Victron
Victron MultiPlus Compact 12/800/35
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus Compact 12/800/35 brings together a pure sine wave inverter, an adaptive battery charger and a high-speed AC transfer switch in one compact 12 V enclosure. When shore or generator power fails it takes over the supply seamlessly, so sensitive electronics keep running without interruption.
Designed for marine, mobile and off-grid 12 V systems, it provides 800 VA of clean 230 V output and recharges the battery bank with a powerful 35 A four-stage adaptive charger, plus a 4 A trickle charge for a starter battery. PowerControl and PowerAssist let it share a limited shore or generator supply, drawing on the battery only when extra power is needed.
This unit is part of Victron's discontinued MultiPlus Compact range and remains well suited to compact 12 V back-up and auxiliary power duties.
PRODUCT DETAILS
- Pure sine wave inverter, charger and transfer switch in one compact unit
- 800 VA continuous output at 25°C with 1600 W peak power
- 35 A four-stage adaptive charger plus 4 A starter-battery charge
- PowerControl and PowerAssist manage a limited shore or generator supply
- High-speed transfer switch keeps loads running during a power failure
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 12 V |
| Continuous output power | 800 VA |
| Continuous output power at 25°C | 700 W |
| Peak power | 1600 W |
| Maximum charge current | 35 A |
| Transfer switch | 16 A |
AC inputs
| AC input voltage range | 187 - 265 VAC |
| AC input frequency | 45 - 65 Hz |
Inverter
| DC input voltage range | 9.5 - 17 V |
| Output voltage / frequency | 230 VAC, 50 Hz ±0.1% |
| Cont. output power at 40°C (W) | 650 W |
| Cont. output power at 65°C (W) | 400 W |
| Peak power | 1600 W |
| Maximum efficiency | 92% |
| Zero load power | 8 W |
| Zero load power in Search mode | 2 W |
| Zero load power in AES mode | 5 W |
Charger
| Charge voltage 'absorption' | 14.4 V |
| Charge voltage 'float' | 13.8 V |
| Storage mode | 13.2 V |
| Charge current house battery | 35 A |
| Charge current starter battery | 4 A |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes (parallel and three phase operation, remote monitoring and system integration) |
| Programmable relay | Yes |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, 230 VAC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C (fan assisted cooling) |
| Humidity (non-condensing) | Max 95% |
| Maximum altitude | 2000 m |
Physical
| Material & colour | Aluminium, blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | Battery cables of 1.5 metre |
| 230 VAC connection | G-ST18i connector |
| Weight | 10 kg |
| Dimensions (h x w x d) | 375 x 214 x 110 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
