Victron

Victron SMART BlueSolar Charge Controller - 75/10A

£68.40
Tax included.
SCC075010060R
The Victron SmartSolar MPPT 75/10 is a compact 10 A solar charge controller for 12 V and 24 V battery systems, with built-in Bluetooth for setup and monitoring through the VictronConnect app. Its ultra-fast maximum power point tracking extracts up to 30 percent more energy than PWM controllers, while an intelligent load output and adaptive charging protect your batteries.
✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The SmartSolar MPPT 75/10 is Victron's entry-level smart solar charge controller, sized for smaller 12 V and 24 V installations on boats, campers and off-grid systems. It accepts a PV array of up to 75 V open circuit and delivers up to 10 A of charge current, using an ultra-fast tracking algorithm that keeps the panel working at its optimum point even as light levels change. Integrated Bluetooth lets you configure the charger, monitor performance and update firmware directly from a phone or tablet.

A multi-stage adaptive charge algorithm tailors the charge profile to lead-acid or lithium batteries, and the SafetyShield+ protection set guards against PV reverse polarity, short circuits and over-temperature. The load output can power small DC loads while preventing deep discharge, and a VE.Direct port allows the controller to be integrated into a wider Victron monitoring system.

PRODUCT DETAILS

  • Ultra-fast maximum power point tracking for up to 30 percent more harvest than PWM controllers
  • Built-in Bluetooth for setup, monitoring and firmware updates via VictronConnect
  • Rated 10 A charge current with automatic 12 V / 24 V battery voltage selection
  • Accepts PV arrays up to 75 V open circuit voltage
  • Multi-stage adaptive charge algorithm suits lead-acid and lithium batteries
  • Intelligent load output with BatteryLife to prevent deep discharge
  • SafetyShield+ protection: PV reverse polarity, short circuit and over-temperature
  • VE.Direct port and synchronised charging across multiple SmartSolar units
  • SmartSolar MPPT 75/10 charge controller
  • Manual

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Charging

Battery voltage (auto select)12 V or 24 V
Rated charge current10 A
Charge algorithmMulti-stage adaptive or user defined
Charge voltage absorption14.4 V / 28.8 V (adjustable)
Charge voltage float13.8 V / 27.6 V (adjustable)
Temperature compensation12 V: -16 mV/C / 24 V: -32 mV/C

Solar input

Maximum PV open circuit voltage75 V
Nominal PV power, 12 V145 W
Nominal PV power, 24 V290 W
Maximum PV short circuit current10 A

Electrical

Peak efficiency98 percent
Self-consumption12 V: 20 mA / 24 V: 10 mA
Continuous load current15 A

General

ProtectionPV reverse polarity, output short circuit, over temperature
Data communicationVE.Direct port
Operating temperature-30 C to +60 C (full rated output up to 40 C)

Physical

Power terminals6 mm2 / AWG10
Protection categoryIP43 (electronic components), IP22 (connection area)
Dimensions (h x w x d)100 x 113 x 40 mm
Weight0.5 kg

No downloads available for this product.

What does the 75/10 designation mean?
The first number is the maximum PV open circuit voltage the controller accepts (75 V) and the second is the maximum charge current it can deliver to the battery (10 A). So the 75/10 takes a solar array up to 75 V and charges at up to 10 A.
Which battery voltages does it support?
The SmartSolar MPPT 75/10 automatically detects and works with 12 V and 24 V battery banks. It supports lead-acid (AGM, gel, flooded) and lithium batteries through its adjustable, multi-stage adaptive charge algorithm.
Do I need extra hardware to set it up?
No. Bluetooth is built in, so you configure and monitor the controller directly from the free VictronConnect app on a phone or tablet. The VE.Direct port is available if you later want to connect it to a GX device or VRM for remote monitoring.
Why does Victron recommend an MPPT over a PWM controller?
Ultra-fast maximum power point tracking keeps the panel operating at its most efficient point, improving energy harvest by up to 30 percent compared with PWM controllers, and by up to 10 percent compared with slower MPPT controllers, especially in changing light conditions.