Maretron
CLMD16 DC-16 ASSEMBLY
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
For larger loads and more circuits, the Maretron MPower CLMD16 is a 16-channel DC load controller module that brings intelligent digital switching to bigger installations. Four of its sixteen electronic circuit breakers handle up to 25 amps and twelve handle up to 12 amps, giving a total current capacity of 125 amps, and select breakers can be paralleled for even larger loads.
The CLMD16 uniquely supports two 12 amp H-bridge reversing polarity circuits for loads such as engine hatches, passerelles and trim tabs. Eight inputs accept hard-wired switches or data such as bilge alarms and hatch positions, and there are two resistive inputs plus one current loop input for uses including tank level monitoring. Twelve of the breakers are dimmable, each can be locked or given a defined power-up state, and every channel reports its current so overcurrent faults and undercurrent conditions can be detected.
Opto-isolated from the NMEA 2000 network, rated to IP67 and ignition protected, the CLMD16 handles lights, pumps, motors and electronics and is controlled from third-party MFDs, the Maretron MBB300C black box, TSM Series touchscreens, MPower keypads or N2KView V3 software.
PRODUCT DETAILS
- 16-channel DC load controller for NMEA 2000 digital switching
- Total current capacity 125 amps (12x12A, 4x25A)
- Two 12A H-bridge reversing circuits for hatches, trim tabs and more
- Eight switch inputs plus resistive and current loop inputs
- Per-channel current monitoring and paralleling of select breakers
- Opto-isolated from NMEA 2000, IP67 rated and ignition protected
- Capacitive touch switches for local control of all loads
No exploded diagram available for this product.
No compatible transducers listed for this product.
No compatible products found.
Specifications
| Number of Channels | 16 |
| Maximum Unit Current Capacity | 125 amps |
| Maximum Channel Current Ratings | 12x12A, 4x25A |
| Switching Voltage | <32 VDC |
| Reversing Circuits | 2 x 12A H-bridge |
| Switch Inputs | 8 hard-wired inputs |
| Analogue Inputs | 2 resistive, 1 current loop |
| 12A ECB Peak Current Capacity | 120 A |
| 25A ECB Peak Current Capacity | 250 A |
| Channel Current Measurement Accuracy | +/-0.5 amps typical |
Electrical
| Voltage Input Range | 8 to 32 VDC |
| Power Consumption | 50mA |
| Load Equivalence Number (LEN) | 1 |
| Reverse Battery Protection | Yes (5 minutes) |
| Load Dump Protection | Yes |
Mechanical
| Size | 279.4mm x 190.0mm x 47.5mm (11.0" x 7.48" x 1.871") |
| Weight | 1.2 kg (2.5 lb) |
| Output Connectors | Deutsch DTP06-4S (J1), DT06-12SA (J2) |
| I/O Connector | Deutsch DRC26-24SA (J3) |
Environmental
| Degree of Protection | IP67 |
| Ignition Protected | Yes |
Certifications
| Standards | NMEA 2000 Certified, CE Mark (RCD 2014/35/EU) |
No videos available for this product.
No downloads available for this product.
