Victron
Victron MultiPlus 12/3000/120
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Victron MultiPlus 12/3000/120 is a combined 3000 VA pure sine wave inverter, 120 A adaptive battery charger and high-speed AC transfer switch in one enclosure, designed for marine, mobile and off-grid systems that demand plenty of mains-quality power and rapid recharging from a single 12 V unit.
On loss of shore or generator power the main output switches to the inverter in under 20 milliseconds, keeping sensitive electronics running without a glitch. Victron PowerControl limits how much current is taken from a small shore or generator supply, and PowerAssist tops that supply up from the battery during short, heavy loads before recharging the bank afterwards. A programmable auxiliary output lets non-essential loads drop away when no AC source is available.
Adaptive charging with a battery temperature sensor maintains the house bank, with a trickle output for a starter battery. The unit is parallel and three-phase capable, and integrates with VictronConnect, a Multi Control panel or a GX device for monitoring and configuration.
PRODUCT DETAILS
- 3000 VA pure sine wave inverter with a 120 A adaptive battery charger
- High-speed AC transfer switch changes over in under 20 milliseconds
- PowerControl and PowerAssist manage limited shore or generator power
- Programmable auxiliary output and programmable relay
- Parallel and three-phase capable, with VE.Bus monitoring and control
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Key specifications
| System voltage | 12 V |
| Continuous output power | 3000 VA |
| Continuous output power at 25°C | 2400 W |
| Peak power | 6000 W |
| Maximum charge current | 120 A |
| Transfer switch | 16 A or 50 A |
AC inputs
| AC input voltage range | 187-265 VAC |
| AC input frequency | 45-65 Hz |
Inverter
| DC input voltage range | 9.5-17 V |
| Output voltage / frequency | 230 VAC, 50 Hz |
| Cont. output power at 40°C (W) | 2200 W |
| Cont. output power at 65°C (W) | 1700 W |
| Peak power | 6000 W |
| Maximum efficiency | 93 % |
| Maximum continuous output current | 11 A |
Charger
| Charge voltage 'absorption' | 14.4 V |
| Charge voltage 'float' | 13.8 V |
| Storage mode | 13.2 V |
| Charge current house battery | 120 A |
| Charge current starter battery | 4 A |
| Battery temperature sensor | Yes |
Connectivity & control
| VE.Bus communication port | Yes |
| General purpose comms port | Yes |
| Programmable relay | Yes |
| Auxiliary output | 16 A |
| Remote on/off | Yes |
Protection
| Protection | Output short circuit, overload, battery voltage too high or too low, temperature too high, AC on inverter output, input voltage ripple too high |
Environmental
| Operating temperature range | -40 to +65°C |
| Humidity (non-condensing) | Max 95% |
| Maximum altitude | 2000 m |
Physical
| Material & colour | Aluminium, blue RAL 5012 |
| Protection category | IP20 |
| Battery connection | M8 bolts |
| 230 VAC connection | Screw terminals 13 mm² (6 AWG) |
| Weight | 18 kg |
| Dimensions (h x w x d) | 364 x 295 x 221 mm |
Conformance
| Safety | EN-IEC 60335-1, EN-IEC 60335-2-29, IEC 62109-1 |
| Emission / Immunity | EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6-3 |
No videos available for this product.
No downloads available for this product.
No frequently asked questions for this product.
