Raymarine

Raymarine SeaTalk ng to NMEA out for VHF Converter Kit

£130.00
Tax included.
E70196
Genuine Raymarine SeaTalk NG to VHF NMEA 0183 converter kit. Feeds GPS position information from a SeaTalk NG (NMEA 2000) network to an older VHF radio with Digital Selective Calling (DSC) that needs position data in NMEA 0183 format. Supplied complete with converter and cables.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine SeaTalk NG to VHF NMEA 0183 Converter Kit feeds GPS position information from a SeaTalk NG network to an older VHF radio with Digital Selective Calling (DSC). Many first generation DSC radios need vessel position fix data in NMEA 0183 format to support their distress, safety and calling features.

This kit reads NMEA 2000 GPS / GNSS information from the SeaTalk NG network and outputs NMEA 0183 sentences to support older DSC VHF radios. NMEA 0183 connections to the converter are made using the supplied SeaTalk NG to NMEA 0183 bare wires spur cable, a terminal block and the NMEA 0183 cable supplied with the VHF radio.

The kit is supplied with the converter, a 2 m power cable, a 1 m SeaTalk NG spur cable, a 1 m NMEA 0183 VHF stripped-end adapter cable, two backbone terminators and two blanking plugs. The converter is rated IPx6 for installation below decks.

PRODUCT DETAILS

  • Feeds SeaTalk NG / NMEA 2000 GPS position to an older DSC VHF radio
  • Outputs NMEA 0183 sentences for first generation DSC radios
  • Supports VHF distress, safety and calling features that need a position fix
  • Complete kit with converter, power, spur and NMEA 0183 adapter cables
  • IPx6 waterproof rating; 9 to 16 V DC operation
  • 1 x NMEA 0183 to SeaTalk NG converter1 x Power cable 2 m (6.6 ft), provides 12 V DC power to the SeaTalk NG backbone (A06049)1 x Spur cable 1 m (3.3 ft) to connect a device to the SeaTalk NG backbone (A06039)1 x NMEA 0183 VHF stripped-end (2 wire) to SeaTalk NG adapter cable 1 m (3.3 ft) (A06071)2 x Backbone terminators (A06031)2 x Spur blanking plugs (A06032)

No compatible transducers listed for this product.

No spares or accessories listed for this product.

Physical

ConnectionsSeaTalk NG backbone x 2, SeaTalk NG spur x 2, NMEA 0183 spur x 1
DimensionsHeight 30.2 mm (1.19 in), Width 109.45 mm (4.3 in), Depth 21.45 mm (0.84 in)

Power

LEN (NMEA 2000 Load Equivalency Number)1
Peak operating current50 mA
Peak supply current950 mA
Operating voltage range9 V DC to 16 V DC
Nominal supply voltage12 V DC

Environmental

Relative humidityUp to 95%
Waterproof ratingIPx6
Storage temperature-20 C to +65 C (-4 F to 149 F)
Operating temperature-10 C to +50 C (14 F to 122 F)

Conformance

StandardsEMC Directive 2014/30/EU; Australia and New Zealand C-Tick, Compliance Level 2

No videos available for this product.

What does the E70196 converter kit do?
It feeds GPS position information from a SeaTalk NG (NMEA 2000) network to an older VHF radio with Digital Selective Calling. The kit reads NMEA 2000 GPS data and outputs NMEA 0183 sentences that first generation DSC radios need for their distress, safety and calling features.
How is the VHF radio connected?
NMEA 0183 connections to the converter are made using the supplied SeaTalk NG to NMEA 0183 bare wires spur cable, a terminal block, and the NMEA 0183 cable supplied with your VHF radio.
What is supplied in the kit?
The kit includes the converter, a 2 m power cable, a 1 m SeaTalk NG spur cable, a 1 m NMEA 0183 VHF stripped-end adapter cable, two backbone terminators and two blanking plugs.
Will it work with any DSC VHF radio?
It is intended for VHF radios that accept vessel position data over NMEA 0183. Check that your radio has an NMEA 0183 position input before fitting.