Kicker Audio KXM Marine 1200W Monoblock Subwoofer Amplifier Kicker Audio KXM Marine 1200W Monoblock Subwoofer Amplifier
Kicker Audio KXM Marine 1200W Monoblock Subwoofer Amplifier
Discontinued

This product has been discontinued by Kicker Marine Audio and is no longer available to buy.

Not sure what replaces it? Talk to us.

Contact HME

or call us on +442380455129

Kicker Marine Audio

Kicker Audio KXM Marine 1200W Monoblock Subwoofer Amplifier

KA44KXMA12001
The KICKER KXM 1200-watt mono subwoofer amplifier packs huge Class D power into a compact, weatherproof chassis for serious marine bass. It is one-ohm stable and delivers up to 1200 watts into a single channel, with a KXARC wireless remote included so you can adjust gain and bass boost from the helm. Power, speaker and input connections are gasket-sealed and the circuit boards are conformal-coated for lasting protection afloat.

Description

The KXMA1200.1 is the flagship mono amplifier in KICKER's premium KXM marine range, built to drive a demanding subwoofer system aboard a boat. Class D technology delivers enormous output from a small footprint, and one-ohm stability lets you wire multiple subwoofers with confidence. A SHOCwave bass restoration processor, variable 24dB low-pass crossover and adjustable subsonic filter give you precise control over the low end.

Marine durability is engineered in throughout. The power, speaker and RCA connections are gasket-sealed, the settings hide behind a sealed cover panel, and the circuit boards are conformal-coated to resist moisture. ABYC and NMMA compliant power terminals, a black anodized aluminium chassis and 316 stainless mounting hardware round out the package, while the supplied KXARC wireless remote keeps bass control at your fingertips.

PRODUCT DETAILS

  • Class D power plant, one-ohm stable for flexible subwoofer wiring
  • 600 watts RMS x 1 at 4 ohms, 1200 watts RMS x 1 at 2 ohms
  • KXARC wireless remote and SHOCwave bass restoration processor included
  • Variable 24dB low-pass crossover plus variable subsonic filter
  • Gasket-sealed power, speaker and input connections with sealed control cover
  • Conformal-coated circuit boards and ABYC/NMMA compliant power terminals
  • Black anodized aluminium chassis with 316 stainless steel mounting hardware
  • KXMA1200.1 mono power amplifier
  • KXARC wireless remote control
  • Stainless steel mounting hardware
  • User manual

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Power

RMS Power @ 4 ohm mono600 W x 1
RMS Power @ 2 ohm mono1200 W x 1
1 ohm monoStable (+/- 10%)
CEA-2006B Power600 W x 1 @ 4 ohms, 14.4VDC, 1% THD

General

Channels1 (monoblock)
Amplifier ClassD
Frequency Response10 Hz - 160 Hz (+/- 1dB)
Signal-to-Noise Ratio95 dB
Input Sensitivity250 mV - 10 V
Low-Pass CrossoverVariable 40 Hz - 160 Hz, 24dB/octave
Subsonic FilterVariable 10 Hz - 80 Hz, 24dB/octave
KickEQ+ Bass Boost0 - 18 dB, remote adjustable
Dimensions (L x H x W)9-9/16 x 2-1/8 x 8-5/16 in (24.4 x 5.5 x 21 cm)

No videos available for this product.

No downloads available for this product.

How much power does the KXMA1200.1 produce?
It delivers 600 watts RMS into one channel at 4 ohms and 1200 watts RMS into one channel at 2 ohms. It is one-ohm stable, so you can wire multiple subwoofers down to a 1 ohm load.
Is a bass remote included?
Yes. A KXARC wireless remote is supplied so you can monitor and adjust gain, KickEQ+ bass boost and clipping from the helm without reaching the amplifier.
What makes this amplifier suitable for marine use?
The power, speaker and input connections are gasket-sealed, the settings sit behind a sealed cover panel, and the circuit boards are conformal-coated. It also uses ABYC/NMMA compliant power terminals and 316 stainless mounting hardware.