Raymarine i70s and i60 System Pack Raymarine i70s and i60 System Pack
Raymarine i70s and i60 System Pack

Raymarine

Raymarine i70s and i60 System Pack

£1,795.00
Tax included. Shipping calculated at checkout.
T70331
This pack combines the Raymarine i70s colour multifunction instrument with the i60 Wind analogue display. The i70s brings digital depth, speed and graphical data views while the i60 keeps wind on a traditional needle gauge. Both network over a single SeaTalkng backbone.
✓ Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

HME Care Plus

Raymarine cover is 2 years (3 with 90-day registration). Add 1 or 2 more years with HME Care Plus.

Extended cover is added to your order and confirmed with your warranty documentation.

Description

This Raymarine pack pairs the i70s colour multifunction instrument with the i60 Wind analogue display, a popular combination for sailors who want digital flexibility and a traditional wind needle side by side. The i70s carries depth, speed, tridata, engine and navigation pages on its 4.1 inch optically bonded screen, while the i60 keeps apparent and true wind angle on its 000 to 180 degree gauge.

Both displays share the same 110 x 115 mm footprint for a matched helm fit and connect to a common SeaTalkng backbone, where autopilots, transducers and chartplotters join the same network. The i70s also calibrates analogue transducers connected through an iTC-5 converter.

Raymarine's trade listing does not itemise the cabling supplied with this pack, so confirm contents with Hudson Marine when planning the installation.

PRODUCT DETAILS

  • i70s multifunction and i60 Wind analogue displays together
  • Digital data pages plus a traditional wind needle
  • Matched 110 x 115 mm cases for the helm
  • SeaTalkng networking with autopilots and chartplotters
  • iTC-5 calibration support from the i70s

No exploded diagram available for this product.

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

Display

Screen4.1 inch TFT LCD, optically bonded
Resolution320 (H) x 240 (V)
Colours16 bit colour (64k colours)
Brightness1,200 cd/m2
Character heightUp to 43 mm (1.7 in)

Physical

Width110 mm (4.33 in)
Height115 mm (4.53 in)

Mounting

Panel cut-out92 mm (3 5/8 in) hole cutter

Power

Nominal supply voltage12 V dc
Operating voltage range9 V dc to 16 V dc (protected up to 32 V dc)
Current143 mA
Power consumption1.7 W
LEN (NMEA 2000 Load Equivalency Number)3

Connections

Data connections1x SeaTalkng connector

Environmental

Waterproof ratingIPx6 and IPx7
Relative humidity93% max
Operating temperature-25°C to +55°C (-13°F to +131°F)
Storage temperature-30°C to +70°C (-22°F to +158°F)

Conformance

ConformanceEurope 2004/108/EC; Australia and New Zealand C-Tick compliance level 2; NMEA 2000 certification pending at publication
Can I use my existing analogue transducers with the i70s?
Yes. The iTC-5 instrument transducer converter brings analogue depth, speed, temperature, wind and rudder transducers onto the SeaTalkng network, and the i70s provides full calibration of the transducers connected through it.
Which smart transducers connect directly to the backbone?
DST800 and DT800 smart transducers connect straight to the SeaTalkng backbone without an iTC-5 or pod, and the current DST810 Gen2 lists the i70s among its compatible displays.
Can the i70s show AIS targets?
Yes. The AIS repeater view displays the closest 25 AIS equipped vessels from an NMEA 2000 AIS receiver, and individual targets can be selected for vessel information.
How do I update the i70s software?
The i70s software updates through a connected, compatible Raymarine multifunction display. The latest packages and the update procedure are published at raymarine.com/software.
What size is the panel cut out for the i70s?
The i70s mounts through a 92 mm (3 5/8 in) hole, and mounting template 87260 is included in the Downloads tab.