{"product_id":"battery-isolating-splitter-fet-based-100a-3-outputs","title":"Victron Argofet Battery Isolator 100A (3 Outputs)","description":"\u003cp\u003eThe Victron Argofet Battery Isolator 100A charges three independent battery banks from a single alternator or charger while keeping all three fully isolated from one another. Discharging one bank, such as a domestic service battery, will not draw down the others, so the engine start battery is always protected and ready.\u003c\/p\u003e\u003cp\u003eUnlike diode isolators, the Argofet uses FET (field-effect transistor) technology with virtually no voltage loss: the drop is under 0.02 V at low current and averages just 0.1 V at higher currents. Because there is almost no drop, there is no need to raise the alternator output voltage, so charging stays accurate and batteries reach a full state of charge. A current-limited alternator energize input supplies B+ when the engine run switch is closed, so machine-sensing alternators start charging reliably.\u003c\/p\u003e\u003cp\u003eThe isolator adjusts automatically to 12 V or 24 V systems and needs no maintenance. M8 bolt connections and a compact enclosure suit marine, motorhome and off-grid installations where up to three banks share one charge source without the losses of a diode splitter.\u003c\/p\u003e","brand":"Victron","offers":[{"title":"Default Title","offer_id":56272573333844,"sku":"ARG100301020","price":133.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0941\/9702\/3060\/files\/victron-15553401454932.jpg?v=1783006605","url":"https:\/\/hme.sprechen.dev\/products\/battery-isolating-splitter-fet-based-100a-3-outputs","provider":"Hudson Marine Electronics","version":"1.0","type":"link"}