This product has been discontinued by Garmin and is no longer available to buy.
Garmin
Garmin GHP Compact Reactor Hydraulic Autopilot System with 1L Pump and No Controller
Description
The Garmin GHP Compact Reactor Hydraulic Autopilot System provides GPS-stabilised self-steering for boats with hydraulic steering. It combines a course computer unit with an internal heading sensor, an electronic control unit and a compact 1 litre electro-hydraulic pump, holding heading and following routes with smooth, reliable control.
This package does not include a dedicated helm control, so the autopilot is configured and operated through a compatible Garmin chartplotter on the same NMEA 2000 network. Setup is guided by the on-screen Dockside and Sea Trial wizards, and installation should be carried out by a qualified marine engineer.
PRODUCT DETAILS
- Complete GPS-stabilised hydraulic autopilot system
- Compact 1 litre electro-hydraulic pump included
- Course computer with internal heading and rate-of-turn sensor
- Controlled through a compatible Garmin chartplotter
- Holds heading and follows routes accurately
- Dockside and Sea Trial wizard setup
- NMEA 2000 connectivity
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Autopilot
| Autopilot type | GPS-stabilised marine autopilot (Reactor CCU course computer) |
| Drive type | Hydraulic (compact 1 L electro-hydraulic pump, included) |
| Helm control | No dedicated instrument supplied; control via a compatible Garmin chartplotter on the same NMEA 2000 network |
Sensor
| Heading sensor (CCU) | Internal solid-state attitude and rate-of-turn sensor; primary heading source |
| CCU dimensions (L x W x H) | 170 x 90 x 50 mm (6.7 x 3.5 x 2 in.) |
| CCU weight | 200 g (7 oz.) |
| CCU water rating | IEC 60529 IPX7 |
Drive
| Pump type | Compact electro-hydraulic pump (included) |
| Pump dimensions (H x W x D) | 84.6 x 100.3 x 155.3 mm (3.3 x 4.0 x 6.1 in.) |
| Pump weight | 2.2 kg (5 lb.) |
| Pump hydraulic ports | Three 1/4 in. NPT ports |
| Pump peak current | Peak 34 A; engaged 5 to 10 A; standby under 1 A (from ECU) |
| ECU dimensions (W x H x D) | 168 x 117 x 51 mm (6.6 x 4.6 x 2 in.) |
| ECU weight | 680 g (24 oz.) |
Connectivity
| Network | NMEA 2000 |
| NMEA 2000 LEN | 4 (200 mA) |
Electrical
| ECU/pump supply voltage | 12 to 24 Vdc (ECU input 11.5 to 30 Vdc) |
| ECU fuse | 40 A, blade-type |
General
| Compatible steering | Hydraulic steering systems |
| Configuration | Dockside Wizard and Sea Trial Wizard via a compatible Garmin chartplotter |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
