Victron

Victron Skylla Control Panel

£180.00
Tax included.
SDRPSKC
The Victron Skylla Control is a metal-enclosure remote control and monitoring panel for Skylla-i and Skylla-IP65 chargers. It connects over VE.Can (NMEA2000) and lets you switch the charger on or off, set the AC input-current limit and monitor charging at a glance.
✓ Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Skylla Control gives you full remote control of a Victron Skylla-i or Skylla-IP65 charger from a convenient mounting location. Connecting over VE.Can (NMEA2000) with a standard RJ45 UTP cable, it lets you switch the charger on or off, read charge current, battery voltage and input current, and follow the charge stage through clear LED status indication. A rotary knob sets the PowerControl input-current limit, so you can cap the draw from limited shore-power connections or a small generator and avoid tripping the supply. Housed in a robust metal enclosure and supplied with two RJ45 bus terminators, the panel suits permanent installation on board. More than one panel can be connected to a single charger, or to a set of synchronised or parallel chargers, so you can monitor and control the system from several points.

PRODUCT DETAILS

  • Remote on/off and monitoring for Victron Skylla-i and Skylla-IP65 chargers
  • Connects over VE.Can (NMEA2000) via RJ45 UTP cable; supplied with two bus terminators
  • LED status indication for bulk, absorption, float/storage and alarm, with a rotary knob
  • PowerControl input-current limit to suit limited shore power or small generators
  • Reads charge current, battery voltage and input current
  • Multiple panels can be connected to one charger or a set of synchronised chargers
  • Robust metal enclosure for permanent installation

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Connectivity

ConnectionVE.Can (NMEA2000), RJ45 UTP cable; two RJ45 bus terminators supplied
CompatibilityVictron Skylla-i and Skylla-IP65 chargers

Physical

EnclosureMetal panel

No videos available for this product.

Which chargers does the Skylla Control work with?
It is the remote control and monitoring panel for Victron Skylla-i and Skylla-IP65 chargers, connecting over VE.Can (NMEA2000).
Can I limit the shore-power draw with it?
Yes. The rotary knob sets the PowerControl AC input-current limit, so the charger reduces its draw to suit a limited shore-power connection or a small generator.
Can more than one panel be used?
Yes. Multiple panels can be connected to one charger, or to a set of synchronised or parallel chargers.