Garmin
Garmin Airmar CM599LH CHIRP Dual Range 2-3kW Pocket Mount Transducer Barewire
£0.00
/
Tax included.
Shipping calculated at checkout.
010-11813-30
The Garmin CM599LH is the pocket-mount version of the high-power 599LH: a 2-3 kW dual-band CHIRP transducer (28-60 and 130-210 kHz) that fits flush in a hull or keel pocket and sounds to 10,000 ft. It pairs with the Garmin GSD 26 sonar module.
✓
Collection or delivery in 1-2 weeks
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Garmin CM599LH is the pocket-mount version of the high-power 599LH CHIRP transducer, a popular choice for boat builders. It fits flush within a custom pocket cut into the hull or keel, giving all the benefits of a thru-hull without the need for a High-Performance Fairing and with less drag. The 25-element broadband array sweeps a 28 to 60 kHz low band and a 130 to 210 kHz high band, for 112 kHz of total bandwidth from one transducer.
With 2 to 3 kW of dual-range transmit power the low band sounds to 10,000 ft, while the high band returns fine detail to 1,500 ft. Because the pocket sets the mounting angle, the CM599LH can accommodate any hull deadrise and suits fibreglass or metal hulls with any propulsion type. An integral depth and fast-response temperature sensor is built in. The transducer terminates in bare wires and requires the Garmin GSD 26 CHIRP sonar module, which connects to networked GPSMAP chartplotters.
PRODUCT DETAILS
- High-power pocket/keel-mount CHIRP transducer, dual 28-60 kHz (low) and 130-210 kHz (high) bands
- 2 to 3 kW of dual-range transmit power with 112 kHz of total bandwidth from a 25-element ceramic array
- Fits flush in a custom pocket in the hull or keel, with no High-Performance Fairing and less drag than a thru-hull
- Accommodates any deadrise angle, set by the pocket construction
- Sounds to 10,000 ft on the low band, with the high band returning fine detail to 1,500 ft
- Integral depth and fast-response water-temperature sensor
- Requires the Garmin GSD 26 CHIRP sonar module and connects to networked GPSMAP chartplotters
- CM599LH pocket-mount transducer with 49 ft (15 m) bare-wire cable
- Mounting hardware
- Installation instructions
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
Sonar
| Sonar type | Broadband CHIRP, dual-band Low and High (Spread Spectrum with CHIRP technology) |
| Frequency – Low band | 28 to 60 kHz |
| Frequency – High band | 130 to 210 kHz |
| Total bandwidth | 112 kHz from one transducer |
| Transmit power | 2 to 3 kW (dual-range high power) |
| Maximum depth | 10,000 ft (3,048 m). Low band to 3,048 m (10,000 ft); high band to 457 m (1,500 ft) |
Beam
| Beamwidth – Low band | 23 to 9 degrees port-starboard, 11 to 5 degrees fore-aft |
| Beamwidth – High band | 8 to 4 degrees |
Mounting
| Mount type | Pocket / keel mount – fitted flush within a custom pocket cut into the hull or keel; no High-Performance Fairing required |
| Supported deadrise | Accommodates any deadrise angle, set by the pocket construction (Garmin: installation dependent) |
| Hull / engine suitability | Fibreglass and metal hulls (stepped, planing or displacement); all propulsion types |
Physical
| Housing material | Urethane / resin pocket-mount housing |
| Element configuration | 25 internal broadband ceramic assemblies |
| Dimensions | Approximately 368 mm (14.50 in) overall length, 348 mm (13.71 in) mounting length, 210 mm (8.25 in) width; four 3/8-16 UNC mounting studs |
| Weight | 14.2 kg (31.2 lb) |
| Temperature sensor | Yes – depth and fast-response water-temperature sensor |
Connectivity
| Connector | Bare wires (terminates to the Garmin GSD 26 sonar module) |
| Cable length | 49 ft (15 m) |
Compatibility
| Sonar module required | Requires the Garmin GSD 26 CHIRP sonar module. Listed under "Spread Spectrum with CHIRP Technology Transducers for use with the Garmin GSD 26"; the pocket-mount equivalent of the 599LH. Connects to networked GPSMAP chartplotters via the Garmin Marine Network. |
General
| In the box | CM599LH pocket-mount transducer with 49 ft (15 m) bare-wire cable, mounting hardware and installation instructions |
No videos available for this product.
What is a pocket-mount transducer?
A pocket-mount transducer fits flush within a custom pocket cut into the hull or keel. It gives the performance of a thru-hull without a High-Performance Fairing and with less drag, and is a popular choice for boat builders.
How does the CM599LH differ from the 599LH?
They share the same 25-element CHIRP array, 28-60 and 130-210 kHz bands, 2-3 kW power and 10,000 ft rating. The CM599LH is the pocket/keel-mount version, while the 599LH is an in-hull tank mount. The pocket-mount CM599LH reads depth and temperature.
Does the CM599LH need a sonar module?
Yes. It is a 2-3 kW bare-wire CHIRP transducer that requires the Garmin GSD 26 CHIRP sonar module, which connects to networked GPSMAP chartplotters.
What deadrise does the CM599LH suit?
It accommodates any deadrise angle, because the angle is set by how the pocket is built into the hull or keel.
Does the CM599LH read water temperature?
Yes. It includes an integral depth reading and a fast-response water-temperature sensor.
