as instruments and autopilots, continue to communicate on the new SeaTalk NG network. Together they make it straightforward to add a modern GPS feed and a SeaTalk NG backbone while retaining compatible older equipment.\u003c\/p\u003e\u003cp\u003eSeaTalk NG is Raymarine's implementation of the NMEA 2000 standard, and the converter is rated IPx6 for installation below decks.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952257712468,"sku":"T70133","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-yamaha-command-link-plus-cable-1m-e70242","title":"Raymarine Yamaha Command Link Plus Cable 1 m","description":"\u003cp\u003eThe Raymarine E70242 is a 1 m Yamaha Command Link Plus cable used to interface a Yamaha engine network with a compatible Raymarine system. It connects into the Yamaha Command Link Plus engine network so Yamaha engine data can be brought onto the boat network and displayed on a compatible Raymarine multifunction display.\u003c\/p\u003e\u003cp\u003eAt 1 m it suits a short run between the engine network connection point and the Raymarine interface. This is an engine-interface cable; connector detail beyond the Command Link Plus interface is not stated in the reachable literature. Confirm the full engine integration wiring against the Yamaha and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952263741780,"sku":"E70242","price":95.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-dst800-smart-plastic-depth-speed-temperature-through-hull-transducer-a22111","title":"Raymarine DST800 Smart Plastic Depth, Speed, Temperature Through Hull Transducer","description":"\u003cp\u003eThe Raymarine DST800 Smart transducer brings depth, speed-through-water and water temperature together in a single 2-inch (51 mm) through-hull fitting. Its digital SeaTalkng \/ NMEA 2000 output plugs directly into your network so the readings appear on connected Axiom chartplotters and i70s instruments, with calibration handled from the display itself.\u003c\/p\u003e\u003cp\u003eThe DST800 operates at 235 kHz, deliberately offset from the usual 50\/200 kHz fishfinder band so the depth sounder will not interfere with a separate fishing transducer. The high-strength plastic housing suits fibreglass or metal hulls, and the retractable design with its water-stop valve lets you withdraw the insert for cleaning or paddlewheel maintenance without flooding the bilge.\u003c\/p\u003e\u003cp\u003eThis is the smart, network-ready depth, speed and temperature sensor for boats running a Raymarine SeaTalkng instrument and chartplotter system.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952265544020,"sku":"A22111","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-dt800-smart-bronze-depth-temperature-transducer-12-degree-tilted-element-a22147","title":"Raymarine DT800 Smart Bronze Depth, Temperature Transducer 12 degree Tilted Element","description":"\u003cp\u003eThe Raymarine DT800 is a smart depth and water-temperature transducer for Raymarine instrument and chartplotter systems. Its SeaTalkng output plugs straight into your network so the readings appear on every connected device, with calibration carried out from a networked Axiom display or i70s instrument.\u003c\/p\u003e\u003cp\u003eThis variant uses a bronze housing, the right choice for fibreglass or wood hulls, and carries a 12 degree tilted element to compensate for hull deadrise on V-bottom boats. The DT800 operates at 235 kHz to avoid interference with other onboard sounders and provides 100 Watts of power for accurate depths from 0.5 m (1.6 ft) to 180 m (600 ft). The retractable insert with water valve makes maintenance simple, and the 6 m (20 ft) cable terminates in a SeaTalkng connector.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952266821972,"sku":"A22147","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-caterpillar-loom-cable-12-way-e70305","title":"Raymarine Caterpillar Engine Loom Cable, 12-Way","description":"\u003cp\u003eThe Raymarine E70305 is a 12-way Caterpillar engine loom cable used to interface a Caterpillar engine system with a compatible Raymarine system. The 12-way loom connects into the Caterpillar engine interface so engine data can be brought onto the boat network and displayed on a compatible Raymarine multifunction display.\u003c\/p\u003e\u003cp\u003eIt forms part of a Caterpillar engine integration. Cable length is not stated in the reachable literature and has been omitted; the 12-way figure refers to the loom connector. Confirm the complete engine integration wiring and engine-side connections against the Caterpillar and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952310829396,"sku":"E70305","price":95.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-rmk-6-n2k-keypad-e70443","title":"Raymarine RMK-6 N2K Keypad","description":"\u003cp\u003eThe RMK-6 is a compact six-button keypad designed for use with Raymarine LightHouse digital switching systems over NMEA 2000. It provides a dedicated panel for controlling on-board switching functions such as lighting, pumps and other electrical circuits from a convenient remote location.\u003c\/p\u003e\u003cp\u003eThe keypad ships with 20 pre-printed legend inserts covering the most common switching functions, plus a blank sheet that can be cut and labelled to suit custom installations. The waterproof front panel suits flush or surface mounting at any helm position.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952319709524,"sku":"E70443","price":425.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"stng-bb-f-to-dnet-bb-f-adapter-400mm-a80675","title":"SeaTalkNG Backbone Female to DeviceNet Backbone Female Adaptor, 400mm","description":"\u003cp\u003eThe Raymarine A80675 is a 400mm adaptor cable for connecting backbone segments between SeaTalkNG and NMEA 2000 DeviceNet networks. It features a SeaTalkNG Backbone female (BB-F) connector at one end and a DeviceNet Backbone female (BB-F) connector at the other, providing a flexible bridge for mixed-backbone NMEA 2000 installations.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952320495956,"sku":"A80675","price":40.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"stng-bb-f-to-dnet-bb-m-adapter-400mm-a80674","title":"SeaTalkNG Backbone Female to DeviceNet Backbone Male Adaptor, 400mm","description":"\u003cp\u003eThe Raymarine A80674 is a 400mm adaptor cable for connecting backbone-style SeaTalkNG and NMEA 2000 DeviceNet network segments. It provides a SeaTalkNG Backbone female (BB-F) connector at one end and a DeviceNet Backbone male (BB-M) connector at the other. This allows a SeaTalkNG backbone to be extended or bridged with a DeviceNet backbone segment in an NMEA 2000 network installation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952324165972,"sku":"A80674","price":40.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-dst800-smart-bronze-depth-speed-temperature-through-hull-transducer-a22146","title":"Raymarine DST800 Smart Bronze Depth, Speed, Temperature Through Hull Transducer","description":"\u003cp\u003eThe Raymarine DST800 Smart transducer combines depth, speed-through-water and water temperature in a single 2-inch (51 mm) bronze through-hull fitting. Its digital SeaTalkng \/ NMEA 2000 output connects straight into your network so the data appears on connected Axiom chartplotters and i70s instruments, with calibration carried out from the display.\u003c\/p\u003e\u003cp\u003eRunning at 235 kHz, the DST800 is deliberately offset from the usual 50\/200 kHz fishfinder band so it will not interfere with a separate fishing transducer. The bronze housing is the right choice for fibreglass or wood hulls, and the retractable insert with its water-stop valve allows cleaning and paddlewheel servicing without flooding the bilge.\u003c\/p\u003e\u003cp\u003eIt is the network-ready smart depth, speed and temperature sensor for a Raymarine SeaTalkng instrument and chartplotter system fitted to a timber or glass boat.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952329867604,"sku":"A22146","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-dt800-smart-plastic-depth-temperature-transducer-12-degree-tilted-element-a22112","title":"Raymarine DT800 Smart Plastic Depth, Temperature Transducer 12 degree Tilted Element","description":"\u003cp\u003eThe Raymarine DT800 is a smart depth and water-temperature transducer for Raymarine instrument and chartplotter systems. Its convenient SeaTalkng output plugs directly into your network so accurate depth and temperature data appear on every connected device, with calibration handled from a networked Axiom display or i70s instrument.\u003c\/p\u003e\u003cp\u003eThis version carries a 12 degree tilted internal element to compensate for hull deadrise on V-bottom boats, keeping the sonar beam pointing straight down for the strongest returns. The DT800 operates at 235 kHz to avoid interference with other onboard sounders and delivers 100 Watts of power for accurate readings from 0.5 m (1.6 ft) to 180 m (600 ft). The 2-inch plastic housing suits fibreglass or metal hulls, the retractable insert with water valve simplifies maintenance, and a 6 m (20 ft) cable terminates in a SeaTalkng connector.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952447045972,"sku":"A22112","price":375.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-nmea-2000-j1939-bridge-engine-transmission-genset-gateway-a80052","title":"Raymarine NMEA 2000 \/ J1939 Bridge (Engine \/ Transmission \/ Genset Gateway)","description":"\u003cp\u003eThe Raymarine A80052 is a protocol bridge that connects a SAE J1939 engine, transmission or generator data bus to a NMEA 2000 \/ Raymarine SeaTalkng network. Many marine diesel engines, transmissions and gensets output their data over J1939; this gateway translates that data into NMEA 2000 messages so it can be shown on a compatible Raymarine multifunction display as engine and tank instrumentation.\u003c\/p\u003e\u003cp\u003eIt is used where an engine system uses the J1939 standard rather than native NMEA 2000 output, providing a single bridge between the two networks. Detailed electrical and physical specifications are not published in the reachable Raymarine literature and have been omitted rather than estimated; confirm against the engine manufacturer's interfacing guide and the Raymarine engine interfacing documentation before installation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952458350932,"sku":"A80052","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-micro-c-devicenet-adaptor-cable-male-e05027","title":"Micro-C DeviceNet Adaptor Cable, Male","description":"\u003cp\u003eThe Raymarine E05027 is a Micro-C to DeviceNet Male adaptor cable. It bridges the compact Micro-C NMEA 2000 connector format, common on smaller instruments and sensors, to the standard DeviceNet male plug used in NMEA 2000 networks. This allows Micro-C-terminated devices to plug into DeviceNet-standard network sockets and vice versa.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952514253140,"sku":"E05027","price":110.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-yamaha-command-link-product-to-nmea-2000-network-adapter-cable-a80055","title":"Raymarine Yamaha Command Link to NMEA 2000 Network Adaptor Cable","description":"\u003cp\u003eThe Raymarine A80055 is an engine-interface adaptor cable that links a Yamaha Command Link engine network to a NMEA 2000 \/ Raymarine SeaTalkng backbone. It adapts the Yamaha Command Link connector to a NMEA 2000 (DeviceNet) connection so Yamaha engine data can be passed onto the boat network and displayed on a compatible Raymarine multifunction display.\u003c\/p\u003e\u003cp\u003eIt is used as part of a Yamaha engine integration where the engine data is carried on Yamaha Command Link. This is an interface adaptor cable; exact length is not stated in the reachable literature and has been omitted. Confirm Command Link bus termination and power requirements against the Yamaha and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952523002196,"sku":"A80055","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-yamaha-nmea-2000-3-9m-pigtail-bus-wire-a80060","title":"Raymarine Yamaha NMEA 2000 Pigtail Bus Wire 3.9 m","description":"\u003cp\u003eThe Raymarine A80060 is a 3.9 m Yamaha NMEA 2000 pigtail bus wire used when integrating a Yamaha engine network with a NMEA 2000 \/ Raymarine SeaTalkng backbone. The pigtail bus wire forms part of the engine-side network wiring so Yamaha engine data can be carried onto the boat network and displayed on a compatible Raymarine multifunction display.\u003c\/p\u003e\u003cp\u003eAt 3.9 m it provides a generous run between the engine network and the NMEA 2000 backbone connection point. This is an engine-interface bus cable used alongside the Yamaha Command Link to NMEA 2000 adaptor; confirm network termination and power feed against the Yamaha and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952529621332,"sku":"A80060","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-volvo-engine-evc-link-cable-1m-e70240","title":"Raymarine Volvo Penta EVC Engine Link Cable 1 m","description":"\u003cp\u003eThe Raymarine E70240 is a 1 m Volvo Penta EVC engine link cable used to connect a Volvo Penta Electronic Vessel Control (EVC) engine system to a compatible Raymarine system. It links into the Volvo EVC engine network so Volvo engine data can be carried onto the boat network and displayed on a compatible Raymarine multifunction display.\u003c\/p\u003e\u003cp\u003eAt 1 m it suits a short run between the Volvo EVC interface point and the Raymarine connection. This is an engine-interface cable forming part of a Volvo EVC integration, often used together with the Volvo Y-loom cable. Confirm the complete engine integration wiring against the Volvo Penta and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952544268628,"sku":"E70240","price":95.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-eci-100-engine-and-control-interface-e70227","title":"Raymarine ECI-100 Engine and Control Interface","description":"\u003cp\u003eThe Raymarine ECI-100 Engine and Control Interface is a gateway that integrates engine and vessel control data into a Raymarine SeaTalkng (NMEA 2000) network. It reads data from supported engines and control systems, including those using J1939, analogue senders or proprietary interfaces, and converts it so engine parameters such as RPM, temperature, oil pressure, fuel and hours can be shown on compatible Raymarine multifunction displays and instruments. By bridging engines that do not natively output NMEA 2000, the ECI-100 allows a single Raymarine display to present navigation and engine information together. It is installed inline on the network and configured for the specific engine type during commissioning.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952544498004,"sku":"E70227","price":375.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-axiom-power-cable-1-5m-straight-with-nmea-2000-connector-r70523","title":"Raymarine Axiom Power Cable 1.5m Straight with NMEA 2000 Connector","description":"\u003cp\u003eThe Raymarine R70523 is a 1.5 m straight power and NMEA 2000 cable for Axiom 7, 9 and 12 multifunction displays. It connects to the power\/data port on the display and provides a direct NMEA 2000 network connection alongside the primary DC power feed, simplifying wiring at the helm by combining power and network in a single lead.\u003c\/p\u003e\u003cp\u003eThe cable terminates at the display end with the Axiom multi-way connector, and at the supply end with bare, tinned power wires and an NMEA 2000 connector. A right-angled version is available as R70561 for installations where a lower-profile connector exit is required.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952550658388,"sku":"R70523","price":50.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-micro-c-devicenet-adaptor-cable-female-e05026","title":"Micro-C DeviceNet Adaptor Cable, Female","description":"\u003cp\u003eThe Raymarine E05026 is a Micro-C to DeviceNet Female adaptor cable that allows devices with Micro-C NMEA 2000 connectors to be used within a DeviceNet-standard NMEA 2000 network. The Micro-C connector is the compact NMEA 2000 connector format commonly found on smaller instruments, and this adaptor bridges it to the standard DeviceNet female socket used widely in marine electronics.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952553443668,"sku":"E05026","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-seatalk-ng-spur-to-devicenet-male-adaptor-cable-400mm-a06046","title":"Raymarine SeaTalk ng Spur to Devicenet Male Adaptor Cable 1.5m","description":"\u003cp\u003eThis 1.5 m (59\") adaptor cable adapts a Raymarine SeaTalkng instrument or display to work on an NMEA 2000 DeviceNet network. Plug the white SeaTalkng spur connector into the socket on your Raymarine device; the metal, threaded male DeviceNet connector is then ready to accept a standard NMEA 2000 drop cable into an NMEA 2000 backbone.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952554688852,"sku":"A06046","price":40.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-volvo-engine-y-loom-cable-e70241","title":"Raymarine Volvo Penta EVC Engine Y-Loom Cable","description":"\u003cp\u003eThe Raymarine E70241 is a Volvo Penta EVC engine Y-loom cable used when integrating a Volvo Penta Electronic Vessel Control (EVC) engine system with a compatible Raymarine system. The Y-loom provides a split (Y) connection in the engine-interface wiring so the Volvo EVC engine network can be connected through to the Raymarine system.\u003c\/p\u003e\u003cp\u003eIt is used together with the Volvo EVC engine link cable as part of a complete Volvo engine integration. Cable length is not stated in the reachable literature and has been omitted. Confirm the full engine integration wiring against the Volvo Penta and Raymarine engine interfacing documentation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952555376980,"sku":"E70241","price":95.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-p79s-smart-depth-in-hull-depth-transducer-with-fitting-kit-nmea2000-a80373","title":"Raymarine P79S Smart Depth In Hull Depth Transducer with Fitting Kit, NMEA2000","description":"\u003cp\u003eThe Raymarine P79S is a smart, NMEA 2000 in-hull depth transducer that reads through a solid fibreglass hull with no protrusion whatsoever, making it ideal for trailered boats and owners who want to minimise drag. It comes with the P79 fitting kit: an adjustable flange that bonds to the inside of the hull with quick-setting marine epoxy, is dialled in to match the boat's deadrise angle, then filled with non-toxic antifreeze before the active transducer cap is locked in place for a straight-down beam.\u003c\/p\u003e\u003cp\u003eThe P79S provides digital depth data over a DeviceNet NMEA 2000 connector, plugging directly into your network for display on connected instruments and chartplotters. It operates at 235 kHz, offset from the 50\/200 kHz fishfinder band to avoid interference, and accommodates deadrise angles from 2 to 22 degrees. As an in-hull design it has no water-temperature sensor and is intended for solid fibreglass hulls up to 5\/8 inch thick (or aluminium under 3.8 mm).\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952557769044,"sku":"A80373","price":395.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a06075-raymarine-stng-to-devicenet-female-adaptor-cable","title":"SeaTalkNG to DeviceNet Female Adaptor Cable, 1m","description":"\u003cp\u003eThe Raymarine A06075 is a 1-metre adaptor cable that allows NMEA 2000 DeviceNet female-terminated instruments and sensors to be connected to a Raymarine SeaTalkNG backbone. One end fits the SeaTalkNG spur socket and the other terminates in the standard NMEA 2000 DeviceNet female connector, providing a straightforward plug-and-play installation.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952558588244,"sku":"A06075","price":50.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-nmea-2000-micro-bulkhead-feed-through-a80054","title":"Raymarine NMEA 2000 Micro Bulkhead Feed Through","description":"\u003cp\u003eThe Raymarine A80054 is a NMEA 2000 Micro bulkhead feed-through, used to route a NMEA 2000 \/ DeviceNet cable through a panel, console or bulkhead while keeping a sealed, serviceable connection on each side. It presents a NMEA 2000 Micro (5-pin) male and female interface so a standard DeviceNet drop or backbone cable can be plugged in on either face of the bulkhead.\u003c\/p\u003e\u003cp\u003eFeed-throughs like this are used to take a network cable from inside a console out to a mast, arch or open deck without cutting the cable or compromising the weatherproofing of the panel. This is a passive connector with no electronics. Cable lengths are not applicable.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952562323796,"sku":"A80054","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-devicenet-male-adaptor-cable-a06078","title":"DeviceNet Male Adaptor Cable, 140mm","description":"\u003cp\u003eThe Raymarine A06078 is a 140mm adaptor cable with a DeviceNet male (plug) connector at one end, allowing NMEA 2000 DeviceNet-terminated devices to connect directly into a Raymarine SeaTalkNG backbone or spur. The compact 140mm length keeps the connection tidy at the network junction point.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952598008148,"sku":"A06078","price":20.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-punch-rmx-5-media-receiver-e70396","title":"Raymarine Punch RMX-5 Media Receiver","description":"\u003cp\u003eThe Punch RMX-5 is a full-featured marine digital media receiver with AM\/FM\/WB tuner, 2.7 inch full colour TFT display and built-in CAN bus interface for connection to NMEA 2000 network systems. Dual-zone, dual-source audio control allows independent audio management for two areas of the vessel simultaneously, each with its own 7-band graphic equaliser, Punch EQ and selectable crossover settings. The 4x50 W internal amplifier drives speakers in each zone directly, while four-channel RCA outputs at 4 V allow expansion via external amplifiers. SiriusXM satellite radio connectivity is available with the addition of the optional SXV300 tuner. Bluetooth A2DP streaming supports Apple and Android devices with album art display.\u003c\/p\u003e\u003cp\u003eThe IPX6 rated front panel, stainless steel rear chassis and conformal coated circuit board deliver long service life in salt air and spray environments. Element Ready construction is validated to ASTM B117 and D4329 standards.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Brand is Rockford Fosgate (Punch Marine). Antenna and SiriusXM tuner not included.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952600564052,"sku":"E70396","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-stng-bulk-hd-mounting-cable-r08311","title":"SeaTalkNG Bulkhead Mounting Cable","description":"\u003cp\u003eThe Raymarine R08311 is a SeaTalkNG bulkhead mounting cable used to pass a SeaTalkNG network connection through a panel or bulkhead. It provides a clean, secure feed-through point for SeaTalkNG cabling between compartments, helping to maintain the integrity and weather-sealing of the installation. Compatible with all SeaTalkNG and NMEA 2000 networks.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952702734676,"sku":"R08311","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-seatalk-ng-to-seatalk-1-converter-r52131","title":"Raymarine SeaTalk ng to SeaTalk 1 Converter","description":"\u003cp\u003eThe Raymarine SeaTalk 1 to SeaTalk NG Converter bridges the legacy 3-wire SeaTalk 1 bus to a modern SeaTalk NG backbone, letting older SeaTalk 1 instruments, autopilots, GPS receivers and accessories communicate on a SeaTalk NG (NMEA 2000) network.\u003c\/p\u003e\u003cp\u003eThis is the converter only, with no cables supplied. It suits installations where the SeaTalk NG backbone, spur and power cabling is already in place, or where you wish to specify the cable lengths yourself. Where a complete solution is needed, the E22158 adaptor kit includes the same converter together with cables, terminators and blanking plugs.\u003c\/p\u003e\u003cp\u003eEach converter allows connection of one SeaTalk 1 device and up to two SeaTalk NG devices. It is rated IPx6 and operates from 9 to 16 V DC.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952703783252,"sku":"R52131","price":110.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-stng-to-devicenet-male-adaptor-cable-1m-a06076","title":"SeaTalkNG to DeviceNet Male Adaptor Cable, 1m","description":"\u003cp\u003eThe Raymarine A06076 is a 1-metre adaptor cable that allows NMEA 2000 DeviceNet male-terminated instruments and sensors to be connected to a Raymarine SeaTalkNG backbone. One end fits the SeaTalkNG spur socket and the other terminates in the standard NMEA 2000 DeviceNet male plug, making integration with third-party NMEA 2000 equipment simple and tool-free.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952848060756,"sku":"A06076","price":50.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-punch-rmx-8bb-media-receiver-e70395","title":"Raymarine Punch RMX-8BB Media Receiver","description":"\u003cp\u003eThe Punch RMX-8BB is a high-performance hide-away marine digital media receiver designed for vessels requiring independent audio control across multiple areas. The black box format mounts out of sight while the system is controlled via a compatible wired display head or up to three wired remotes at a total cable run of 100 ft. Four independent audio zones each feature their own source selection, dedicated 7-band graphic equaliser, Punch EQ and selectable crossover slopes. Six-channel RCA outputs at 4 V serve four zones, enabling a powerful multi-amplifier installation.\u003c\/p\u003e\u003cp\u003eAn AM\/FM\/WB tuner with global frequency support, SiriusXM satellite radio readiness and Bluetooth A2DP streaming provide broad media source coverage. CAN bus connectivity allows integration with NMEA 2000 systems via the optional PMX-CAN adaptor for control from compatible MFDs. The IPX5 rated chassis and conformal coated circuit board withstand marine humidity and spray.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Brand is Rockford Fosgate (Punch Marine). Antenna, display head and SiriusXM tuner sold separately.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55952964485460,"sku":"E70395","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-seatalk-ng-spur-to-devicenet-female-adaptor-cable-400mm-a06045","title":"Raymarine SeaTalk ng Spur to Devicenet Female Adaptor Cable 400mm","description":"\u003cp\u003eThis 400 mm (15.7\") adaptor cable connects an NMEA 2000-compatible device to Raymarine's SeaTalkng backbone. The metal, threaded female DeviceNet connector attaches to the NMEA 2000 connection, while the white spur connector plugs into a SeaTalkng spur port.\u003c\/p\u003e\u003cp\u003eIt is the easy way to bring a non-Raymarine NMEA 2000 sensor onto a SeaTalkng network.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55953303241044,"sku":"A06045","price":45.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-axiom-power-cable-1-5m-right-angled-with-nmea-2000-connector-r70561","title":"Raymarine Axiom Power Cable 1.5m Right-Angled with NMEA 2000 Connector","description":"\u003cp\u003eThe Raymarine R70561 is a 1.5 m right-angled power and NMEA 2000 cable for Axiom 7, 9 and 12 multifunction displays. The right-angled display connector provides a low-profile exit, making it suitable for flush-mounted or space-constrained helm installations. It combines the DC power feed and NMEA 2000 network connection in a single cable from the display port.\u003c\/p\u003e\u003cp\u003eThe cable terminates at the display end with the right-angled Axiom multi-way connector and at the supply end with bare, tinned power wires and an NMEA 2000 connector. For a straight connector, use R70523.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55953417503060,"sku":"R70561","price":50.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-nmea2000-devicenet-male-to-devicenet-female-cable-2m-e70260","title":"NMEA 2000 DeviceNet Drop Cable, Male to Female, 2m","description":"\u003cp\u003eThe Raymarine E70260 is a 2-metre NMEA 2000 drop cable with a DeviceNet male connector at one end and a DeviceNet female connector at the other. It can be used as a spur cable to extend an NMEA 2000 DeviceNet network, allowing devices to be positioned further from the backbone T-piece. Compatible with any standard NMEA 2000 network using the DeviceNet connector format.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55953445224788,"sku":"E70260","price":95.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"raymarine-stng-male-to-devicenet-female-adapter-a06082","title":"Raymarine SeaTalk ng Male to Devicenet Female Adapter","description":"\u003cp\u003eThis compact in-line adaptor switches between SeaTalkng and NMEA 2000 (DeviceNet) cabling right at the back of a device or at the end of a cable. It presents a SeaTalkng male spur on one side and a threaded female DeviceNet connector on the other, making it easy to mix Raymarine and non-Raymarine components without a full adaptor cable.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55953445552468,"sku":"A06082","price":25.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a80719","title":"Volvo Penta Gateway, 1-6 Engines MK3","description":"\u003cp\u003eThe Raymarine Volvo Penta Gateway MK3 (A80719) enables integration between Volvo Penta engine systems and Raymarine multifunction displays via NMEA 2000. Supporting up to 6 engines, the gateway translates Volvo Penta engine data (RPM, fuel consumption, engine hours, temperatures, and fault codes) into a format readable by Raymarine MFDs, providing comprehensive engine monitoring at the helm. The MK3 version represents the third generation of this gateway, offering improved compatibility and reliability with current Volvo Penta IPS and inboard drive systems. Compatible with Axiom, Axiom+, and other current Raymarine MFD platforms.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975505068372,"sku":"A80719","price":1495.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"a80721","title":"Actisense NGW-1 NMEA 0183 to NMEA 2000 Converter Gateway","description":"\u003cp\u003eThe Actisense NGW-1 is an intelligent bi-directional gateway that converts NMEA 0183 data into NMEA 2000 and vice versa, allowing instruments built to the two standards to share information on the same boat. It lets you add a modern NMEA 2000 or Raymarine SeaTalkng backbone while keeping existing NMEA 0183 devices, spreading the cost of upgrading.\u003c\/p\u003e\u003cp\u003eThe standard ISO variant connects to NMEA 0183 devices through a dedicated transmit and receive pair, with opto-isolated input and Actisense ISO-Drive output to protect connected equipment from ground loops. Power is taken directly from the NMEA 2000 network, so no separate supply is needed, and multiple NGW-1 units can be used to multiplex several NMEA 0183 signals onto the network. This is a third-party Actisense product carried by Raymarine; an optional STNG-A06045 adaptor cable connects it directly to a Raymarine SeaTalkng network.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975527317844,"sku":"A80721","price":0.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"stng-elbow-spur-stng-straight-1m-a06081","title":"SeaTalkNG Elbow Spur to SeaTalkNG Straight, 1m","description":"\u003cp\u003eThe Raymarine A06081 is a 1-metre SeaTalkNG spur cable with a right-angle (elbow) SeaTalkNG connector at one end and a straight SeaTalkNG connector at the other. Both connectors are standard SeaTalkNG format, making this cable ideal for routing a spur at 90 degrees from a backbone or T-piece to a SeaTalkNG-native device in a confined installation space.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975530103124,"sku":"A06081","price":40.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"r70626","title":"RMK-6 Keypad Insert Pack (24 Buttons)","description":"\u003cp\u003eThis insert pack provides 24 replacement button label inserts for the Raymarine RMK-6 six-button NMEA 2000 keypad. The inserts allow users to re-label the keypad buttons to match their on-board switching layout or to replace worn and damaged legend sheets.\u003c\/p\u003e\u003cp\u003eSuitable for any RMK-6 keypad installation as a consumable replacement or when reconfiguring a digital switching system. The pack provides a generous supply of labels to cover multiple configuration changes.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975590527316,"sku":"R70626","price":55.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"t12217","title":"Raymarine NMEA 2000 Gateway Cable Kit","description":"\u003cp\u003eThe Raymarine T12217 is a NMEA 2000 gateway cable kit. It supplies the cabling required to connect a NMEA 2000 gateway into a Raymarine SeaTalkng \/ NMEA 2000 network, providing the interface between the gateway and the boat network.\u003c\/p\u003e\u003cp\u003eThis is a cable kit rather than the gateway itself. The exact kit contents and cable lengths are not detailed in the reachable Raymarine literature and have been omitted rather than estimated; the kit's purpose is taken from the part description. Confirm the kit contents and the matching gateway against the relevant Raymarine documentation before ordering.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975634272596,"sku":"T12217","price":130.0,"currency_code":"GBP","in_stock":true}]},{"product_id":"t70418","title":"Raymarine RMK-6 Keypad with 2 Keypad Button Sheets","description":"\u003cp\u003eThis bundle includes the Raymarine RMK-6 six-button NMEA 2000 keypad together with two additional keypad button legend sheets, providing extra labelling options for custom digital switching configurations.\u003c\/p\u003e\u003cp\u003eThe RMK-6 connects via NMEA 2000 and is designed for use with Raymarine LightHouse digital switching systems, allowing on-board control of lighting, pumps and electrical circuits from a dedicated panel. The additional button sheets allow installers or owners to create custom labels for unique switching setups.\u003c\/p\u003e","brand":"Raymarine","offers":[{"title":"Default Title","offer_id":55975643382100,"sku":"T70418","price":475.0,"currency_code":"GBP","in_stock":true}]}],"url":"https:\/\/hme.sprechen.dev\/collections\/raymarine-nmea-2000.oembed","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}