Victron
Victron Transfer Switch 5kVA/230V
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron VE Transfer Switch 5kVA automates the changeover between two AC power sources: between a generator and shore power, between an inverter and a generator, or between an inverter and shore power. It has two inputs and one output, and automatically routes whichever source is available to the output.
Input 1 is normally the priority source (a generator or shore supply). If the voltage or frequency on input 1 drifts out of range, the transfer switch changes over to input 2 (typically the inverter). Once the input 1 supply has been continuously stable again, the switch returns to it after a delay of approximately 10 seconds. During the changeover the output briefly loses power, so it is intended for general loads rather than sensitive equipment that cannot tolerate a short interruption.
This model is rated at 5 kVA on a single-phase 200 to 250 V AC supply, making it suitable for marine and off-grid installations where a generator or shore feed is combined with an inverter.
PRODUCT DETAILS
- Automatic changeover between two AC sources (shore, generator or inverter)
- Two inputs and one output with automatic source selection
- Switches to the backup source if the priority source is out of range
- Returns to the priority source after about 10 seconds once it is stable
- Rated 5 kVA, single-phase 200 to 250 V AC
- Suited to marine and off-grid generator or shore plus inverter systems
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
No specifications available for this product.
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
