Kicker Audio KXM Marine 800W 8 Channel Full-Range Amplifier Kicker Audio KXM Marine 800W 8 Channel Full-Range Amplifier
Kicker Audio KXM Marine 800W 8 Channel Full-Range Amplifier
Discontinued

This product has been discontinued by Kicker Marine Audio and is no longer available to buy.

Not sure what replaces it? Talk to us.

Contact HME

or call us on +442380455129

Kicker Marine Audio

Kicker Audio KXM Marine 800W 8 Channel Full-Range Amplifier

KA44KXMA8008
The KICKER KXM 800-watt eight-channel amplifier is one of the most flexible marine power plants available, giving you eight independent channels to build a multi-zone system. Each channel produces 50 watts RMS at 4 ohms or 100 watts at 2 ohms, and channels can be bridged for 200 watts. Class D power, KickEQ+ 18dB bass boost and 24dB crossovers combine with gasket-sealed connections and conformal-coated boards for serious flexibility afloat.

Description

The KXMA800.8 tops KICKER's premium KXM range for channel count, offering one of the most flexible power plants in marine audio. Eight Class D channels let you drive speakers across multiple zones of a boat, and any pair can be bridged for more power. A DSP-controlled preamp, independent 24dB crossovers and KickEQ+ variable bass boost give you deep control over how each zone sounds, so the whole boat can play as one system or in separate areas.

It is built to take the marine environment in its stride. The power, speaker and RCA connections are gasket-sealed, the settings sit behind a sealed cover panel, and the circuit boards are conformal-coated against moisture. ABYC and NMMA compliant power terminals, a black anodized aluminium chassis, a top-mounted teal LED light pipe and 316 stainless mounting hardware complete this eight-channel amplifier.

PRODUCT DETAILS

  • Eight independent Class D channels for flexible multi-zone systems
  • 50 watts RMS x 8 at 4 ohms, 100 watts RMS x 8 at 2 ohms
  • 200 watts RMS x 4 into four sets of bridged channels
  • KickEQ+ 18dB variable bass boost with independent 24dB crossovers
  • Gasket-sealed power, speaker and input connections with sealed control cover
  • Conformal-coated circuit boards and ABYC/NMMA compliant power terminals
  • Black anodized aluminium chassis with 316 stainless steel mounting hardware
  • KXMA800.8 eight-channel power amplifier
  • Stainless steel mounting hardware
  • User manual

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Power

RMS Power @ 4 ohm stereo50 W x 8
RMS Power @ 2 ohm stereo100 W x 8
RMS Power @ 4 ohm bridged mono200 W x 4
CEA-2006B Power50 W x 8 @ 4 ohms, 14.4VDC, 1% THD

General

Channels8
Amplifier ClassD
THDLess than or equal to 1% THD+N
Frequency Response10 Hz - 20 kHz
Signal-to-Noise Ratio95 dB
Input Sensitivity250 mV - 10 V
CrossoverAmps 1-2: HP/LP variable 10-5,000 Hz with X10; Amps 3-4: HP/LP/BP, HP 10-500 Hz, LP 40-5,000 Hz, 24dB/octave
KickEQ+ Bass Boost0 - 18 dB @ 40 Hz
Dimensions (L x H x W)14-3/4 x 2-1/8 x 8-5/16 in (37.4 x 5.5 x 21 cm)

No videos available for this product.

No downloads available for this product.

Why choose an eight-channel amplifier?
Eight channels give you the flexibility to power speakers across several zones of a boat, such as cockpit, cabin and tower, from a single amplifier, with independent crossover control for each pair.
How much power does each channel deliver?
Each of the eight channels produces 50 watts RMS at 4 ohms and 100 watts at 2 ohms. Bridging a pair gives 200 watts RMS, for up to four bridged outputs.
Is it built for marine conditions?
Yes. The power, speaker and input connections are gasket-sealed, the controls sit behind a sealed cover, and the boards are conformal-coated. It uses ABYC/NMMA compliant power terminals and 316 stainless hardware.