Victron
Victron MultiPlus Compact 12/1600/70 with DEFA 1m Cable
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
This Victron Phoenix package pairs a pure sine wave inverter with a built-in 70A mains battery charger, making it a MultiPlus Compact 12/1600/70 combined inverter and charger with an automatic transfer switch. On shore power it charges the batteries and passes mains through to your sockets; once disconnected it inverts the 12V battery bank back to clean 230V, switching over fast enough to keep equipment running without interruption.
Supplied by Hudson Marine ready-fitted with a one-metre DEFA extension cable, it drops straight into a DEFA based shore-power or interior-heater installation with no extra wiring. The unit delivers 1300W continuous (1600VA) with a 3000W surge, a high-output adaptive four-stage charger that maintains the house battery and trickle-charges a starter battery, and a VE.Bus port for remote control and monitoring. PowerControl and PowerAssist let it share or boost a limited shore supply.
PRODUCT DETAILS
- Pure sine wave inverter with a built-in 70A mains battery charger (MultiPlus combo)
- Supplied with a DEFA one-metre extension cable pre-connected
- 1300W continuous (1600VA) with a 3000W peak for start-up surges
- Built-in automatic transfer switch with PowerControl and PowerAssist
- High-output adaptive four-stage charger with battery temperature sensor and starter-battery trickle output
- VE.Bus communication port for remote on/off, monitoring and system integration
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 12 V |
| Continuous output power | 1600 VA |
| Continuous output power at 25°C | 1300 W |
| Peak power | 3000 W |
| Maximum charge current | 70 A |
| Transfer switch | 16 A |
Inverter
| DC input voltage range | 9.5 to 17 V |
| Output voltage / frequency | 230 VAC +/-2%, 50 Hz +/-0.1% |
| Cont. output power at 25°C (VA) | 1600 VA |
| Cont. output power at 25°C (W) | 1300 W |
| Cont. output power at 40°C (W) | 1200 W |
| Cont. output power at 65°C (W) | 800 W |
| Peak power | 3000 W |
| Maximum efficiency | 92 % |
| Zero load power | 8 W |
| Zero load power in AES mode | 3 W |
Charger
| Charge voltage 'absorption' | 14.4 V |
| Charge voltage 'float' | 13.8 V |
| Storage mode | 13.2 V |
| Maximum charge current | 70 A |
| Charge current starter battery | 1 A |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | For parallel and three phase operation, remote monitoring and system integration |
| Programmable relay | Yes (general alarm, DC under voltage or genset start/stop; AC rating 230 V/4 A) |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65 °C (fan assisted cooling) |
| Humidity (non-condensing) | Max. 95 % |
Physical
| Material & colour | Steel / ABS, blue RAL 5012 |
| Protection category | IP21 |
| Battery connection | 50 mm² |
| 230 VAC connection | G-ST18i connector |
| Weight | 10.2 kg |
| Dimensions (h x w x d) | 470 x 265 x 120 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
| Automotive Directive | ECE R10-5 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
