Victron
Victron MultiPlus Compact 24/1600/40
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus Compact 24/1600/40 combines a 1600 VA pure sine wave inverter, a 40 A adaptive battery charger and a high-speed AC transfer switch in one compact metal enclosure. Running from a 24 V battery bank, it is built for marine, mobile and off-grid installations that need dependable mains-quality power and capable charging from a single unit.
When shore or generator power fails, the integrated transfer switch hands the load to the inverter in less than 20 milliseconds, so computers and sensitive electronics keep running without interruption. PowerControl lets you cap the current drawn from a limited shore or generator supply, while PowerAssist boosts that supply with battery power during short peaks, then recharges once demand falls.
Adaptive multi-stage charging with a battery temperature sensor looks after the house bank, and a separate trickle output keeps a starter battery topped up. Settings change in minutes using DIP switches, and up to six units can be paralleled or configured for three-phase output as systems grow.
PRODUCT DETAILS
- 1600 VA pure sine wave inverter with a 40 A adaptive battery charger
- High-speed AC transfer switch changes over in under 20 milliseconds
- Runs from a 24 V battery bank
- PowerControl limits the current drawn from shore or generator supplies
- PowerAssist tops up a limited supply from the battery during peaks
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 24 V |
| Continuous output power | 1600 VA |
| Continuous output power at 25°C | 1300 W |
| Peak power | 3000 W |
| Maximum charge current | 40 A |
| Transfer switch | 16 A |
AC inputs
| AC input voltage range | 187-265 VAC |
| AC input frequency | 45-65 Hz |
Inverter
| DC input voltage range | 19-33 V |
| Output voltage / frequency | 230 VAC, 50 Hz |
| Cont. output power at 40°C (W) | 1200 W |
| Cont. output power at 65°C (W) | 800 W |
| Peak power | 3000 W |
| Maximum efficiency | 94 % |
Charger
| Charge voltage 'absorption' | 28.8 V |
| Charge voltage 'float' | 27.6 V |
| Storage mode | 26.4 V |
| Charge current house battery | 40 A |
| Charge current starter battery | 4 A |
| Battery temperature sensor | Yes |
Connectivity & control
| Programmable relay | Yes |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high or too low, temperature too high, AC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C |
| Humidity (non-condensing) | Max 95% |
| Maximum altitude | 2000 m |
Physical
| Material & colour | Aluminium, blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | Battery cables of 1.5 metre |
| 230 VAC connection | G-ST18i connector |
| Weight | 10 kg |
| Dimensions (h x w x d) | 375 x 214 x 110 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
