Garmin B175H CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin Garmin B175H CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin
Garmin B175H CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin

Garmin

Garmin B175H CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin

£0.00
Tax included. Shipping calculated at checkout.
010-11937-20
The Garmin B175H is a bronze thru-hull CHIRP transducer that delivers 1 kW high-frequency CHIRP with built-in depth and temperature sensing. This no-tilt (0°) version suits hull deadrise angles of 0-7°, with a flush-mounted housing that needs no fairing block. It provides sharp, high-resolution returns and excellent bottom detail.
✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Garmin B175H is a bronze thru-hull transducer that brings 1 kW high-frequency CHIRP performance to a compatible Garmin sonar system. The flush-mounted housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers or bunks without damage, while the tilted element inside aims the sound beam vertically and removes the need for a fairing block. Built-in depth and water-temperature sensing comes as standard.

This no-tilt (0°) model is matched to hull deadrise angles of 0-7° and gives sharp, high-resolution returns and excellent bottom detail. An excellent choice for fibreglass and wood hulls, it connects to CHIRP-capable Garmin chartplotters, combos and sonar modules. The transducer is supplied with installation instructions, which should be followed carefully to avoid damaging your boat.

PRODUCT DETAILS

  • High CHIRP bronze thru-hull transducer operating at 130-210 kHz
  • 1 kW (RMS) transmit power for sharp, high-resolution returns and excellent bottom detail
  • Beamwidth of 6° to 10° (-3 dB)
  • Maximum depth of 1200 ft (366 m)
  • 0 degree tilted element matched to 0-7° hull deadrise; no fairing block required
  • Built-in water-temperature sensor
  • 8-pin Garmin connector with a 39 ft (11.9 m) cable
  • Compatible with CHIRP-capable Garmin systems including the GSD 26 module
  • Garmin B175H bronze thru-hull transducer (0 degree tilt)
  • Anti-rotation hardware / mounting bolts
  • Installation instructions

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

Garmin GSD 26 CHIRP Professional Sonar Module for Transducers up to 3kW

Garmin GSD 26 CHIRP Professional Sonar Module for Transducers up to 3kW

Sonar

Sonar TypeHigh CHIRP
Operating Frequency130-210 kHz
CHIRP Bandwidth130-210 kHz (High band)
Transmit Power1 kW (RMS)
Maximum Depth1200 ft (366 m)

Beam

Beamwidth (-3 dB)6° to 10° (-3 dB)

Mounting

Mounting StyleBronze thru-hull, flush-mounted
Element Tilt0 degree tilted element
Supported Deadrise0-7°

Physical

Housing MaterialBronze
Built-in Temperature SensorYes

Connectivity

Connector8-pin Garmin
Cable Length39 ft (11.9 m)
Data ProvidedDepth and temperature

Compatibility

Compatible SystemsCompatible with Garmin GSD 26 CHIRP professional sonar module; also compatible with GPSMAP 7600xsv series (with GSD 25), GPSMAP 5x7/7x1/8x0/10x0 xs series, ECHOMAP CHIRP DV/SV series and STRIKER DV/SV series (adapter cable may be required). Requires a CHIRP-capable Garmin chartplotter, combo or sonar module.

General

SeriesB175 Series
BrandGarmin (Airmar)

No videos available for this product.

What sonar frequency does the Garmin B175H use?
The B175H operates at 130-210 kHz (high chirp) with a transmit power of 1 kW (RMS).
How deep can the Garmin B175H read?
The B175H has a maximum depth of 1200 ft (366 m) under good conditions; actual depth depends on water conditions, bottom type and the sonar module used.
Which hull deadrise does this 0 degree-tilt B175H suit?
This version has a 0 degree tilted element matched to hull deadrise angles of 0-7°, so the beam fires vertically without a fairing block.
What connector does the Garmin B175H have?
The B175H uses an 8-pin Garmin connector on a 39 ft (11.9 m) cable. Adapter cables are available to suit other Garmin sounder connector types.
Does the Garmin B175H need a CHIRP sonar?
Yes. The transducer is designed for CHIRP-capable Garmin systems such as the GSD 26 professional module and GPSMAP xs/xsv combos; an adapter cable may be required for some models.
Does the Garmin B175H measure water temperature?
Yes, the B175H has a built-in water-temperature sensor in addition to depth.