Oceanic Systems
NMEA2000 exhaust gas temperature sensor
£382.80
/
Tax included.
Shipping calculated at checkout.
4510
An NMEA 2000 wet exhaust gas temperature sensor with a Type T thermocouple probe reading -20 to 300 C.
✓
Available for collection or delivery in ~2 days
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
The Oceanic Systems 4510 NMEA 2000 Exhaust Gas Temperature Sensor, with its 4511 probe, measures the wet exhaust gas temperature of a marine engine or generator and reports it directly onto the NMEA 2000 network. It uses a highly accurate Type T thermocouple that reads from -20 to 300 degrees C, so partial cooling water blockages can be seen and acted on before any damage occurs.
The probe fits easily into the exhaust hose using a corrosion resistant duplex stainless steel pocket that is sealed against leaks, with a stainless steel sheathed 3 metre screened cable back to the sensor module. A blue LED confirms NMEA 2000 transmission, and readings can be shown on master consoles or on separate alarm panels as part of a complete Oceanic Systems vessel monitoring system.
PRODUCT DETAILS
- Type T thermocouple probe, -20 to 300 C
- Reports exhaust gas temperature over NMEA 2000
- Detect partial cooling water blockages early
- Duplex stainless steel sealed probe pocket
- Stainless steel sheathed 3 metre screened cable
- Blue LED confirms NMEA 2000 transmission
- Operating voltage 9 to 32 V DC
- Manufactured to the NMEA 2000 standard
No exploded diagram available for this product.
No compatible transducers listed for this product.
No compatible products found.
Key specifications
| Sensing element | Type T thermocouple |
| Temperature range | -20 to 300 C |
| Cable | Stainless steel sheathed 3 metre screened thermocouple cable |
Electrical
| Operating voltage | 9 to 32 V DC |
| Power consumption | 45 mA average |
| Load Equivalence Number | 1 |
| Reverse battery protection | Yes |
Physical
| Module size | 105 x 43 mm |
| Weight | 100 g |
| Probe housing | Corrosion resistant duplex stainless steel |
Environmental
| Degree of protection | IP30 |
Connection
| Network | NMEA 2000 (PGN 130316 / 130312) |
No videos available for this product.
What does the exhaust gas temperature sensor detect?
It measures wet exhaust gas temperature so a rise caused by a partial cooling water blockage can be seen before the engine or exhaust is damaged.
How is the probe fitted?
The 4511 probe mounts in the exhaust hose using a sealed duplex stainless steel pocket, with a stainless steel sheathed 3 metre screened cable to the sensor module.
Which displays can show the reading?
Any suitably equipped NMEA 2000 display, master console or Oceanic Systems alarm panel can show the temperature reported by the sensor.
