Raymarine Yamaha Command Link Product to NMEA 2000 Network Adapter Cable

Enquire
£158.40 inc VAT
£132.00 ex VAT

Manufacturer Part Number:

A80055

Yamaha Command Link Product to NMEA 2000 Network Adapter Cable

Home or Marina Delivery

Get it as soon as tomorrow
Enter postcode to check

Pick up at Hamble

Pick it up today

More Information

Raymarine ECI-100 Engine and Control Interface

Raymarine ECI-100 Engine and Control Interface

£318.76 inc VAT

Engine data that can be displayed

Using the ECI-100, it's possible to connect selected Yamaha outboard engine systems.

By doing so it is possible to display the following engine data on a connected Raymarine multifunction display.

  • Engine Speed (RPM)
  • Engine Hours
  • Engine Coolant Temperature
  • Engine Oil Pressure
  • Engine Coolant Pressure
  • Engine Fuel Rate
  • Engine Boost Pressure
  • Gear Status
  • Battery Voltage
  • Transmission Oil Pressure
  • Transmission Oil Temperature
  • Fuel Level
  • Power Trim
  • Engine Alarms
    • Over Temperature
    • Low Oil Pressure
    • Low Oil Level
    • Low System Voltage
    • Low Fuel Pressure
    • Water In Fuel

Connecting your ECI-100

Connection of your ECI-100 to a compatible Yamaha engine system couldn't be simpler. Depending on the age and type of your engine, Raymarine have provided a simple single-cable solution:

For all new and recent Yamaha outboard engine systems, a multi-link hub should be available. This will have 6 connections. 1 of the device connections must be available in order to connect your ECI-100.

For this connection, you will need the Yamaha Link Cable (Raymarine Part Number: E70242). The Yamaha Link Cable is connected between the NMEA2000 (DeviceNet) connector of the ECI-100, and the available socket on the Yamaha Command-Link or Command-Link Plus hub.

For engine data only, the connection between ECI-100 and Yamaha outboard engine system is identical (as shown in the diagram below) but fitting the Raymarine EV-2 is not required.

EV-2 is connected to the Raymarine backbone via a SeaTalkng spur cable (white SeaTalkng plug on EV-2 to be used).

Diagram

1. SeaTalkng spur cable between the SeaTalkng backbone and the EV2's SeaTalkng connector.

2. ECI-100 unit

3. STng network power supply (12 V dc)

4. EV-2 - Evolution™ autopilot

5. Raymarine Yamaha Link Cable (E70242)

6. Yamaha outboard engine system bus

7. Yamaha Command-Link or Command-Link Plus Hub

Compatible Yamaha Outboard Engine Systems

These Yamaha outboard engine systems have the ability to display engine data on Raymarine’s latest generation of multifunction displays using the ECI-100.

Shown below are Yamaha engines which may have a compatible Yamaha electronic control system fitted.

Important: Not all engines have a Command-Link or Command-Link Plus system fitted as standard. Please check with your local engine dealer to ensure that you have a compatible system fitted to your boat before proceeding.

Engine Control and Interfacing Navigation