Scanstrut
Scanstrut Flip Pro Max - Dual USB-C Charge Socket
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
Flip Pro Max is the most powerful USB charger in the Scanstrut range, built for 12V or 24V systems and featuring two 60W USB-C ports for maximum charging performance. With full USB-C on both ports, it is ideal for fast-charging modern laptops, large tablets and phones together from a single socket.
Constructed from premium marine-grade materials with a compact footprint, Flip Pro Max is IPX4 waterproof with the cover closed and completely washdown-ready. The spring-loaded cap stays tightly closed to protect the ports from the elements, then locks open to shield your cables while charging.
PRODUCT DETAILS
- Scanstrut's most powerful USB charger - two 60W USB-C ports
- Fast charge (60W max) up to 2 devices at a time - 36W on 12V, 60W on 24V
- Universal fit for any USB-C connector, ideal for modern laptops and large tablets
- Spring-loaded waterproof cap locks open to protect cables when in use
- IPX4 waterproof when the lid is closed
- Marine-grade materials, UV resistant with a 316 stainless hinge and spring
- Supplied as standard with an optional front-fit bezel
- Easy install using a 32mm (1.25") hole saw
- Flip Pro Max dual USB-C charge socket
- Front-fit bezel (supplied as standard)
- Gasket
- Fixing screws
- Installation instructions and cutting template
No exploded diagram available for this product.
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
General
| Range | Flip Pro Max |
| Lid | Spring-loaded waterproof cap, locks open when in use |
| Materials | Marine-grade, UV resistant, 316 stainless hinge and spring |
Connectivity
| Port Configuration | 2 x USB-C (60W each) |
| USB-C Output | 5V/9V/12V at 3A (12V system); up to 20V at 3A (24V system) |
| Total Output | 36W max on 12V system, 60W max on 24V system |
Electrical
| Input Voltage | 10-30V DC (12/24V system) |
| Input Current (max) | 6A (10A fuse recommended) |
| Standby Draw | 0.01W |
| Connection | 6.3 x 0.8mm spade connectors |
Dimensions
| Bezel | 55.0mm (2.17") square |
| Overall Depth | 60.8mm (2.39") |
| Cut-out / Hole Saw | 32mm (1.26") / Ø32mm (1.25") hole saw |
| Min Panel Thickness | 3mm (0.11") |
| Max Panel Thickness | 25mm (1") |
Environment
| Waterproof Rating | IPX4 front only, lid closed |
Approvals
| Certifications | CE, FCC, UKCA, C-Tick, RoHS, WEEE |
No videos available for this product.
