EGIS
EGIS XD - Kit Dual + Triple Flex 2 (Relay/ACR)(Relay/ACR/Relay) w | 8850-6530-2535B
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The EGIS XD Series Dual + Triple Battery-Switch Kit is a pre-configured bundle that pairs a two-circuit Dual module (Relay/ACR) with a three-circuit Triple module configured Switch/ACR/Switch, giving five independent 500A circuits for a larger multi-bank electrical system. The dual module switches a load and shares charge through an automatic charging relay, while the triple module places a second automatic charging relay between two electronic battery-disconnect switches, replacing traditional mechanical battery switches for the main banks. The supplied link busbars join the units directly. Every circuit is rated 500A continuous and 1500A maximum cranking across an 8 to 36 V DC range.
Both modules share the proven XD construction: sealed to IP67 and IP6K9K, high-temperature electronics, integrated Gortex vents and stainless steel cable-lug studs that accept 1/4-20 / M6 hardware. Each circuit is dip-switch programmable under its included protective cover, carries a three-position manual override knob and reports status via front and remote LEDs, with off-state draw of just 1.3 mA. Deutsch connectors are pin-for-pin compatible with legacy ML Series bi-stable relays. Supplied as a bulk pack for OEM and trade installation.
PRODUCT DETAILS
- Pre-configured kit: one Dual (Relay/ACR) plus one Triple (Switch/ACR/Switch) module
- Five independent 500A circuits with two automatic charging relays
- Two electronic battery-disconnect switches replace mechanical battery switches
- Includes link busbars to join the modules without separate cable runs
- Three-position manual override knob on every circuit
- Sealed to IP67 / IP6K9K with integrated Gortex vents and 1.3 mA off-state draw
- Supplied bulk packed for OEM and trade installation
- 1 x EGIS XD Series Dual module (Relay/ACR), with knobs
- 1 x EGIS XD Series Triple module (Switch/ACR/Switch), with knobs
- Link / crossover busbars to interconnect the modules
- Protective terminal covers for each module
- Stainless steel terminal hardware (self-locking flanged nuts)
- Deutsch mating connectors and dip-switch configuration guides
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Electrical
| Total Continuous Current | 500 A per circuit |
| Max Cranking Current | 1500 A |
| Voltage Range | 8-36 V DC |
| Off-State Current Draw | 1.3 mA |
| State Change Current | 5A @ 12V DC / 3A @ 24V DC |
Mechanical
| Mechanical Switching Life | 1,000,000 cycles |
| Connector | Deutsch DTM |
| Configuration | Kit: Dual (Relay/ACR) + Triple (Switch/ACR/Switch) with link busbars |
| Ingress Protection | IP67 / IP6K9K |
No videos available for this product.
