Victron
Victron MultiPlus Compact 48/500/6
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus Compact 48/500/6 combines a pure sine wave inverter, an adaptive battery charger and a high-speed AC transfer switch in one compact 48 V enclosure. When mains or generator power fails it takes over the supply seamlessly, so sensitive electronics keep running without interruption.
Built for marine, mobile and off-grid 48 V systems, it delivers 500 VA of clean 230 V output and recharges the battery bank through Victron's four-stage adaptive charge process. A built-in transfer switch and programmable relay make it simple to integrate into a wider Victron installation.
This model is from Victron's discontinued MultiPlus Compact range and remains a proven choice for smaller 48 V auxiliary and back-up duties.
PRODUCT DETAILS
- Pure sine wave inverter, charger and transfer switch in one compact unit
- 500 VA continuous output at 25°C with 900 W peak power
- Four-stage adaptive charger rated at 6 A for 48 V banks
- High-speed transfer switch keeps loads running during a power failure
- Programmable relay and battery temperature sensor for flexible installation
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 48 V |
| Continuous output power | 500 VA |
| Continuous output power at 25°C | 430 W |
| Peak power | 900 W |
| Maximum charge current | 6 A |
| Transfer switch | 16 A |
AC inputs
| AC input voltage range | 187 - 265 VAC |
| AC input frequency | 45 - 65 Hz |
Inverter
| DC input voltage range | 38 - 66 V |
| Output voltage / frequency | 230 VAC ±2%, 50 Hz ±0.1% |
| Cont. output power at 40°C (W) | 400 W |
| Cont. output power at 65°C (W) | 300 W |
| Peak power | 900 W |
| Maximum efficiency | 92% |
| Zero load power | 7 W |
| Zero load power in Search mode | 3 W |
Charger
| Charge voltage 'absorption' | 57.6 V |
| Charge voltage 'float' | 55.2 V |
| Storage mode | 52.8 V |
| Maximum charge current | 6 A |
| Charge curve | 4-stage adaptive |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes (RJ45 splitter ASS030065510 needed for 500/800/1200 VA models) |
| Programmable relay | Yes |
| Remote on/off | On / off / charger only |
Protection
| Protection | Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C (fan assisted cooling) |
| Humidity (non-condensing) | Max 95% |
Physical
| Material & colour | Steel / ABS, blue RAL 5012 |
| Protection category | IP21 |
| Battery connection | 16/10/10 mm² (12/24/48 V) |
| 230 VAC connection | G-ST18i connector |
| Weight | 4.4 kg |
| Dimensions (h x w x d) | 311 x 182 x 100 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
