Raymarine

Raymarine DST810 Gen2 Smart Transducer

£425.00
Tax included.
E70667
The Raymarine DST810 Gen2 is a smart through-hull multisensor that puts depth, speed through water, water temperature and vessel attitude on your SeaTalk NG or NMEA 2000 network from a single 2 inch fitting. Its Gen2 paddlewheel reads from below 0.3 knots and stays accurate to 45 knots. Calibration is wireless, via Bluetooth and Airmar's free CAST app.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine DST810 Gen2 smart transducer (E70667) combines four sensors in one low-profile 2 inch through-hull fitting: depth, speed through water, water temperature and an attitude sensor measuring heel and trim. It plugs straight into a SeaTalk NG or NMEA 2000 backbone and feeds every compatible instrument, chartplotter and multifunction display on the network.

The Gen2 paddlewheel starts reading below 0.3 knots, is linear from 0.6 knots and stays accurate to 45 knots, with a smooth 5.7 Hz speed output. Combined with the attitude sensor, it delivers heel-compensated speed through water, and calibration is handled wirelessly over Bluetooth in Airmar's free CAST app, including advanced multi-angle, multi-speed calibrations.

The 235 kHz working frequency avoids interference with onboard fishfinders. The retractable plastic housing has a water valve for easy maintenance, suits fibreglass or metal hulls with up to 22 degrees of deadrise, and the sensor insert retrofits existing TA910, T942 and T943 housings. The replacement Gen2 paddlewheel kit is R70961.

PRODUCT DETAILS

  • Depth, speed, temperature and attitude from a single 2 inch through-hull fitting
  • Gen2 paddlewheel reads below 0.3 knots and stays accurate to 45 knots
  • Smooth 5.7 Hz speed output (5x per second)
  • Heel-compensated speed via the built-in attitude sensor
  • Wireless calibration over Bluetooth with Airmar's free CAST app
  • 235 kHz frequency avoids interference with fishfinders
  • Plugs directly into SeaTalk NG / NMEA 2000 networks (LEN 3)
  • Retractable plastic housing with water valve; retrofits TA910, T942 and T943 housings

No compatible transducers listed for this product.

Sensor

FunctionsDepth, speed through water, water temperature, attitude (heel and trim)
Operating frequency235 kHz (avoids interference with other depth sounders and fishfinders)
Beamwidth10° x 44°
Depth range0.5 m (1.6 ft) to 100 m (330 ft)
Speed rangeStart-up below 0.3 knots, linear from 0.6 knots, accurate up to 45 knots
Data rateDepth 1x per second; speed 5x per second (5.7 Hz output); heel and trim 10x per second
Speed sensorGen2 paddlewheel, 20,000 pulses per nautical mile
Temperature accuracy±0.5 °C (±1.8 °F)
Water temperature range-10 °C to 40 °C (14 °F to 104 °F)

Electrical

Protocol outputNMEA 2000 (SeaTalk NG connector)
NMEA 2000 LEN3
Supply voltage9 to 16 V dc
Power rating80 W
BluetoothBluetooth BLE for calibration via the Airmar CAST app
CableCaptive SeaTalk NG cable, 2.5 m (8 ft)

Physical

Mounting styleLow-profile through-hull, 2 inch fitting
Hole size51 mm (2 in)
HousingHigh-strength plastic, retractable with water valve
Hull materialFibreglass or metal hulls
Maximum hull deadrise22°
Usable shaft length57 mm (2.25 in)
Weight0.9 kg (2 lb)
Housing compatibilityRetrofits TA910, T942 and T943 housings, and most Airmar 2 inch housings

No videos available for this product.

What data does the DST810 provide?
Depth, speed through water, water temperature and vessel attitude (heel and trim) from one through-hull sensor, output over NMEA 2000 / SeaTalk NG. (raymarine.com DST810 page)
Which displays work with the DST810?
Any SeaTalk NG or NMEA 2000 connected Raymarine display, including Axiom chartplotters and i70s instrument displays. Plug it into the backbone and the data appears on every compatible screen. (raymarine.com DST810 page)
How do I calibrate the DST810?
Wirelessly, using Airmar's free CAST app over Bluetooth, including basic and advanced heel-compensated speed calibrations at multiple heel angles and speeds. (raymarine.com DST810 page)
Will the DST810 Gen2 fit my existing housing?
The sensor insert retrofits the existing TA910, T942 and T943 through-hull housings, and most Airmar 2 inch housings. (Raymarine TU 0810)
What changed on the Gen2 (E70667) versus the original DST810 (E70617)?
A new Gen2 paddlewheel with start-up below 0.3 knots and linear performance from 0.6 knots, plus software with finer paddle wheel resolution and less jitter at low speed. Other specifications are unchanged. The Gen2 paddlewheel cannot be retrofitted to the E70617. (Raymarine TU 0810)