Victron
Victron SmartSolar MPPT 250/60 Solar Charge Controller
£480.00
/
Tax included.
SCC125060321
The SmartSolar MPPT 250/60 is a 60 A solar charge controller for 12/24/48 V battery banks, accepting up to 250 V PV input with built-in Bluetooth. This model uses MC4 PV connectors and reaches up to 99% efficiency.
✓
Collection or delivery in 1-2 weeks
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron SmartSolar MPPT 250/60 is a high-voltage solar charge controller that gathers energy from a PV array and stores it efficiently in a 12, 24 or 48 V battery bank, automatically detecting the system voltage on connection. Its ultra-fast Maximum Power Point Tracking continuously follows the optimum operating point of the array, improving energy harvest in changing light and partial shading conditions where conventional controllers can settle on a lower power point.
Built-in Bluetooth Smart allows the controller to be set up, monitored and updated from a phone or tablet using the free VictronConnect app, while a VE.Direct port provides a wired link to a GX device and the VRM portal for remote monitoring. A fully programmable, multi-stage adaptive charge algorithm, optional external battery sensing and a programmable relay let the unit be tuned to the battery and the installation.
Rated at 60 A of charge current, this model uses two pairs of MC4 connectors for the PV array and accepts up to 250 V of PV open circuit voltage, suiting larger series-connected arrays on marine, vehicle and off-grid systems. Extensive electronic protection covers PV reverse polarity, output short circuit and over-temperature operation.
PRODUCT DETAILS
- Ultra-fast Maximum Power Point Tracking for higher solar yield
- 60 A rated charge current for 12, 24 or 48 V battery banks (auto select)
- Accepts up to 250 V PV open circuit voltage
- Maximum efficiency up to 99% with no cooling fan
- Built-in Bluetooth Smart with the free VictronConnect app
- VE.Direct port for wired GX and VRM monitoring
- Two pairs of MC4 PV connectors
- Fully programmable multi-stage adaptive charge algorithm
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| Battery voltage | 12 / 24 / 48 V auto select (36 V selectable via software tool) |
| Maximum PV open circuit voltage | 250 V absolute maximum (coldest conditions); 245 V start-up and operating maximum |
| Rated charge current | 60 |
| Nominal PV power, 12V | 860 |
| Nominal PV power, 24V | 1720 |
| Nominal PV power, 48V | 3440 |
| Maximum PV short circuit current | 35 (maximum 30 per MC4 connector) |
| Maximum efficiency | 99 |
Charging
| Charge voltage 'absorption' | Default 14.4 / 28.8 / 43.2 / 57.6 V (adjustable) |
| Charge voltage 'float' | Default 13.8 / 27.6 / 41.4 / 55.2 V (adjustable) |
| Charge algorithm | Multi-stage adaptive (eight pre-programmed algorithms) or user defined |
| Temperature compensation | -16 / -32 / -64 mV/°C |
| Self-consumption | Less than 35 mA at 12 V / 20 mA at 48 V |
| Automatic battery voltage recognition | Yes, 12 / 24 / 48 V auto select |
Connectivity & control
| Bluetooth | Built-in Bluetooth Smart |
| Data communication port | VE.Direct or Bluetooth |
| Battery voltage/temperature sensing | Internal sensor; optional external sensing via Bluetooth (Smart Battery Sense, BMV-712 or SmartShunt) |
| Remote on/off | Yes (2 pole connector) |
| Programmable relay | DPST. AC rating 240 VAC / 4 A; DC rating 4 A up to 35 VDC, 1 A up to 60 VDC |
| Parallel operation | Yes, up to 10 units synchronised via Bluetooth |
Protection
| Protection | PV reverse polarity; output short circuit; over temperature |
Environmental
| Operating temperature | -30 to +60 (full rated output up to 40) |
| Humidity | 95 %, non-condensing |
Physical
| Colour | Blue (RAL 5012) |
| Power terminals | PV: two pairs of MC4 connectors (max 30 A per connector); battery 35 mm2 / AWG2 |
| Protection category | IP43 (electronic components), IP22 (connection area) |
| Weight | 3 |
| Dimensions (h x w x d) | 215 x 250 x 95 |
Conformance
| Safety | EN/IEC 62109-1, UL 1741, CSA C22.2 |
No downloads available for this product.
What battery voltages does this charge controller support?
It automatically selects between 12, 24 and 48 V battery systems. A 36 V system can also be selected using the VictronConnect software tool.
What is the maximum PV array voltage I can connect?
The maximum PV open circuit voltage is 250 V in the coldest conditions, with a 245 V start-up and operating maximum. The PV voltage must exceed the battery voltage plus 5 V for the controller to start.
How do I monitor and configure the controller?
Built-in Bluetooth Smart lets you set up, monitor and update the controller from a smartphone or tablet using the free VictronConnect app. A wired VE.Direct connection to a GX device is also supported, and a pluggable SmartSolar LCD display is available as an option.
Can I run several units together?
Yes. Up to 10 units can be synchronised over Bluetooth so they share charge stages when charging the same battery bank.
Can the controller read the actual battery voltage and temperature?
It has an internal temperature sensor, and optional external battery voltage and temperature sensing is available over Bluetooth using a Smart Battery Sense, a BMV-712 Smart Battery Monitor or a SmartShunt.
