Victron
Victron SmartSolar MPPT RS 450/100 Solar Charge Controller
£1,281.60
/
Tax included.
SCC145110512
The SmartSolar MPPT RS 450/100 is a 48 V solar charge controller delivering up to 100 A and 5.8 kW of charge power, with up to 450 V PV input and two independent MPPT trackers. It features isolated PV connections, a display and Bluetooth.
✓
Collection or delivery in 1-2 weeks
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The SmartSolar MPPT RS 450/100 is Victron's solution for systems with large series-connected PV arrays charging a 48 V battery bank, in both off-grid and on-grid applications where maximum charging power is required. It accepts up to 450 V DC of PV input across a wide 65 to 450 V MPPT operating range, with two independent MPPT trackers so the array can be split and optimised for the site and shading.
Full galvanic isolation between the PV and battery connections adds system safety, and the unit continuously monitors PV array isolation resistance, flagging a fault if it drops to unsafe levels. High-frequency design keeps the 100 A model light at 7.9 kg while delivering up to 5.8 kW of charge power and quiet, efficient operation. Charging is fully programmable for lead-acid, lithium and other chemistries, and a battery temperature sensor is included.
A front-panel display reads battery and tracker data, while built-in Bluetooth, VE.Direct and VE.Can ports allow set-up and monitoring with VictronConnect and a GX device. Up to 25 units can be connected in parallel over VE.Can, with remote monitoring through the VRM portal.
PRODUCT DETAILS
- 48 V charge controller delivering up to 100 A (5.8 kW at 57.6 V)
- Up to 450 V PV input with a wide 65 to 450 V MPPT range
- Two independent MPPT trackers for flexible array design
- Isolated PV connections with continuous isolation monitoring
- Built-in display plus Bluetooth, VE.Direct and VE.Can ports
- Up to 25 units in parallel over VE.Can
- Fully programmable for lead-acid, lithium and other chemistries
- Light, efficient, fan-cooled high-frequency design (7.9 kg)
- SmartSolar MPPT RS 450/100 charge controller
- Battery temperature sensor
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| Battery voltage | 48 V |
| Maximum PV open circuit voltage | 450 |
| Rated charge current | 100 |
| Maximum charge power | 5.8 kW at 57.6 V |
| Nominal PV power, 48V | 5760 |
| Number of MPPT trackers | 2 |
| Maximum DC output charging power | 4000 W per tracker, 5760 W total |
| Maximum PV array size per tracker | 7200 Wp (450 V x 20 A) |
| Maximum efficiency | 96 |
| MPPT operating voltage range | 65 - 450 V (constrained by battery voltage; PV Voc should not exceed 8 x battery float voltage) |
| PV start-up voltage | 120 V |
| Maximum PV operational input current | 16 A per tracker |
| Maximum PV short circuit current | 20 A per tracker |
Charging
| Charge voltage 'absorption' | Default 57.6 V (adjustable) |
| Charge voltage 'float' | Default 55.2 V (adjustable) |
| Programmable voltage range | Minimum 36 V, maximum 60 V |
| Charge algorithm | Multi-stage adaptive (adjustable) |
| Self-consumption | 15 mA |
| Battery temperature sensor | Included |
Connectivity & control
| Bluetooth | Built-in Bluetooth Smart (2402 - 2480 MHz, 4 dBm) |
| Data communication port | VE.Direct port, VE.Can port and Bluetooth |
| General purpose analogue/digital input | Yes, 2x |
| Remote on/off | Yes |
| Programmable relay | Yes (general alarm, DC under voltage or genset start/stop). DC rating 4 A up to 35 VDC, 1 A up to 70 VDC |
| Parallel operation | Yes, up to 25 units synchronised via VE.Can |
Protection
| Protection | PV reverse polarity; output short circuit; over temperature |
| PV isolation fail level | 100 kOhm (continuous PV array isolation resistance monitoring) |
Environmental
| Operating temperature | -40 to +60 (fan assisted cooling) |
| Humidity | max 95 %, non-condensing |
Physical
| Colour | Steel, blue RAL 5012 |
| Power terminals | PV input: 1 pair of male and female MC4 connectors per tracker; battery 2x M8 bolts (1x positive, 1x negative) |
| Protection category | IP21 |
| Weight | 7.9 |
| Dimensions (h x w x d) | 440 x 313 x 126 |
Conformance
| Safety | EN-IEC 62109-1 |
| Country of origin | Designed in The Netherlands, made in India |
No downloads available for this product.
What battery system does the SmartSolar MPPT RS charge?
It is a 48 V charge controller designed for systems with large series-connected PV arrays charging 48 V battery banks, in both off-grid and on-grid applications.
What PV voltage and how many trackers does it have?
It accepts up to 450 V DC PV input with a 65 to 450 V MPPT operating range and a 120 V start-up voltage. The 450/100 has two independent MPPT trackers and the 450/200 has four, each handling up to 4000 W.
Why are the PV connections isolated?
The MPPT RS provides full galvanic isolation between the PV and battery connections for additional system safety, and it continuously monitors the PV array isolation resistance, reporting a fault if it falls below 100 kOhm.
How do I monitor and connect additional units?
Built-in Bluetooth, VE.Direct and VE.Can ports allow configuration and monitoring with VictronConnect and a GX device. Up to 25 units can be connected in parallel over VE.Can to synchronise their charging, with remote monitoring available through the VRM portal.
Which battery types are supported?
The charge settings are fully programmable for different battery chemistries, including lead-acid and lithium, and a battery temperature sensor is included.
