Victron
Victron MultiPlus 24/500/10
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus 24/500/10 brings together a 500 VA pure sine wave inverter, a 10 A adaptive battery charger and a high-speed AC transfer switch in one compact enclosure. Running from a 24 V battery bank, it is a tidy single-box solution for smaller marine, mobile and off-grid installations that need clean mains-quality power and reliable charging.
When shore or generator power is lost, the integrated transfer switch passes the load to the inverter in less than 20 milliseconds, so computers and other sensitive electronics keep running without interruption. The adaptive multi-stage charger maintains the house battery with the help of a temperature sensor, and a separate trickle output keeps a starter battery topped up.
Settings are changed in minutes with DIP switches, and the unit can be paralleled or configured for three-phase output as a system grows. It integrates with a Multi Control panel, a VE.Bus Smart Dongle or the VictronConnect app for monitoring and control.
PRODUCT DETAILS
- 500 VA pure sine wave inverter with a 10 A adaptive battery charger
- High-speed AC transfer switch changes over in under 20 milliseconds
- Runs from a 24 V battery bank
- Adaptive multi-stage charging with a battery temperature sensor
- Separate 1 A trickle output for a starter battery
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 24 V |
| Continuous output power | 500 VA |
| Continuous output power at 25°C | 430 W |
| Peak power | 900 W |
| Maximum charge current | 10 A |
| Transfer switch | 16 A |
AC inputs
| AC input voltage range | 187-265 VAC |
| AC input frequency | 45-65 Hz |
Inverter
| DC input voltage range | 19-33 V |
| Output voltage / frequency | 230 VAC, 50 Hz |
| Cont. output power at 40°C (W) | 400 W |
| Cont. output power at 65°C (W) | 300 W |
| Peak power | 900 W |
| Maximum efficiency | 91 % |
Charger
| Charge voltage 'absorption' | 28.8 V |
| Charge voltage 'float' | 27.6 V |
| Storage mode | 26.4 V |
| Charge current house battery | 10 A |
| Charge current starter battery | 1 A |
| Battery temperature sensor | Yes |
Connectivity & control
| Programmable relay | Yes |
| Remote on/off | On / off / charger only |
Protection
| Protection | Output short circuit, overload, battery voltage too high or too low, temperature too high, AC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C |
| Humidity (non-condensing) | Max 95% |
Physical
| Material & colour | Steel / ABS, blue RAL 5012 |
| Protection category | IP21 |
| Battery connection | 10 mm² |
| 230 VAC connection | G-ST18i connector |
| Weight | 4.4 kg |
| Dimensions (h x w x d) | 311 x 182 x 100 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
