Raymarine

Raymarine Evolution EV-100 Power Autopilot Pack (No Control Head)

£1,595.00
Tax included.
T70250
Evolution EV-100 power autopilot pack without a control head: EV-1 Sensor Core, ACU-100, cabling kit and Type 0.5 hydraulic pump. Steer from a compatible Axiom chartplotter or add a p70Rs head separately.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The T70250 supplies the Evolution EV-100 Power Pilot without the pilot head: EV-1 Sensor Core, ACU-100 actuator control unit, Evolution cabling kit and the Type 0.5 hydraulic pump for 50 to 110 cc steering cylinders on 12 volt systems. It suits helms where a compatible Raymarine Axiom chartplotter provides pilot control, or installations reusing an existing p70 series head.

Hydro-Balance technology keeps hydraulic course keeping crisp, while the 9-axis EV-1 sensor adapts to conditions without any calibration routine. Add the p70Rs rotary control head (E70329) at any time for dedicated dial-steer control.

PRODUCT DETAILS

  • EV-1 Sensor Core, ACU-100, cabling kit and Type 0.5 pump, no control head
  • For hydraulic steering cylinders of 50 to 110 cc (3.1 to 6.7 cu in), 12 V systems
  • Control the pilot from a compatible Axiom chartplotter
  • Hydro-Balance technology prevents steering oscillation
  • Add a p70Rs control head (E70329) at any time
  • EV-1 Sensor Core (E70096)
  • ACU-100 actuator control unit (E70098)
  • Type 0.5 hydraulic pump (E12139)
  • Evolution cabling kit (R70160)

No compatible transducers listed for this product.

No spares or accessories listed for this product.

System

Autopilot typeEvolution EV-100 Power Autopilot
Suitable steering systemHydraulic steering, 50 to 110 cc (3.1 to 6.7 cu in) ram capacity, 12 V systems
Control headNot included (sold separately, or control from a compatible Raymarine MFD)
Heading sensorEV-1 Sensor Core (E70096)
Actuator control unitACU-100 actuator control unit (E70098)
Drive unitType 0.5 hydraulic pump (E12139)
CablingEvolution cabling kit (R70160)
Controller alternativesCompatible Raymarine Axiom family chartplotter (LightHouse 4 v4.4.70 or later for Axiom 2 Pro / Axiom 2 XL)
Which Evolution pack suits my boat?
Match the pack to your steering system: EV-100 Wheel or Tiller for cockpit-drive sailboats, EV-100, EV-150 or EV-200 Power for hydraulic steering depending on cylinder capacity, EV-200 Sail for below-decks mechanical steering, EV-300 for solenoid-controlled systems, EV-400 for Type 2 and Type 3 drives on larger vessels, and EV-DBW for drive-by-wire steering.
Does an Evolution autopilot need calibration?
No. Set-up is automatic: the rudder gain, rudder damping, counter rudder and compass calibration routines required by earlier autopilots are no longer necessary, and the system keeps refining itself as you use the boat. This is documented in the EV-1 installation instructions (87472).
Do I need a rudder angle reference sensor?
Raymarine highly recommends the rudder angle reference transducer (M81105) on every Evolution system for optimum performance, and it is essential on ACU-300 solenoid installations. The EV-400 Sail and Power packs include a rotary rudder feedback unit, and the ACU-300 ships with one.
How do I check the displacement ratings?
Use the vessel's fully laden displacement, which Raymarine notes is often around 20 percent above the designed displacement, when comparing your boat against a drive or pack rating.
Can I control the autopilot from my chartplotter?
Yes. Compatible controllers include the Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL and Axiom 2 XL chartplotter families as well as the p70s and p70Rs pilot heads. Axiom 2 Pro and Axiom 2 XL need LightHouse 4 v4.4.70 or later; earlier families are supported per the compatibility tables in document 87472.