Garmin B175L CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin Garmin B175L CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin
Garmin B175L CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin

Garmin

Garmin B175L CHIRP 0 Degree Tilt Depth and Temperature Transducer 8 pin

£1,870.00
Tax included. Shipping calculated at checkout.
010-11938-20
The Garmin B175L is a bronze thru-hull CHIRP transducer that delivers 1 kW low-frequency CHIRP with built-in depth and temperature sensing. This no-tilt (0°) version suits hull deadrise angles of 0-7°, with a flush-mounted housing that needs no fairing block. It provides maximum depth penetration for offshore and deep-water fishing.
✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Garmin B175L is a bronze thru-hull transducer that brings 1 kW low-frequency CHIRP performance to a compatible Garmin sonar system. The flush-mounted housing protrudes less than a quarter of an inch outside the hull and can sit on trailer rollers or bunks without damage, while the tilted element inside aims the sound beam vertically and removes the need for a fairing block. Built-in depth and water-temperature sensing comes as standard.

This no-tilt (0°) model is matched to hull deadrise angles of 0-7° and gives maximum depth penetration for offshore and deep-water fishing. An excellent choice for fibreglass and wood hulls, it connects to CHIRP-capable Garmin chartplotters, combos and sonar modules. The transducer is supplied with installation instructions, which should be followed carefully to avoid damaging your boat.

PRODUCT DETAILS

  • Low CHIRP bronze thru-hull transducer operating at 40-60 kHz
  • 1 kW (RMS) transmit power for maximum depth penetration for offshore and deep-water fishing
  • Beamwidth of 16° to 25° (-3 dB)
  • Maximum depth of 2000 ft (610 m)
  • 0 degree tilted element matched to 0-7° hull deadrise; no fairing block required
  • Built-in water-temperature sensor
  • 8-pin Garmin connector with a 39 ft (11.9 m) cable
  • Compatible with CHIRP-capable Garmin systems including the GSD 26 module
  • Garmin B175L bronze thru-hull transducer (0 degree tilt)
  • Anti-rotation hardware / mounting bolts
  • Installation instructions

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

Garmin GSD 26 CHIRP Professional Sonar Module for Transducers up to 3kW

Garmin GSD 26 CHIRP Professional Sonar Module for Transducers up to 3kW

Sonar

Sonar TypeLow CHIRP
Operating Frequency40-60 kHz
CHIRP Bandwidth40-60 kHz (Low band)
Transmit Power1 kW (RMS)
Maximum Depth2000 ft (610 m)

Beam

Beamwidth (-3 dB)16° to 25° (-3 dB)

Mounting

Mounting StyleBronze thru-hull, flush-mounted
Element Tilt0 degree tilted element
Supported Deadrise0-7°

Physical

Housing MaterialBronze
Built-in Temperature SensorYes

Connectivity

Connector8-pin Garmin
Cable Length39 ft (11.9 m)
Data ProvidedDepth and temperature

Compatibility

Compatible SystemsCompatible with Garmin GSD 26 CHIRP professional sonar module; also compatible with GPSMAP 7600xsv series (with GSD 25), GPSMAP 5x7/7x1/8x0/10x0 xs series, ECHOMAP CHIRP DV/SV series and STRIKER DV/SV series (adapter cable may be required). Requires a CHIRP-capable Garmin chartplotter, combo or sonar module.

General

SeriesB175 Series
BrandGarmin (Airmar)

No videos available for this product.

What sonar frequency does the Garmin B175L use?
The B175L operates at 40-60 kHz (low chirp) with a transmit power of 1 kW (RMS).
How deep can the Garmin B175L read?
The B175L has a maximum depth of 2000 ft (610 m) under good conditions; actual depth depends on water conditions, bottom type and the sonar module used.
Which hull deadrise does this 0 degree-tilt B175L suit?
This version has a 0 degree tilted element matched to hull deadrise angles of 0-7°, so the beam fires vertically without a fairing block.
What connector does the Garmin B175L have?
The B175L uses an 8-pin Garmin connector on a 39 ft (11.9 m) cable. Adapter cables are available to suit other Garmin sounder connector types.
Does the Garmin B175L need a CHIRP sonar?
Yes. The transducer is designed for CHIRP-capable Garmin systems such as the GSD 26 professional module and GPSMAP xs/xsv combos; an adapter cable may be required for some models.
Does the Garmin B175L measure water temperature?
Yes, the B175L has a built-in water-temperature sensor in addition to depth.