Discontinued
This product has been discontinued by Garmin and is no longer available to buy.
Garmin
Garmin Intelliducer Depth Transducer Thru-Hull NMEA0183 13-24 degree deadrise 160 kHz
010-00702-01
The Garmin Thru-Hull Intelliducer is a depth and temperature sensor with NMEA 0183 output. This model is matched to hull deadrise angles of 13 to 24 degrees for accurate readings. Operating at 160 kHz with a depth capability of 900 ft (275 m), it feeds depth and temperature data to up to three NMEA 0183-compliant devices. It is designed for metal- and fibreglass-hull boats.
Description
The Garmin Thru-Hull Intelliducer determines water depth and temperature and sends the data to your NMEA 0183 devices. This version is matched to hull deadrise angles of 13 to 24 degrees, which is important because choosing the correct angle for your hull is what delivers accurate depth readings. Operating at 160 kHz with 150 W RMS of power, it reaches depths of up to 900 ft (275 m) depending on water salinity, bottom type and other conditions. One Intelliducer can supply depth and temperature to as many as three NMEA 0183-compliant devices. It is designed for metal- and fibreglass-hull boats and should not be installed in a wood hull. The sensor runs from a wide 9 to 33 Vdc supply, draws a maximum of 2 W and is supplied with a 9 m (29 ft 6 in) power and data cable. For salt-water installations the submerged surface must be coated with water-based antifouling paint.
PRODUCT DETAILS
- Thru-hull depth and temperature sensor with NMEA 0183 output
- Designed for hull deadrise angles of 13 to 24 degrees for accurate depth readings
- Operates at 160 kHz with a depth capability of 900 ft (275 m)
- Feeds depth and temperature to up to three NMEA 0183-compliant devices
- Built for metal- and fibreglass-hull boats
- Wide 9 to 33 Vdc power input with low 2 W power draw
- Supplied with a 9 m (29 ft 6 in) power and data cable
- Thru-hull Intelliducer with depth and temperature sensor
- Thru-hull fitting with nut
- Gasket and locking ring
- NMEA 0183 power/data cable
- Installation instructions
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Sonar/Sensor
| Sensor Type | Thru-hull depth and temperature Intelliducer (NMEA 0183 output) |
| Frequency | 160 kHz |
| Sonar Power | 150 W (RMS), 1,200 W (peak-to-peak) |
| Depth | 900 ft (275 m), dependent on water salinity, bottom type and other water conditions |
Mounting
| Deadrise Angle | 13 to 24 degrees |
| Hull Compatibility | Designed for metal- and fibreglass-hull boats; not for wood-hull boats |
Connectivity
| Output | NMEA 0183; up to three NMEA 0183-compliant devices can receive data from one Intelliducer |
Electrical
| Power Input | NMEA 0183: 9 to 33 Vdc |
| Power Usage | 2 W maximum |
| Fuse | 2 A (NMEA 0183) |
Physical
| Unit Dimensions (L x W x D) | 116.3 x 101.4 x 76.2 mm (4 19/32 x 4 x 3 in) |
| Weight | 364 g (13 oz) |
| Cable Length | NMEA 0183 power/data cable 9 m (29 ft 6 in) |
| Operating Temperature Range | -15 to 33 C (5 to 91 F) |
| Case Material | PC/PBT and ASA plastic |
No videos available for this product.
Which deadrise angle is this Intelliducer for?
This model is designed for hull deadrise angles of 13 to 24 degrees. If the deadrise angle of your boat does not fall within this range, you will not obtain accurate depth readings, so it is important to select the correct model for your hull.
What does the Intelliducer measure?
The Intelliducer determines water depth and temperature and sends the data to your NMEA 0183 devices. It operates at 160 kHz with a depth capability of 900 ft (275 m).
How many devices can the Intelliducer feed?
You can connect up to three NMEA 0183-compliant devices to receive data from one Intelliducer.
What hulls is the Intelliducer suitable for?
The Intelliducer is designed for metal- and fibreglass-hull boats. It should not be installed in a wood-hull boat.
