Victron
Victron Orion IP67 24/12-5 DC-DC Converter
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Orion IP67 24/12-5 is a fully encapsulated 24V to 12V DC-DC converter for harsh and exposed installations. The casing is cast aluminium and the electronics are moulded in resin, making the unit waterproof, shockproof and ignition protected, so water, oil and dirt will not damage it. It supplies a stable 12V output of up to 5A from a 24V battery system.
A wide 15 to 40V input range keeps the output stable during the voltage surges and sags caused by other equipment on the same battery, and the converter is protected against overheating for use in hot environments such as a machine room. Input and output cables of 1.8m are fitted, which in most cases removes the need for intermediate cable joints in an area where an IP67 rating is required. The unit is short-circuit proof, recovers automatically from an overload through hiccup mode, and is protected against reverse polarity with an external fuse or circuit breaker.
The Orion IP67 supplies a fixed output voltage and is intended as a converter rather than a battery charger. It has no charge algorithm and no Bluetooth. For controlled multi-stage battery charging from a DC source, use an Orion-Tr Smart DC-DC charger instead.
PRODUCT DETAILS
- Fully encapsulated 24V to 12V DC-DC converter, fixed 12V output up to 5A
- Waterproof, shockproof and ignition protected, IP67 rated
- Cast aluminium casing with electronics moulded in resin
- Wide 15-40V input range for a stable output during surges and sags
- 1.8m input and output cables fitted as standard
- Protected against overheating, short circuit and overload (hiccup mode)
- Reverse polarity protection with external fuse or circuit breaker
- Converter with fixed output, not a battery charger
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| Input voltage range | 15-40 VDC |
| Output voltage (nominal) | 12 V +/- 3 % |
| Continuous output current | 5 A |
| Galvanic isolation | Non-isolated |
| Bluetooth | No |
| Protection category | IP67 |
Input
| Input voltage range | 15-40 VDC |
| Under voltage shutdown | 13 V |
| Under voltage restart | 14 V |
| No load current at 24V | 1 mA |
Output
| DC output voltage | 12 V +/- 3 % |
| Maximum continuous output current | 5 A |
| Efficiency | 93 % |
| Ripple and noise | 75 mVpp |
General
| Overload protection | Hiccup mode, recovers automatically after the fault condition is removed |
| Short circuit proof | Yes |
| Reverse polarity protection | With external fuse or circuit breaker (not included) |
Environmental
| Operating temperature range | -40 to +70 C (full rated output up to 40 C, derate 3 % per C above 40 C) |
| Protection category | IP67 |
Physical
| Material and colour | Aluminium (blue RAL 5012) |
| DC connection | Two input and two output cables, length 1.8 m |
| Cable cross section, input | 0.8 mm2 (18 AWG) |
| Cable cross section, output | 0.8 mm2 (18 AWG) |
| Weight | 50 g |
| Dimensions (h x w x d) | 25 x 43 x 20 mm |
Conformance
| Safety | EN 60950 |
| Emission | EN 61000-6-3, EN 55014-1 |
| Immunity | EN 55014-2, EN 61000-6-1, EN 61000-6-2 |
| Vibration | IEC 68-2-6: 10-150 Hz / 1.0 G |
No videos available for this product.
