EGIS
EGIS XD - Kit Dual + Triple + Dual Flex 2 (Relay/ACR)(Relay/ACR/R | 8870-6530-2535-6350B
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The EGIS XD Series Dual + Triple + Dual Kit is a pre-configured three-module bundle for the most demanding multi-bank installations. It combines a Dual module (Relay/ACR), a Triple module (Switch/ACR/Switch) and a second Dual module (ACR/Relay) to deliver seven independent 500A circuits, with three automatic charging relays sharing charge across the system, two electronic battery-disconnect switches isolating main banks, and switched relays handling loads. The supplied link and crossover busbars tie all three units together, so a complex battery system is built from one compact, knob-equipped assembly rather than a sprawl of individual relays and cables. Every circuit is rated 500A continuous and 1500A maximum cranking across an 8 to 36 V DC range.
All three modules share the proven XD construction: sealed to IP67 and IP6K9K, high-temperature electronics, integrated Gortex vents and stainless steel cable-lug studs that accept 1/4-20 / M6 hardware. Each circuit is dip-switch programmable under its included protective cover, carries a three-position manual override knob and reports status via front and remote LEDs, with off-state draw of just 1.3 mA. Deutsch connectors are pin-for-pin compatible with legacy ML Series bi-stable relays. Supplied as a bulk pack for OEM and trade installation.
PRODUCT DETAILS
- Pre-configured three-module kit: Dual (Relay/ACR) + Triple (Switch/ACR/Switch) + Dual (ACR/Relay)
- Seven independent 500A circuits with three automatic charging relays
- Two electronic battery-disconnect switches for main-bank isolation
- Includes link and crossover busbars to join all three modules
- Three-position manual override knob on every circuit
- Sealed to IP67 / IP6K9K with integrated Gortex vents and 1.3 mA off-state draw
- Supplied bulk packed for OEM and trade installation
- 1 x EGIS XD Series Dual module (Relay/ACR), with knobs
- 1 x EGIS XD Series Triple module (Switch/ACR/Switch), with knobs
- 1 x EGIS XD Series Dual module (ACR/Relay), with knobs
- Link / crossover busbars to interconnect all three modules
- Protective terminal covers for each module
- Stainless steel terminal hardware (self-locking flanged nuts)
- Deutsch mating connectors and dip-switch configuration guides
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Electrical
| Total Continuous Current | 500 A per circuit |
| Max Cranking Current | 1500 A |
| Voltage Range | 8-36 V DC |
| Off-State Current Draw | 1.3 mA |
| State Change Current | 5A @ 12V DC / 3A @ 24V DC |
Mechanical
| Mechanical Switching Life | 1,000,000 cycles |
| Connector | Deutsch DTM |
| Configuration | Kit: Dual (Relay/ACR) + Triple (Switch/ACR/Switch) + Dual (ACR/Relay) with link busbars |
| Ingress Protection | IP67 / IP6K9K |
No videos available for this product.
