EGIS
EGIS XD Series - Dual Flex 2 (Relay /Relay) w/Knobs - DTM Conn | 8820-1550
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
This dual-circuit XD Flex 2 module replaces two individual high-amp relays with a single compact unit, removing the external link cabling that adds cost and can vibrate loose, and giving clear, unambiguous awareness of how the manual controls have set each relay. Built on the XD bi-stable solenoid platform, each circuit switches 500 A continuously and up to 1,500 A cranking while the assembly draws just 1.3 mA in the off state. A front-facing LED reports relay status and is replicated on the optional remote LED, and the two-relay layout supports common dual-battery load switching and charge management in one device.
Each relay has its own three-position manual override knob to force it open or closed and lock the state. Connection is through a sealed Deutsch DTM connector that is pin-for-pin compatible with legacy ML Series bi-stable relays, easing replacement in existing installations. The case is sealed to IP67 and IP6K9K with high-temperature electronics, an integrated Gore-Tex vent and stainless steel studs, relay behaviour is configured through DIP switches under the protective cover, and the unit can be expanded with 8790 and 8791 link bars alongside other XD relays.
PRODUCT DETAILS
- Dual-circuit module replaces two high-amp relays and their external link cabling
- 500 A continuous and 1,500 A cranking per circuit with only 1.3 mA off-state draw
- Individual three-position manual override knobs lock each relay open or closed
- Sealed Deutsch DTM connector pin-for-pin compatible with legacy ML Series relays
- Front-facing LED status display with optional remote LED replication
- Sealed to IP67 and IP6K9K with integrated Gore-Tex vent and stainless steel hardware
- Expandable with 8790 and 8791 link bars and configurable via DIP switches
- XD dual-circuit Flex 2 relay / relay module with two three-position manual override knobs
- Protective terminal cover with circuit label recesses
- 40-circuit waterproof label sheet
- 18-8 stainless steel studs and self-locking flanged nuts
- Deutsch DTM connector interface (mating harness ordered separately)
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Electrical
| Continuous Current | 500 A |
| Max Cranking Current | 1,500 A |
| Voltage Range | 8-36 V DC |
| Off-State Current Draw | 1.3 mA |
| State Change Current | 5A at 12 Vdc / 3A at 24 Vdc |
| Relay Function | Dual relay / relay |
Mechanical
| Circuit Configuration | Dual circuit |
| Mechanical Switching Life | 1,000,000 cycles |
| Ingress Protection | IP67 / IP6K9K |
| Manual Override | Two three-position knobs (lockable) |
| Connector | Deutsch DTM sealed plug (ML Series compatible) |
| Mounting Hardware | 1/4-20 / M6 holes; 18-8 stainless steel studs, self-locking flanged nuts |
No videos available for this product.
No downloads available for this product.
