Garmin
Garmin PM265LH CHIRP Dual Range 1kW Pocket Mount Transducer Barewire
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Garmin PM265LH is the pocket-mount version of the B265LH, a 1 kW bronze CHIRP transducer favoured by boat builders for clean factory installations. Its dual-range design sweeps a low band of 42 to 65 kHz and a high band of 130 to 210 kHz, combining deep-water reach with the crisp target separation that narrow high-frequency beams provide.
This bare-wire model reads to a maximum depth of 3,000 ft and reports depth and temperature. The pocket-mount housing is recessed into the hull, so the installation is dependent on the vessel. The 39 ft bare-wire cable connects to the Garmin GSD 26 CHIRP sonar module.
The kit includes installation instructions; follow them carefully to avoid damaging your boat.
PRODUCT DETAILS
- 1 kW dual-range CHIRP (42 to 65 kHz low, 130 to 210 kHz high)
- Pocket-mount bronze housing, a popular choice for boat builders
- Deep-water depth readings to 3,000 ft with depth and temperature
- Bare-wire termination for the Garmin GSD 26 CHIRP module
- Pocket-mount version of the B265LH
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
General
| Model | Airmar PM265LH |
| Mounting type | Pocket mount |
| Functions | Depth, temperature |
| Sonar technology | CHIRP, dual-range (Low + High band) |
| Housing material | Bronze |
Sonar
| Operating frequency | 42 to 65 kHz (Low) and 130 to 210 kHz (High) |
| Power | 1 kW |
| Beamwidth (LF/HF, -3 dB) | 16 to 25 degrees (Low) / 6 to 10 degrees (High) |
| Maximum depth | 3,000 ft |
Physical
| Connector | Bare wires |
| Cable length | 39 ft |
| Installation | Installation dependent (pocket mount; bronze housing recessed into the hull) |
Compatibility
| Compatible sounders | Pocket-mount version of the B265LH. Bare-wire CHIRP transducer for the Garmin GSD 26 (and GSD 28) CHIRP sonar module; a popular choice for boat builders. A 12-pin adapter (010-11613-10) is available for 12-pin sounder connectors. |
No videos available for this product.
No frequently asked questions for this product.

