{"title":"Victron Energy DC-DC Converters","description":"\u003ch2\u003eVictron Energy DC-DC Converters\u003c\/h2\u003e\u003cp\u003eVictron Energy is the trusted name in marine power conversion and battery management. This is the Victron Energy dc-dc converters range: DC-DC converters for charging and voltage conversion.\u003c\/p\u003e\u003cp\u003eBrowse the full \u003ca href=\"\/collections\/victron-energy\"\u003eVictron Energy range\u003c\/a\u003e or \u003ca href=\"\/collections\/dc-dc-converters\"\u003eDC-DC Converters from every brand\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"victron-orion-tr-12-12-30a-360w-dc-dc-charger-ori121236120","title":"Victron Orion-Tr Smart 12\/12-30 (360W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/12-30 (360W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 12V service battery from a 12V source such as a vehicle alternator or starter battery. It delivers up to 30 A of continuous charge current and 360 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973313315156,"sku":"ORI121236120","price":282.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_0a419374-2268-464f-b5cc-6dc0fc7bac5c.jpg?v=1782825484"},{"product_id":"victron-orion-tr-12-24-15a-360w-isolated-dc-dc-charger-ori122436120","title":"Victron Orion-Tr Smart 12\/24-15 (360W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/24-15 (360W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 24V service battery from a 12V source such as a vehicle alternator or starter battery. It delivers up to 15 A of continuous charge current and 360 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973319311700,"sku":"ORI122436120","price":282.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_11516da7-b34e-44fa-8fdd-961645eb69b4.jpg?v=1782825488"},{"product_id":"victron-orion-isolated-dc-dc-converter-12v-input-24v-output-360w-ori122441110","title":"Victron Orion-Tr 12\/24-15 (360W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/24-15 (360W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 24V output, delivering up to 15A continuous at 24.2 V. It provides 360W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973319835988,"sku":"ORI122441110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_f2ab2ca2-0184-406f-b740-d894cd37abb6.jpg?v=1782825498"},{"product_id":"victron-orion-tr-12-48-8a-380w-isolated-dc-dc-converter-ori124838110","title":"Victron Orion-Tr 12\/48-8 (380W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/48-8 (380W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 48V output, delivering up to 8A continuous at 48.2 V. It provides 380W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 40-60 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973321441620,"sku":"ORI124838110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_1381fccd-e514-4d4a-975e-54dc30a4bd6c.jpg?v=1782825502"},{"product_id":"victron-orion-non-isolated-dc-dc-converter-12v-in-24v-out-20a-ori122420020","title":"Victron Orion 12\/24-20 Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion 12\/24-20 is a non-isolated DC-DC converter that steps a 12V supply up to a 24V output, delivering up to 20A (480W continuous). The output is adjustable with a potentiometer over a 20 to 30V range, with a factory setting of 26.4V, so it can power 24V equipment from a 12V system or buffer-charge a 24V battery from a 12V source.\u003c\/p\u003e\u003cp\u003eEfficiency is around 93 percent and a temperature-controlled fan keeps the unit cool at this higher power level. A remote on\/off connector removes the need for a high-current switch in the input wiring and can be driven by a low-power switch or the engine run\/stop signal. Adjustable-output models can be paralleled, up to five units, to increase the available output current.\u003c\/p\u003e\u003cp\u003ePower connections use M6 bolts for secure high-current wiring, and the converter installs without special tools.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973338284372,"sku":"ORI122420020","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_highpower_a22025e0-9ec8-4f35-b14f-0ea35910cd16.jpg?v=1782825515"},{"product_id":"victron-orion-non-isolated-dc-dc-converter-18-35v-in-13-2v-out-15a-ori241215200","title":"Victron Orion-Tr 24\/12-15 Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-15 is a non-isolated DC-DC converter that steps a 24V supply down to a regulated 12.5V output, delivering up to 15A continuous. It is built to power 12V equipment from a 24V system rather than to charge a battery; where controlled battery charging is required, an Orion-Tr Smart charger should be used instead.\u003c\/p\u003e\u003cp\u003eSynchronous rectification gives a high full-load efficiency of around 97 percent, which limits heat and input current. The output remains stable across an 18 to 35V input range, making the unit a reliable supply for electronics, lighting and other 12V loads on boats, in vehicles and in off-grid systems.\u003c\/p\u003e\u003cp\u003eThe converter uses screw terminals and needs no special tools to fit, and provides IP43 protection for the electronics when installed with the terminals facing downwards.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":55973338906964,"sku":"ORI241215200","price":43.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_noniso_3e595607-1840-43e8-aa35-39d28427be8b.jpg?v=1782825512"},{"product_id":"orion-tr-12-12-30-360w-non-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 12\/12-30 (360W) Non-Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/12-30 is a non-isolated DC-DC charger that draws from a 12V source and charges a 12V service battery at up to 30A (360W continuous at 40 degrees C). With a wide input range of 8 to 17V and a buck-boost design, it keeps the output stable even when the supply voltage sags, which is common on boats and vehicles with long cable runs or where a Euro 5 or Euro 6 smart alternator delivers a reduced charging voltage.\u003c\/p\u003e\u003cp\u003eAn adaptive three-stage charge algorithm (bulk, absorption, float) recharges lead-acid and lithium batteries correctly, shortening the absorption period after shallow discharges to avoid overcharging and extending it after a deep discharge. An engine-running detection mechanism protects the starter battery from being drawn down, and the unit can alternatively be configured as a fixed-voltage power supply. Built-in Bluetooth allows monitoring, configuration and firmware updates through the VictronConnect app.\u003c\/p\u003e\u003cp\u003eThe charger is short-circuit proof, can be paralleled without limit to raise the available current, and offers IP43 protection for the electronics when fitted with the screw terminals facing downwards. A remote on\/off input is provided and no special tools are needed for installation.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272513106260,"sku":"ORI121236140","price":249.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_9a461936-bab7-4db2-a581-d44b5ffd3653.jpg?v=1782825493"},{"product_id":"victron-orion-isolated-dc-dc-converter-12v-input-12v-output-360w","title":"Victron Orion-Tr 12\/12-30 (360W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/12-30 (360W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 12V output, delivering up to 30A continuous at 12.2 V. It provides 360W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272571007316,"sku":"ORI121240110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_2a0a604d-4621-4e84-8a90-a52e0f8f91ce.jpg?v=1782825500"},{"product_id":"victron-orion-isolated-dc-dc-converter-24v-input-12v-output-360w","title":"Victron Orion-Tr 24\/12-30 (360W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-30 (360W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 12V output, delivering up to 30A continuous at 12.2 V. It provides 360W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272571662676,"sku":"ORI241240110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_5c887a10-0d83-419a-9ab8-98e82b4a6d0f.jpg?v=1782825505"},{"product_id":"victron-orion-isolated-dc-dc-converter-48v-input-12v-output-360w","title":"Victron Orion-Tr 48\/12-30 (360W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/12-30 is an isolated DC-DC converter rated at 360W continuous, converting a 32-70 V input into a nominal 12.2 V output. The output voltage is adjustable across 10-15 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272572186964,"sku":"ORI481240110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_31a5633d-d193-4a25-9573-89ef82893ec2.jpg?v=1782825504"},{"product_id":"victron-orion-isolated-dc-dc-converter-110vdc-input-12v-output-360w","title":"Victron Orion 110\/12 (360W) 110V Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion 110\/12 is a 110V isolated DC-DC converter rated at 360W, taking a nominal 110V DC input (60 to 140V) and delivering a regulated 12.5 V output. Galvanic isolation of more than 400V rms is provided between the input, output and case, suiting installations where the input and output grounds must remain separate.\u003c\/p\u003e\u003cp\u003eThe converter uses temperature-controlled fan-assisted cooling and is housed in an anodised aluminium case. It is short circuit proof and protected against overheating, reverse polarity and over voltage, the latter by a varistor that also guards against load dump. Connections are made with 6.3 mm (0.25 inch) push-on flat blade terminals.\u003c\/p\u003e\u003cp\u003eThis is a voltage converter rather than a battery charger and has no multi-stage charge algorithm. It is intended for powering DC loads from a 110V DC supply.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272572219732,"sku":"ORI110123610","price":423.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_highpower.jpg?v=1782825513"},{"product_id":"victron-orion-isolated-dc-dc-converter-110vdc-input-24v-output-360w","title":"Victron Orion 110\/24 (360W) 110V Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion 110\/24 is a 110V isolated DC-DC converter rated at 360W, taking a nominal 110V DC input (60 to 140V) and delivering a regulated 24 V output. Galvanic isolation of more than 400V rms is provided between the input, output and case, suiting installations where the input and output grounds must remain separate.\u003c\/p\u003e\u003cp\u003eThe converter uses temperature-controlled fan-assisted cooling and is housed in an anodised aluminium case. It is short circuit proof and protected against overheating, reverse polarity and over voltage, the latter by a varistor that also guards against load dump. Connections are made with 6.3 mm (0.25 inch) push-on flat blade terminals.\u003c\/p\u003e\u003cp\u003eThis is a voltage converter rather than a battery charger and has no multi-stage charge algorithm. It is intended for powering DC loads from a 110V DC supply.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272572809556,"sku":"ORI110243610","price":423.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_highpower_2a368d04-da04-403b-994d-10bc969f7a5f.jpg?v=1782825514"},{"product_id":"victron-orion-non-isolated-dc-dc-converter-9-18v-in-24v-out-10a","title":"Victron Orion 12\/24-10 Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion 12\/24-10 is a non-isolated DC-DC converter that steps a 12V supply up to a 24V output, delivering up to 10A (240W continuous). The output is adjustable with a potentiometer over a 20 to 30V range, with a factory setting of 26.4V, so it can power 24V equipment from a 12V system or buffer-charge a 24V battery from a 12V source.\u003c\/p\u003e\u003cp\u003eEfficiency is around 95 percent and the converter holds a stable output across a 9 to 18V input. It is fanless and draws a low off-load current. Adjustable-output models in this range can also be connected in parallel, up to five units, to increase the available output current.\u003c\/p\u003e\u003cp\u003eConnections are made with 6.3 mm Faston tabs and the supply includes insulated female crimp terminals, allowing quick installation without special tools.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272573170004,"sku":"ORI122410020","price":72.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_highpower_c2f4a2fa-b09e-48b5-9ed3-324f9917d6be.jpg?v=1782825517"},{"product_id":"orion-tr-48-24-5-120w-isolated-dc-dc-converter","title":"Victron Orion-Tr 48\/24-5 (120W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/24-5 is an isolated DC-DC converter rated at 120W continuous, converting a 32-70 V input into a nominal 24.2 V output. The output voltage is adjustable across 18-30 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272574972244,"sku":"ORI482410110","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_213edb23-8c03-425a-8ffa-2f3c3fcc74d3.jpg?v=1782825503"},{"product_id":"victron-orion-non-isolated-dc-dc-converter-12v-in-24v-out-8a","title":"Victron Orion 12\/24-8 Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion 12\/24-8 is a non-isolated DC-DC converter that steps a 12V supply up to a fixed 24V output, delivering up to 8A (192W continuous). It is designed to power 24V equipment from a 12V system. Unlike the adjustable models in the high-power range it has a fixed output and is not intended to buffer-charge a battery; where controlled charging is needed an Orion-Tr Smart charger should be used.\u003c\/p\u003e\u003cp\u003eThe converter holds a stable output across a 9 to 18V input and is short-circuit protected, with a quiet fanless design and a low off-load current. It suits onboard, automotive and off-grid installations where a small amount of 24V power is required from a 12V source.\u003c\/p\u003e\u003cp\u003eConnections are made with 6.3 mm Faston tabs and the supply includes four insulated female crimp terminals, so the unit installs quickly without special tools.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272721215828,"sku":"ORI122408020","price":62.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_highpower_fa85a4db-6f6b-46e7-b453-da0691fc55c5.jpg?v=1782825516"},{"product_id":"orion-ip67-non-isolated-dc-dc-converter-24v-in-12v-out-20a","title":"Victron Orion IP67 24\/12-20 DC-DC Converter","description":"\u003cp\u003eThe Orion IP67 24\/12-20 is a fully encapsulated 24V to 12V DC-DC converter for harsh and exposed installations. The casing is cast aluminium and the electronics are moulded in resin, making the unit waterproof, shockproof and ignition protected, so water, oil and dirt will not damage it. It supplies a stable 12V output of up to 20A from a 24V battery system.\u003c\/p\u003e\u003cp\u003eA wide 15 to 40V input range keeps the output stable during the voltage surges and sags caused by other equipment on the same battery, and the converter is protected against overheating for use in hot environments such as a machine room. Input and output cables of 1.8m are fitted, which in most cases removes the need for intermediate cable joints in an area where an IP67 rating is required. The unit is short-circuit proof, recovers automatically from an overload through hiccup mode, and is protected against reverse polarity with an external fuse or circuit breaker.\u003c\/p\u003e\u003cp\u003eThe Orion IP67 supplies a fixed output voltage and is intended as a converter rather than a battery charger. It has no charge algorithm and no Bluetooth. For controlled multi-stage battery charging from a DC source, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272743629140,"sku":"ORI241220260","price":51.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553420460372.jpg?v=1783020484"},{"product_id":"orion-ip67-non-isolated-dc-dc-converter-24v-in-12v-out-5a","title":"Victron Orion IP67 24\/12-5 DC-DC Converter","description":"\u003cp\u003eThe Orion IP67 24\/12-5 is a fully encapsulated 24V to 12V DC-DC converter for harsh and exposed installations. The casing is cast aluminium and the electronics are moulded in resin, making the unit waterproof, shockproof and ignition protected, so water, oil and dirt will not damage it. It supplies a stable 12V output of up to 5A from a 24V battery system.\u003c\/p\u003e\u003cp\u003eA wide 15 to 40V input range keeps the output stable during the voltage surges and sags caused by other equipment on the same battery, and the converter is protected against overheating for use in hot environments such as a machine room. Input and output cables of 1.8m are fitted, which in most cases removes the need for intermediate cable joints in an area where an IP67 rating is required. The unit is short-circuit proof, recovers automatically from an overload through hiccup mode, and is protected against reverse polarity with an external fuse or circuit breaker.\u003c\/p\u003e\u003cp\u003eThe Orion IP67 supplies a fixed output voltage and is intended as a converter rather than a battery charger. It has no charge algorithm and no Bluetooth. For controlled multi-stage battery charging from a DC source, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272746611028,"sku":"ORI241205260","price":24.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553420689748.jpg?v=1783020481"},{"product_id":"orion-ip67-non-isolated-dc-dc-converter-24v-in-12v-out-10a","title":"Victron Orion IP67 24\/12-10 DC-DC Converter","description":"\u003cp\u003eThe Orion IP67 24\/12-10 is a fully encapsulated 24V to 12V DC-DC converter for harsh and exposed installations. The casing is cast aluminium and the electronics are moulded in resin, making the unit waterproof, shockproof and ignition protected, so water, oil and dirt will not damage it. It supplies a stable 12V output of up to 10A from a 24V battery system.\u003c\/p\u003e\u003cp\u003eA wide 15 to 40V input range keeps the output stable during the voltage surges and sags caused by other equipment on the same battery, and the converter is protected against overheating for use in hot environments such as a machine room. Input and output cables of 1.8m are fitted, which in most cases removes the need for intermediate cable joints in an area where an IP67 rating is required. The unit is short-circuit proof, recovers automatically from an overload through hiccup mode, and is protected against reverse polarity with an external fuse or circuit breaker.\u003c\/p\u003e\u003cp\u003eThe Orion IP67 supplies a fixed output voltage and is intended as a converter rather than a battery charger. It has no charge algorithm and no Bluetooth. For controlled multi-stage battery charging from a DC source, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272746905940,"sku":"ORI241210260","price":39.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553420755284.jpg?v=1783020483"},{"product_id":"orion-tr-24-12-9-110w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/12-9 (110W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-9 (110W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 12V output, delivering up to 9A continuous at 12.2 V. It provides 110W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272746971476,"sku":"ORI241210110R","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_f4921065-bccf-471e-b3f6-0f0877c7d9b1.jpg?v=1782825506"},{"product_id":"50a-buck-boost-dc-dc-converter-12-24v","title":"Victron Orion Buck-Boost DC-DC 12\/24V 50A","description":"\u003cp\u003eThe Victron Buck-Boost DC-DC Converter is a programmable converter for charging a 12V or 24V service battery in vehicles fitted with a smart alternator, such as those with regenerative braking and Euro 5 or Euro 6 engines. On these vehicles the alternator voltage varies widely and can be too high or too low to charge an auxiliary battery correctly. The Buck-Boost charges the auxiliary battery at a stable, pre-set voltage regardless of what the alternator is doing, eliminating both the high voltages (for example 15.4 V on some Mercedes systems) and the low voltages a smart alternator produces.\u003c\/p\u003e\u003cp\u003eA single unit works with 12V, 24V and mixed 12\/24V systems: it can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery. A built-in engine-running detection system prevents deep discharge of the vehicle's starter battery, and the converter can alternatively be switched by a programmable input (D+, CAN bus or a (+)15 connection). This 50A model charges an auxiliary battery at up to 50 A on a 12V system or 25 A on a 24V system.\u003c\/p\u003e\u003cp\u003eThe converter is fully programmable through a simple PC application (a USB type A to type B cable is required), letting you set charge current, input current limit and charge parameters. Separate input and output status LEDs report converter state, input voltage, engine detection and battery condition at a glance.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272748773716,"sku":"ORI303050000","price":777.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553421443412.jpg?v=1783006588"},{"product_id":"orion-tr-12-12-9-110w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/12-9 (110W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/12-9 (110W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 12V output, delivering up to 9A continuous at 12.2 V. It provides 110W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272749527380,"sku":"ORI121210110R","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_274fa071-b2d0-44e3-b436-02348d212d9c.jpg?v=1782825501"},{"product_id":"orion-tr-12-24-5-120w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/24-5 (120W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/24-5 (120W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 24V output, delivering up to 5A continuous at 24.2 V. It provides 120W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272749822292,"sku":"ORI122410110","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_0e3ee794-7af2-40be-8782-149bbdbd2bc0.jpg?v=1782825507"},{"product_id":"orion-tr-24-24-5-120w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/24-5 (120W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/24-5 (120W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 24V output, delivering up to 5A continuous at 24.2 V. It provides 120W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272749887828,"sku":"ORI242410110R","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_86c3044c-ebc9-48d3-a098-95d4157c4500.jpg?v=1782825497"},{"product_id":"orion-tr-24-48-2-5-120w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/48-2,5 (120W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/48-2,5 is an isolated DC-DC converter rated at 120W continuous, converting a 16-35 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272750117204,"sku":"ORI244810110","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_23243e3a-f57e-41c6-a04b-1e1a38f55d6d.jpg?v=1782825499"},{"product_id":"orion-tr-48-12-9-110w-isolated-dc-dc-converter","title":"Victron Orion-Tr 48\/12-9 (110W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/12-9 is an isolated DC-DC converter rated at 110W continuous, converting a 32-70 V input into a nominal 12.2 V output. The output voltage is adjustable across 10-15 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272750182740,"sku":"ORI481210110","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_ad79f83f-ab8f-421c-93b2-cd8d64013595.jpg?v=1782825508"},{"product_id":"orion-tr-24-12v-5-amp-60w-non-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/12-5 (60W) Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-5 is a compact non-isolated DC-DC converter that steps a 24V supply down to a regulated 12.7V output, delivering up to 5A (60W continuous). It is intended to run 12V equipment from a 24V system rather than to charge a battery; where controlled battery charging is required, an Orion-Tr Smart charger should be used instead.\u003c\/p\u003e\u003cp\u003eSynchronous rectification gives a high full-load efficiency of around 95 percent, which keeps heat and current draw low. The converter holds a stable output across its 18 to 35V input range and is fully protected, making it well suited to powering electronics, lighting and other 12V loads aboard boats, in vehicles and in off-grid installations.\u003c\/p\u003e\u003cp\u003eHoused in a small enclosure with screw terminals, the unit installs without special tools and carries IP43 protection for the electronics when mounted with the terminals facing downwards.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272751198548,"sku":"ORI241205200","price":18.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_noniso_9021f692-18c7-40a8-9f4c-8d509969230f.jpg?v=1782825512"},{"product_id":"orion-tr-48-48-2-5-120w-isolated-dc-dc-converter","title":"Victron Orion-Tr 48\/48-2,5 (120W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/48-2,5 is an isolated DC-DC converter rated at 120W continuous, converting a 32-70 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272751231316,"sku":"ORI484810110","price":73.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_85148f26-d75f-4570-8c08-9e7aeef0d5ec.jpg?v=1782825497"},{"product_id":"orion-tr-24-12v-10-amp-120w-non-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/12-10 (120W) Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-10 is a non-isolated DC-DC converter that steps a 24V supply down to a regulated 12.5V output, delivering up to 10A (120W continuous). It is designed to run 12V equipment from a 24V system rather than to charge a battery; for controlled battery charging an Orion-Tr Smart charger should be used instead.\u003c\/p\u003e\u003cp\u003eSynchronous rectification gives a high full-load efficiency of around 97 percent, keeping heat and input current low. The output stays stable across an 18 to 35V input range, making the converter a dependable supply for electronics, lighting and other 12V loads on boats, in vehicles and in off-grid installations.\u003c\/p\u003e\u003cp\u003eThe unit uses screw terminals and installs without special tools, and offers IP43 protection for the electronics when mounted with the terminals facing downwards.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272751264084,"sku":"ORI241210200R","price":38.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_noniso.jpg?v=1782825510"},{"product_id":"25a-buck-boost-dc-dc-converter-12-24v","title":"Victron Orion Buck-Boost DC-DC 12\/24V 25A","description":"\u003cp\u003eThe Victron Buck-Boost DC-DC Converter is a programmable converter for charging a 12V or 24V service battery in vehicles fitted with a smart alternator, such as those with regenerative braking and Euro 5 or Euro 6 engines. On these vehicles the alternator voltage varies widely and can be too high or too low to charge an auxiliary battery correctly. The Buck-Boost charges the auxiliary battery at a stable, pre-set voltage regardless of what the alternator is doing, eliminating both the high voltages (for example 15.4 V on some Mercedes systems) and the low voltages a smart alternator produces.\u003c\/p\u003e\u003cp\u003eA single unit works with 12V, 24V and mixed 12\/24V systems: it can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery. A built-in engine-running detection system prevents deep discharge of the vehicle's starter battery, and the converter can alternatively be switched by a programmable input (D+, or a (+)15 connection). This 25A model charges an auxiliary battery at up to 25 A on a 12V system or 15 A on a 24V system.\u003c\/p\u003e\u003cp\u003eThe converter is fully programmable through a simple PC application (a USB type A to type B cable is required), letting you set charge current, input current limit and charge parameters. Separate input and output status LEDs report converter state, input voltage, engine detection and battery condition at a glance.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272758538580,"sku":"ORI303025000","price":626.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553423245652.jpg?v=1783006317"},{"product_id":"orion-tr-48-12-20-240w-isolated-dc-dc-converter","title":"Victron Orion-Tr 48\/12-20 (240W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/12-20 is an isolated DC-DC converter rated at 240W continuous, converting a 32-70 V input into a nominal 12.2 V output. The output voltage is adjustable across 10-15 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272760602964,"sku":"ORI481224110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_6d5e58dc-5898-45a6-8a29-5b44e8ae3053.jpg?v=1782825508"},{"product_id":"orion-tr-48-24-12-280w-isolated-dc-dc-converter","title":"Victron Orion-Tr 48\/24-12 (280W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/24-12 is an isolated DC-DC converter rated at 280W continuous, converting a 32-70 V input into a nominal 24.2 V output. The output voltage is adjustable across 18-30 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272760930644,"sku":"ORI482428110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_5b03cbf8-26a7-496d-9bcb-faf605244fb4.jpg?v=1782825503"},{"product_id":"orion-dc-dc-converter-48v-input-32-70v-48-2v-output-isolated-unit-280w-6a","title":"Victron Orion-Tr 48\/48-6 (280W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/48-6 is an isolated DC-DC converter rated at 280W continuous, converting a 32-70 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272761291092,"sku":"ORI484828110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_63d7655b-e0fe-436a-8780-7a24febf4337.jpg?v=1782825495"},{"product_id":"orion-tr-24-12-20-240w-non-isolated-dc-dc-converter-18-35v-input-12-5v","title":"Victron Orion-Tr 24\/12-20 (240W) Non-Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-20 is a non-isolated DC-DC converter that steps a 24V supply down to a regulated 12.5V output, delivering up to 20A (240W continuous). It is intended to power 12V equipment from a 24V system rather than to charge a battery; where controlled battery charging is required, an Orion-Tr Smart charger should be used instead.\u003c\/p\u003e\u003cp\u003eSynchronous rectification gives a high full-load efficiency of around 97 percent, keeping heat and input current low. The output remains stable across an 18 to 35V input range, making the converter well suited to running electronics, lighting and other 12V loads on boats, in vehicles and in off-grid installations.\u003c\/p\u003e\u003cp\u003eThe unit uses screw terminals and installs without special tools, and provides IP43 protection for the electronics when fitted with the terminals facing downwards.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272761323860,"sku":"ORI241220200R","price":48.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_noniso_519d07f9-91dc-4e6b-b94e-7925152be200.jpg?v=1782825512"},{"product_id":"orion-tr-24-24-12-280w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/24-12 (280W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/24-12 (280W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 24V output, delivering up to 12A continuous at 24.2 V. It provides 280W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272761389396,"sku":"ORI242428110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_80fcf610-641e-47ec-83db-fcc0625ac4ca.jpg?v=1782825509"},{"product_id":"orion-tr-12-12-18-220w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/12-18 (220W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/12-18 (220W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 12V output, delivering up to 18A continuous at 12.2 V. It provides 220W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272762470740,"sku":"ORI121222110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_a1737be3-10fe-4deb-9cca-efb5d55cd49b.jpg?v=1782825505"},{"product_id":"orion-tr-12-24-10-240w-isolated-dc-dc-converter","title":"Victron Orion-Tr 12\/24-10 (240W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 12\/24-10 (240W) is an isolated DC-DC converter that steps a 12V nominal input down or up to a regulated 24V output, delivering up to 10A continuous at 24.2 V. It provides 240W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272762601812,"sku":"ORI122424110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_e4087f74-7126-4ed5-9e59-f29545067be5.jpg?v=1782825501"},{"product_id":"orion-tr-24-12-20-240w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/12-20 (240W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/12-20 (240W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 12V output, delivering up to 20A continuous at 12.2 V. It provides 240W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 10-15 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272762962260,"sku":"ORI241224110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso.jpg?v=1782825494"},{"product_id":"orion-tr-24-48-6-280w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/48-6 (280W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/48-6 is an isolated DC-DC converter rated at 280W continuous, converting a 16-35 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272763093332,"sku":"ORI244828110","price":132.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_855dc07d-f5ae-4f80-ac58-10d7fb7e5a39.jpg?v=1782825496"},{"product_id":"orion-tr-24-24-17a-400w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/24-17 (400W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/24-17 (400W) is an isolated DC-DC converter that steps a 24V nominal input down or up to a regulated 24V output, delivering up to 17A continuous at 24.2 V. It provides 400W of continuous output power and uses galvanic isolation of 200VDC between input, output and case, which separates the two circuits and helps suppress ground loops and electrical noise.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable across 18-30 V, so the unit can be trimmed to suit the connected equipment. It is not intended for battery charging, as it has no charge algorithm. For charging a battery from a second source, Victron recommends an Orion-Tr Smart DC-DC charger instead. The converter is short circuit proof and an unlimited number of units can be connected in parallel to increase available output current.\u003c\/p\u003e\u003cp\u003eA remote on\/off terminal removes the need for a high current switch in the input wiring and can be driven by a low power switch or an engine run\/stop signal. Output current is reduced automatically at high ambient temperature to protect the unit, and all connections are made on screw terminals that need no special tools. With the screw terminals oriented downwards the converter carries an IP43 rating.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272763650388,"sku":"ORI242441110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_a421a63d-32d8-4a5d-9816-8d0e4ea412a7.jpg?v=1782825499"},{"product_id":"orion-tr-24-48-8-5a-400w-isolated-dc-dc-converter","title":"Victron Orion-Tr 24\/48-8,5 (400W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 24\/48-8,5 is an isolated DC-DC converter rated at 400W continuous, converting a 16-35 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272764109140,"sku":"ORI244841110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_d659d282-a9d4-41a8-b472-aa9c4df42bd5.jpg?v=1782825496"},{"product_id":"orion-tr-isolated-dc-dc-converter-48v-input-40-70v","title":"Victron Orion-Tr 48\/24-16 (380W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/24-16 is an isolated DC-DC converter rated at 380W continuous, converting a 32-70 V input into a nominal 24.2 V output. The output voltage is adjustable across 18-30 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272771285332,"sku":"ORI482441110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_12f2c324-b8aa-4bb6-b0f6-1856be97ebc1.jpg?v=1782825494"},{"product_id":"orion-isolated-dc-dc-converter-48v-input-40-70v-48-2v-output","title":"Victron Orion-Tr 48\/48-8 (380W) Isolated DC-DC Converter","description":"\u003cp\u003eThe Victron Orion-Tr 48\/48-8 is an isolated DC-DC converter rated at 380W continuous, converting a 32-70 V input into a nominal 48.2 V output. The output voltage is adjustable across 40-60 V, and galvanic isolation of 200V DC is provided between the input, output and case, which makes it suitable for systems where the input and output grounds must be kept separate.\u003c\/p\u003e\u003cp\u003eAll models are short circuit proof and protected against over temperature, with the output current reducing progressively at high ambient temperatures. A remote on\/off terminal removes the need for a high current switch in the input wiring and can be operated by a low power switch or, for example, an engine run\/stop signal. The unit is rated to IP43 when installed with the screw terminals facing downwards, and an unlimited number of units can be connected in parallel to increase the available output current.\u003c\/p\u003e\u003cp\u003eThe output voltage is adjustable and the Orion-Tr converter is not intended for battery charging. Where a regulated charge profile is required, use an Orion-Tr Smart DC-DC charger instead.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272771383636,"sku":"ORI484841110","price":232.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_conv_iso_6918baf7-f173-4091-81f0-c54754ab786e.jpg?v=1782825506"},{"product_id":"100a-buck-boost-dc-dc-converter-12-24v","title":"Victron Orion Buck-Boost DC-DC 12\/24V 100A","description":"\u003cp\u003eThe Victron Buck-Boost DC-DC Converter is a programmable converter for charging a 12V or 24V service battery in vehicles fitted with a smart alternator, such as those with regenerative braking and Euro 5 or Euro 6 engines. On these vehicles the alternator voltage varies widely and can be too high or too low to charge an auxiliary battery correctly. The Buck-Boost charges the auxiliary battery at a stable, pre-set voltage regardless of what the alternator is doing, eliminating both the high voltages (for example 15.4 V on some Mercedes systems) and the low voltages a smart alternator produces.\u003c\/p\u003e\u003cp\u003eA single unit works with 12V, 24V and mixed 12\/24V systems: it can be programmed to charge a 12V or a 24V auxiliary battery from either a 12V or a 24V alternator and starter battery. A built-in engine-running detection system prevents deep discharge of the vehicle's starter battery, and the converter can alternatively be switched by a programmable input (D+, CAN bus or a (+)15 connection). This 100A model is the largest in the range and charges an auxiliary battery at up to 100 A on a 12V system or 50 A on a 24V system.\u003c\/p\u003e\u003cp\u003eThe converter is fully programmable through a simple PC application (a USB type A to type B cable is required), letting you set charge current, input current limit and charge parameters. Separate input and output status LEDs report converter state, input voltage, engine detection and battery condition at a glance.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272784294228,"sku":"ORI303100000","price":1360.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553432879444.jpg?v=1783006295"},{"product_id":"orion-tr-12-12-18a-220w-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 12\/12-18 (220W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/12-18 (220W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 12V service battery from a 12V source such as a vehicle alternator or starter battery. It delivers up to 18 A of continuous charge current and 220 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272788619604,"sku":"ORI121222120","price":184.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_fe94ea64-d5e8-45b5-ad0c-f5726a3f944a.jpg?v=1782825490"},{"product_id":"orion-tr-12-24-10-240w-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 12\/24-10 (240W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/24-10 (240W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 24V service battery from a 12V source such as a vehicle alternator or starter battery. It delivers up to 10 A of continuous charge current and 240 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272789274964,"sku":"ORI122424120","price":184.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_6dff1f52-65d4-4e66-a241-12bd4523a639.jpg?v=1782825488"},{"product_id":"orion-tr-24-12-20-240w-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 24\/12-20 (240W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 24\/12-20 (240W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 12V service battery from a 24V source such as a vehicle alternator or starter battery. It delivers up to 20 A of continuous charge current and 240 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272789471572,"sku":"ORI241224120","price":184.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart.jpg?v=1782825483"},{"product_id":"orion-tr-24-12-30-360w-isolated-dc-dc","title":"Victron Orion-Tr Smart 24\/12-30 (360W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 24\/12-30 (360W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 12V service battery from a 24V source such as a vehicle alternator or starter battery. It delivers up to 30 A of continuous charge current and 360 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272790159700,"sku":"ORI241236120","price":282.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_d31590d9-99da-43ce-bbb9-a9b6a27c12c5.jpg?v=1782825490"},{"product_id":"orion-tr-12-24-15-360w-non-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 12\/24-15 (360W) Non-Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 12\/24-15 steps a 12V supply up to charge a 24V service battery at up to 15A (360W continuous at 40 degrees C). Its wide 8 to 17V input and buck-boost design hold the output steady even when the source voltage drops, a frequent situation on boats and vehicles fitted with a Euro 5 or Euro 6 smart alternator or where long cable runs cause voltage loss.\u003c\/p\u003e\u003cp\u003eAn adaptive three-stage charge algorithm (bulk, absorption, float) suits both lead-acid and lithium batteries, shortening the absorption phase after a shallow discharge and lengthening it after a deep one so the battery is fully recharged without being overcharged. Engine-running detection guards the input battery against discharge, and the converter can instead be set as a fixed-voltage power supply. Built-in Bluetooth provides monitoring, configuration and firmware updates through the VictronConnect app.\u003c\/p\u003e\u003cp\u003eThe unit is short-circuit proof, can be paralleled in unlimited numbers to increase output, and carries IP43 protection for the electronics when installed with the screw terminals facing down. A remote on\/off input is fitted and installation needs no special tools.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272790192468,"sku":"ORI122436140","price":249.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_d09de2ea-009a-43c5-bbeb-a115f2c17016.jpg?v=1782825485"},{"product_id":"orion-tr-24-24-12-280w-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 24\/24-12 (280W) Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 24\/24-12 (280W) Isolated DC-DC Charger is a galvanically isolated DC-DC charger that charges a 24V service battery from a 24V source such as a vehicle alternator or starter battery. It delivers up to 12 A of continuous charge current and 280 W of continuous output power, and uses an adaptive three-stage charge algorithm (bulk, absorption, float) to charge both lead-acid and lithium batteries correctly.\u003c\/p\u003e\u003cp\u003eGalvanic isolation of 200Vdc between input, output and case allows the charger to be used where the input and output grounds must be kept separate, for example to avoid earth loops in steel or aluminium vessels. Engine shutdown detection works with smart alternators by sensing when the engine is running, so the unit does not discharge the starter battery when the alternator is not supplying power. Extensive protection covers overload, short circuit, over-temperature with power derating, and connector over-temperature.\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth lets you configure and monitor the charger from the VictronConnect app on a phone or tablet, with a programmable charge algorithm and eight preprogrammed battery presets. The remote on\/off connector allows hard-wired or BMS control. Note that this model is a battery charger and is not equipped with a VE.Direct port. Multiple units can be wired in parallel for higher output.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272790421844,"sku":"ORI242428120","price":184.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_07c4b6b3-09ef-4389-a486-328f29220576.jpg?v=1782825491"},{"product_id":"orion-tr-24-12-30-360w-non-isolated-dc-dc-charger","title":"Victron Orion-Tr Smart 24\/12-30 (360W) Non-Isolated DC-DC Charger","description":"\u003cp\u003eThe Victron Orion-Tr Smart 24\/12-30 takes a 24V supply and charges a 12V service battery at up to 30A (360W continuous at 40 degrees C). A wide 16 to 35V input combined with a buck-boost design keeps the output stable even when the source voltage sags, which is common on boats and vehicles with long cable runs or a Euro 5 or Euro 6 smart alternator that supplies a reduced charging voltage.\u003c\/p\u003e\u003cp\u003eAn adaptive three-stage charge algorithm (bulk, absorption, float) recharges lead-acid and lithium batteries correctly, automatically shortening the absorption phase after a shallow discharge and extending it after a deep discharge. Engine-running detection protects the input battery from being drawn down, and the unit can instead serve as a fixed-voltage power supply. Built-in Bluetooth gives monitoring, configuration and firmware updates through the VictronConnect app.\u003c\/p\u003e\u003cp\u003eThe charger is short-circuit proof, can be paralleled in unlimited numbers to raise the available current, and provides IP43 protection for the electronics when fitted with the screw terminals facing downwards. A remote on\/off input is included and no special tools are required to install it.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272790454612,"sku":"ORI241236140","price":249.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/sq_smart_24958552-1dc3-4e37-907c-91a90588ee66.jpg?v=1782825487"}],"url":"https:\/\/hme.sprechen.dev\/collections\/victron-dc-dc-converters.oembed?page=2","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}