Victron
Victron MultiPlus Compact 24/2000/50 120V
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus Compact 24/2000/50 120V combines a powerful pure sine wave inverter, an adaptive battery charger and a high-speed AC transfer switch in one compact 24 V enclosure, configured for 120 VAC / 60 Hz networks. When shore or generator power fails it takes over the load in milliseconds, so sensitive electronics keep operating without interruption.
Built for larger marine, mobile and off-grid 24 V systems on 120 V supplies, it delivers 2000 VA of clean 120 V output and recharges the battery bank with a 50 A four-stage adaptive charger, plus a 4 A trickle charge for a starter battery. PowerControl and PowerAssist let it share a limited shore or generator supply, supplementing it from the battery whenever peak demand calls for it.
This is the 120 V version of Victron's discontinued MultiPlus Compact 24/2000/50 and remains a strong choice for higher-power 24 V back-up and standalone installations on 120 V networks.
PRODUCT DETAILS
- Pure sine wave inverter, charger and transfer switch in one compact unit
- Configured for 120 VAC / 60 Hz output
- 2000 VA continuous output at 25°C with 4000 W peak power
- 50 A four-stage adaptive charger plus 4 A starter-battery charge
- 50 A high-speed transfer switch with PowerControl and PowerAssist
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 24 V |
| Continuous output power | 2000 VA |
| Continuous output power at 25°C | 1600 W |
| Peak power | 4000 W |
| Maximum charge current | 50 A |
| Transfer switch | 50 A |
Inverter
| DC input voltage range | 19 - 33 V |
| Output voltage / frequency | 120 VAC, 60 Hz |
| Cont. output power at 40°C (W) | 1400 W |
| Cont. output power at 65°C (W) | 1000 W |
| Peak power | 4000 W |
| Maximum efficiency | 94% |
| Zero load power | 11 W |
Charger
| Charge voltage 'absorption' | 28.8 V |
| Charge voltage 'float' | 27.6 V |
| Storage mode | 26.4 V |
| Charge current house battery | 50 A |
| Charge current starter battery | 4 A |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes (parallel and three phase operation, remote monitoring and system integration) |
| Programmable relay | Yes |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high, AC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C (fan assisted cooling) |
| Humidity (non-condensing) | Max 95% |
| Maximum altitude | 2000 m |
Physical
| Material & colour | Aluminium, blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | M8 bolts |
| Weight | 12 kg |
| Dimensions (h x w x d) | 520 x 255 x 125 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
