Garmin

Garmin TM265LM CHIRP Transom Mount Depth and Temperature Transducer Barewire

£1,799.99
Tax included. Shipping calculated at checkout.
010-11650-20
A 1 kW plastic transom-mount CHIRP transducer with dual low and medium bands of 42 to 65 kHz and 85 to 135 kHz. It reads to 3,000 ft, reports depth and temperature, and terminates in bare wires on a 39 ft cable.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Garmin TM265LM is a 1 kW plastic transom-mount CHIRP transducer that pairs a low band of 42 to 65 kHz with a medium band of 85 to 135 kHz. The low frequency reaches deep water while the medium band widens coverage and lifts target separation through the mid-range, making it a strong all-round offshore performer.

This bare-wire model reads to a maximum depth of 3,000 ft and mounts on transoms with a deadrise of 3 to 21 degrees on a 39 ft cable. It connects to the Garmin GSD 26 CHIRP sonar module via its terminal block and also reports water temperature.

The kit includes installation instructions; follow them carefully to avoid damaging your boat.

PRODUCT DETAILS

  • 1 kW dual-range CHIRP (42 to 65 kHz low, 85 to 135 kHz medium)
  • Deep-water depth readings to 3,000 ft
  • Wide mid-band coverage with depth and temperature
  • Bare-wire termination for the Garmin GSD 26 CHIRP module
  • Transom mount for deadrise angles of 3 to 21 degrees

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

General

ModelAirmar TM265LM
Mounting typeTransom mount
FunctionsDepth, temperature
Sonar technologyCHIRP, dual-range (Low + Medium band)
Housing materialPlastic

Sonar

Operating frequency42 to 65 kHz (Low) and 85 to 135 kHz (Medium)
Power1 kW
Beamwidth (LF/MF, -3 dB)16 to 25 degrees (Low) / 11 to 16 degrees (Medium)
Maximum depth3,000 ft

Physical

ConnectorBare wires
Cable length39 ft
Supported transom angle3 to 21 degrees

Compatibility

Compatible soundersBare-wire CHIRP transducer for the Garmin GSD 26 (and GSD 28) CHIRP sonar module. Connect the bare wires to the module terminal block; a 12-pin adapter (010-11613-10) is available for 12-pin sounder connectors.

No videos available for this product.

No frequently asked questions for this product.