EGIS
EGIS XD - Kit Triple + Dual Flex 2 (Relay/ACR/Relay)(ACR/Relay) w | 8850-2535-6350B
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The EGIS XD Series Triple + Dual Kit is a pre-configured bundle that pairs a three-circuit Triple module (configured Switch/ACR/Switch) with a two-circuit Dual module (configured ACR/Relay), giving five independent 500A circuits for a larger multi-bank electrical system. The triple module places an automatic charging relay between two electronic battery-disconnect switches, while the dual module adds a second automatic charging relay alongside a switched relay, so the kit can isolate banks, share charge in two places and switch loads from one knob-equipped assembly. The supplied link busbars join the units directly. Every circuit is rated 500A continuous and 1500A maximum cranking across an 8 to 36 V DC range.
Both modules share the proven XD construction: sealed to IP67 and IP6K9K, high-temperature electronics, integrated Gortex vents and stainless steel cable-lug studs that accept 1/4-20 / M6 hardware. Each circuit is dip-switch programmable under its included protective cover, carries a three-position manual override knob and reports status via front and remote LEDs, with off-state draw of just 1.3 mA. Deutsch connectors are pin-for-pin compatible with legacy ML Series bi-stable relays. Supplied as a bulk pack for OEM and trade installation.
PRODUCT DETAILS
- Pre-configured kit: one Triple (Switch/ACR/Switch) plus one Dual (ACR/Relay) module
- Five independent 500A circuits with two automatic charging relays
- Two electronic battery-disconnect switches on the triple module
- Includes link busbars to join the modules without separate cable runs
- Three-position manual override knob on every circuit
- Sealed to IP67 / IP6K9K with integrated Gortex vents and 1.3 mA off-state draw
- Supplied bulk packed for OEM and trade installation
- 1 x EGIS XD Series Triple module (Switch/ACR/Switch), with knobs
- 1 x EGIS XD Series Dual module (ACR/Relay), with knobs
- Link / crossover busbars to interconnect the modules
- Protective terminal covers for each module
- Stainless steel terminal hardware (self-locking flanged nuts)
- Deutsch mating connectors and dip-switch configuration guides
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Electrical
| Total Continuous Current | 500 A per circuit |
| Max Cranking Current | 1500 A |
| Voltage Range | 8-36 V DC |
| Off-State Current Draw | 1.3 mA |
| State Change Current | 5A @ 12V DC / 3A @ 24V DC |
Mechanical
| Mechanical Switching Life | 1,000,000 cycles |
| Connector | Deutsch DTM |
| Configuration | Kit: Triple (Switch/ACR/Switch) + Dual (ACR/Relay) with link busbars |
| Ingress Protection | IP67 / IP6K9K |
No videos available for this product.
