Mastervolt
Mastervolt Alpha 12/130 III Alternator & Charge Regulator Multi-Groove
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Mastervolt Alpha 12/130 III multigroove is a high-output 12 volt, 130 amp marine alternator fitted with a multigroove (poly-V) pulley to suit engines that use a ribbed serpentine belt. It charges starter and service batteries quickly and completely and powers every consumer on board, and is supplied as standard with the Alpha Pro III charge regulator for a fully temperature-controlled three-stage charge.
Like every Alpha alternator it is built for powerful charging even at low engine rpm, where a standard alternator would only reach its rated output at high speed. Forced cooling from the pulley fan keeps output high in temperatures above 40 degrees, so it performs well mounted close to the engine. Combined with a Battery Mate or battery isolator it can charge two or three separate battery banks at the same time.
PRODUCT DETAILS
- 12 V output rated at 130 A total charge current
- Multigroove (poly-V) pulley for ribbed serpentine belts
- Supplied as standard with the Alpha Pro III three-step charge regulator
- Fast, powerful charging even at low engine rpm
- Forced fan cooling maintains output above 40 degrees C
- Charges two or three battery banks via a Battery Mate or isolator
- Isolated operation for safe, flexible installation
- Multiple fixing points for customised alternator brackets
- Alpha 12/130 III multigroove alternator (12 V / 130 A)
- Alpha Pro III charge regulator
- Battery temperature sensor with 6 m cable
No compatible transducers listed for this product.
No compatible products found.
General specifications
| Charge regulation | an Alpha Pro III regulator comes standard with all models |
| Total charge current | 130 A |
| Belt section | 2xA |
| Isolated operation | yes |
| Rotational direction | 2 |
| Mounting | six o clock |
| Dimensions | see Downloads for drawings |
| Weight | 10.1 kg (22.3 lb) |
Technical specifications
| Charge voltage Absorption | 14.25 V |
| Charge voltage Float | 13.25 V |
| Nominal diameter pulley | 89 mm (3.5 inch) |
No videos available for this product.
- Charge characteristics for Mastervolt alternators (datasheet)
- Dimension drawings 12/130, 24/75 and 24/110 (zipped DWG, PDF, EPS)
- User and installation manual Mastervolt alternators
- User and installation manual Alpha Pro regulator
- Mastervolt alternators and brackets (product notification)
- 3D drawing Alpha Alternator 12/130 multigroove (zipped STEP)

