Garmin

Garmin B22 12deg, Bronze, Thru-Hull depth, temp Transducer

£0.00
Tax included. Shipping calculated at checkout.
010-10217-00
Bronze tilted thru-hull transducer with a 12 degree element for hulls of 8 to 15 degree deadrise. Single-frequency 200 kHz operation provides depth and water temperature with a focused 14 degree beam. Suits fibreglass and wood hulls, not metal.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Garmin B22 is a bronze thru-hull transducer with a 12 degree tilted element, so the 200 kHz beam fires vertically on hulls with a deadrise of 8 to 15 degrees. It delivers depth and water-temperature readings and performs well at higher boat speeds, with a focused 14 degree beam that holds clean bottom returns where wider transducers can lose lock.

The bronze housing suits fibreglass and wooden hulls and must not be fitted to aluminium or stainless-steel boats, as galvanic interaction between the metal hull and bronze housing can cause corrosion. The transducer uses a 6-pin Garmin connection rated at 375 W and reads to 900 ft. Supplied with installation hardware and instructions; follow them carefully to avoid damaging the hull.

PRODUCT DETAILS

  • Bronze thru-hull housing with 12 degree tilted element
  • Single-frequency 200 kHz operation for depth and water temperature
  • 375 W power with a focused 14 degree beam to 900 ft
  • Matched to hull deadrise angles of 8 to 15 degrees
  • For fibreglass and wooden hulls; not suitable for metal boats
  • 6-pin Garmin connector

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

Airmar ModelB22
Mounting TypeThru-hull, tilted element (12 degree tilt)
Housing MaterialBronze
FunctionsDepth and Temperature

Sonar

Operating Frequency200 kHz
Power (RMS)375 W
Beamwidth14 degrees
Maximum Depth900 ft

Physical

Supported Deadrise8 to 15 degrees
Connector6-pin
Recommended HullsFibreglass and wood hulls (not for metal)

Compatibility

Compatible SoundersWorks with Garmin fishfinder and chartplotter/sounder units that accept a depth and temperature transducer with the matching connector; an adapter cable may be required for some models.

No videos available for this product.

No downloads available for this product.

No frequently asked questions for this product.