Victron
Victron MultiPlus 24/3000/70
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus 24/3000/70 combines a 3000 VA pure sine wave inverter, a 70 A adaptive battery charger and a high-speed AC transfer switch in one enclosure. Running from a 24 V battery bank, it is built for demanding marine, mobile and off-grid systems that need substantial mains-quality power and dependable charging from a single unit.
When shore or generator power is lost, the main output transfers to the inverter in less than 20 milliseconds, so computers and sensitive electronics keep running uninterrupted. PowerControl caps the current drawn from a limited shore or generator supply, while PowerAssist supplements that supply with battery power during peaks, then recharges once demand falls. A programmable auxiliary output can shed loads that should not drain the battery when no AC is present.
Adaptive multi-stage charging with a temperature sensor cares for the house bank, and a separate trickle output keeps a starter battery topped up. Up to six units can be paralleled, or three configured for three-phase output, with monitoring and control via a GX device, control panel or the VictronConnect app.
PRODUCT DETAILS
- 3000 VA pure sine wave inverter with a 70 A adaptive battery charger
- High-speed AC transfer switch changes over in under 20 milliseconds
- Runs from a 24 V battery bank
- PowerControl and PowerAssist manage limited shore or generator power
- Parallel and three-phase capable, with VE.Bus monitoring and control
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 24 V |
| Continuous output power | 3000 VA |
| Continuous output power at 25°C | 2400 W |
| Peak power | 6000 W |
| Maximum charge current | 70 A |
| Transfer switch | 16 A or 50 A |
AC inputs
| AC input voltage range | 187-265 VAC |
| AC input frequency | 45-65 Hz |
Inverter
| DC input voltage range | 19-33 V |
| Output voltage / frequency | 230 VAC, 50 Hz |
| Cont. output power at 40°C (W) | 2200 W |
| Cont. output power at 65°C (W) | 1700 W |
| Peak power | 6000 W |
| Maximum efficiency | 94 % |
| Maximum continuous output current | 11 A |
Charger
| Charge voltage 'absorption' | 28.8 V |
| Charge voltage 'float' | 27.6 V |
| Storage mode | 26.4 V |
| Charge current house battery | 70 A |
| Charge current starter battery | 4 A |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes |
| General purpose comms port | Yes |
| Programmable relay | Yes |
| Auxiliary output | 16 A |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high or too low, temperature too high, AC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C |
| Humidity (non-condensing) | Max 95% |
| Maximum altitude | 2000 m |
Physical
| Material & colour | Aluminium, blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | M8 bolts |
| 230 VAC connection | Screw terminals 13 mm² (6 AWG) |
| Weight | 18 kg |
| Dimensions (h x w x d) | 364 x 295 x 221 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
