Raymarine

Raymarine Evolution EV-200 Power Autopilot Pack with Type 1 Hydraulic Pump

£2,795.00
Tax included.
T70157
Complete Evolution autopilot for outboard and inboard powerboats with hydraulic steering. The EV-200 Power system pack combines the EV-1 Sensor Core, ACU-200, p70Rs rotary head, cabling kit and a Type 1 12 volt hydraulic pump for 80 to 230 cc steering cylinders.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine Evolution EV-200 Power Pilot with Type 1 pump (T70157) is a complete hydraulic autopilot for medium powerboats. The included Type 1 12 volt hydraulic pump suits outboard and inboard steering cylinder capacities between 80 and 230 cc (4.9 to 14.0 cu in), driven by the ACU-200 actuator control unit at up to 15 A continuous. Raymarine's Hydro-Balance technology adjusts for elasticity in the hydraulic circuit, delivering precise course keeping with no drive hunting.

The pack contains the EV-1 Sensor Core, ACU-200, p70Rs rotary control head, Evolution SeaTalkng cabling kit and the Type 1 pump (pump installation guide document 81178). The 9-axis sensor commissions without calibration, and pilot control is also available from a compatible Axiom, Axiom 2 Pro or Axiom 2 XL chartplotter. Existing Type 1 drive owners can choose the driveless T70156 instead.

PRODUCT DETAILS

  • Complete power pilot pack: EV-1, ACU-200, p70Rs, cabling kit and Type 1 pump
  • For hydraulic steering cylinders of 80 to 230 cc (4.9 to 14.0 cu in)
  • Type 1 12 V pump driven at up to 15 A continuous by the ACU-200
  • Hydro-Balance technology prevents steering oscillation and drive hunting
  • 9-axis EV-1 Sensor Core, no commissioning calibration
  • Pilot control also available from compatible Axiom chartplotters
  • EV-1 Sensor Core (E70096)
  • ACU-200 actuator control unit (E70099)
  • p70Rs control head (E70329)
  • Type 1 hydraulic pump (12 V) (M81120)
  • Evolution cabling kit (R70160)

No compatible transducers listed for this product.

No spares or accessories listed for this product.

System

Autopilot typeEvolution EV-200 Power Autopilot
Suitable steering systemHydraulic steering, 80 to 230 cc (4.9 to 14.0 cu in) ram capacity
Control headp70Rs control head (E70329)
Heading sensorEV-1 Sensor Core (E70096)
Actuator control unitACU-200 actuator control unit (E70099)
Drive unitType 1 hydraulic pump (12 V) (M81120)
CablingEvolution cabling kit (R70160)
Controller alternativesCompatible Raymarine Axiom family chartplotter (LightHouse 4 v4.4.70 or later for Axiom 2 Pro / Axiom 2 XL)
Which Evolution pack suits my boat?
Match the pack to your steering system: EV-100 Wheel or Tiller for cockpit-drive sailboats, EV-100, EV-150 or EV-200 Power for hydraulic steering depending on cylinder capacity, EV-200 Sail for below-decks mechanical steering, EV-300 for solenoid-controlled systems, EV-400 for Type 2 and Type 3 drives on larger vessels, and EV-DBW for drive-by-wire steering.
Does an Evolution autopilot need calibration?
No. Set-up is automatic: the rudder gain, rudder damping, counter rudder and compass calibration routines required by earlier autopilots are no longer necessary, and the system keeps refining itself as you use the boat. This is documented in the EV-1 installation instructions (87472).
Do I need a rudder angle reference sensor?
Raymarine highly recommends the rudder angle reference transducer (M81105) on every Evolution system for optimum performance, and it is essential on ACU-300 solenoid installations. The EV-400 Sail and Power packs include a rotary rudder feedback unit, and the ACU-300 ships with one.
How do I check the displacement ratings?
Use the vessel's fully laden displacement, which Raymarine notes is often around 20 percent above the designed displacement, when comparing your boat against a drive or pack rating.
Can I control the autopilot from my chartplotter?
Yes. Compatible controllers include the Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL and Axiom 2 XL chartplotter families as well as the p70s and p70Rs pilot heads. Axiom 2 Pro and Axiom 2 XL need LightHouse 4 v4.4.70 or later; earlier families are supported per the compatibility tables in document 87472.