Raymarine

Raymarine P79 600w 50-200 kHz Adjustable In-Hull Angle Transducer

£200.00
Tax included.
E66008
600W adjustable in-hull dual-frequency (50/200 kHz) depth transducer for fibreglass hulls. No hull penetration, deadrise 2-22 degrees, 9.1 m cable, 8-pin DSM connector.
✓ Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine P79 is an adjustable in-hull depth transducer ideal for trailered boats or anyone who wants to minimise drag. It mounts inside the boat and reads through the solid fibreglass bottom with no hull protrusion. An innovative flange bonds to the inside of the hull with quick-setting marine epoxy, is aligned to the boat's deadrise using built-in markings, then filled with non-toxic antifreeze before the active transducer cap is dialled in for a straight-down beam and maximum echo returns.

This 600-Watt version operates at 50 and 200 kHz and is supplied with a 9.1 m (30 ft) cable fitted with a Raymarine 8-pin DSM-style connector, directly compatible with the CP370 sonar module and legacy CP300, DSM300 and DSM30 modules. It accommodates deadrise angles from 2 to 22 degrees and suits solid fibreglass hulls up to 5/8 inch thick. It is not for use with cored hulls and, as an in-hull design, does not include a water-temperature sensor.

PRODUCT DETAILS

  • In-hull depth transducer reads through a solid fibreglass hull with no external protrusion
  • Dual-frequency 50/200 kHz operation, 600 W power
  • 9.1 m (30 ft) cable with Raymarine 8-pin DSM-style connector (CP370, CP300, DSM300, DSM30)
  • Adjustable flange accommodates hull deadrise angles from 2 to 22 degrees
  • Epoxy installation with no cutting or drilling required
  • Not for use with cored hulls; no water-temperature sensor

No compatible transducers listed for this product.

No spares or accessories listed for this product.

No compatible products found.

General

MeasurementsDepth only (in-hull, no temperature sensor)
MountingIn-hull, bonded inside the hull with marine epoxy; no hull penetration
Deadrise range2 to 22 degrees (adjustable flange)
Hull suitabilitySolid fibreglass up to 5/8 inch (16 mm); not for cored hulls

Sonar

Operating frequency50 / 200 kHz
Power output600 W

Interface

Cable9.1 m (30 ft) cable with Raymarine 8-pin DSM-style connector

No videos available for this product.

No downloads available for this product.

Does the P79 require a hole in the hull?
No. The P79 is an in-hull transducer that bonds to the inside of a solid fibreglass hull and reads through it, so there is no hull penetration and no external drag.
What deadrise angles does it support?
The adjustable flange accommodates a wide range of deadrise angles from 2 to 22 degrees, and is dialled in during installation for a straight-down beam.
What hulls is it suitable for?
Solid fibreglass hulls up to 5/8 inch (16 mm) thick, or aluminium hulls under 3.8 mm. It is not recommended for cored hulls. As an in-hull design it has no water-temperature sensor.