This product has been discontinued by Kicker Marine Audio and is no longer available to buy.
Kicker Marine Audio
Kicker Audio KXM Marine 800W 5 Channel System Amplifier
Description
The KXMA800.5 from KICKER's premium KXM marine range is built to be a full system solution on its own. Four Class D full-range channels handle your speakers while a separate, more powerful subwoofer channel drives the bass, all controlled by KickEQ+ variable bass boost, independent 24dB crossovers and a DSP-controlled preamp. An illuminated clip indicator built into the gain knob helps you set the most power without distortion, and the supplied KXARC wireless remote keeps bass control at the helm.
It is engineered for the water. The power, speaker and RCA connections are gasket-sealed, the settings sit behind a sealed cover panel, and the circuit boards are conformal-coated against moisture. ABYC and NMMA compliant power terminals, a black anodized aluminium chassis, a top-mounted teal LED light pipe and 316 stainless mounting hardware round out this five-channel package.
PRODUCT DETAILS
- Hybrid five-channel Class D design runs speakers and a subwoofer from one amp
- Full-range channels 50 watts RMS x 4 at 4 ohms, 100 watts x 4 at 2 ohms
- Subwoofer channel 200 watts RMS x 1 at 4 ohms, 400 watts x 1 at 2 ohms
- KXARC wireless remote and SHOCwave bass restoration processor included
- KickEQ+ 18dB variable bass boost with independent 24dB crossovers
- Gasket-sealed connections, conformal-coated boards and ABYC/NMMA power terminals
- Black anodized aluminium chassis with 316 stainless steel mounting hardware
- KXMA800.5 five-channel power amplifier
- KXARC wireless remote control
- Stainless steel mounting hardware
- User manual
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Power
| Full-Range RMS @ 4 ohm stereo | 50 W x 4 |
| Full-Range RMS @ 2 ohm stereo | 100 W x 4 |
| Full-Range RMS @ 4 ohm bridged mono | 200 W x 2 |
| Sub Channel RMS @ 4 ohm mono | 200 W x 1 |
| Sub Channel RMS @ 2 ohm mono | 400 W x 1 |
| CEA-2006B Power | 50 W x 4 @ 4 ohms + 200 W x 1 @ 4 ohms |
General
| Channels | 5 (4 full-range + 1 subwoofer) |
| Amplifier Class | D |
| THD | Less than or equal to 1% THD+N (full-range); 1.5% (sub channel) |
| Frequency Response | Amps 1-2: 10 Hz - 20 kHz; Sub: 10 Hz - 160 Hz |
| Signal-to-Noise Ratio | 95 dB |
| Input Sensitivity | 250 mV - 10 V |
| Crossover | Full-range: HP/LP/BP variable, 24dB/octave; Sub: variable LP 40-160 Hz, 24dB/octave |
| KickEQ+ Bass Boost | 0 - 18 dB, remote adjustable |
| Dimensions (L x H x W) | 12-3/4 x 2-1/8 x 8-5/16 in (32.4 x 5.5 x 21 cm) |
No videos available for this product.
No downloads available for this product.
