Raymarine

Raymarine Cyclone Pro Radar Pedestal 110 Watts

£6,295.00
Tax included.
E70621
Cyclone Pro open-array radar pedestal with 110 W peak power, equivalent to a 12 kW magnetron and a maximum range of 96 Nm. Solid-state Doppler radar with CHIRP pulse compression, RangeFusion and a 100-knot wind rating. Pedestal only; antenna, cables and VCM100 sold separately.

Collection or delivery in 1-2 weeks

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

The Raymarine Cyclone Pro Pedestal is the 110-watt solid-state core of the flagship Cyclone open-array radar system, with a peak power output equivalent to a 12 kW magnetron and an extended maximum range of 96 nautical miles. Its powerful solid-state transmitter drives superior target separation and long-range resolution through CHIRP pulse compression and Raymarine beam-sharpening, while Doppler target tracking and exclusive RangeFusion technology sharpen situational awareness in busy waters.

Engineered for extremes, the Cyclone Pro pedestal is rated to 100 knots of wind and IPX6 water ingress, and its low 335 mm profile with a built-in cable gland suits demanding sportfishing and offshore installations. Combine it with a 3 ft, 4 ft or 6 ft Cyclone antenna and a VCM100 voltage converter, then network to a LightHouse multifunction display. This listing is the pedestal only.

PRODUCT DETAILS

  • 110 W solid-state transmitter, equivalent to a 12 kW magnetron radar
  • Maximum range scale of 96 Nm with CHIRP pulse compression
  • RangeFusion technology blends short and long pulses into one high-clarity image
  • Doppler target tracking colour-codes inbound (red) and outbound (green) targets
  • Antenna rotation up to 60 RPM for high-speed imaging
  • Best-in-class 100-knot wind rating and IPX6 waterproof rating
  • Low 335 mm profile with a concealed cable gland for clean installation
  • Connects to LightHouse multifunction displays via a single RayNet connection
  • Radar pedestal
  • M10 stud x4
  • M10 nut x8
  • M10 spring washer x4
  • M10 plain washer x4
  • Cable gasket
  • Mounting template
  • Note: power and data cables are supplied only with Cyclone topfill system packs

No compatible transducers listed for this product.

Performance

Radar typeSolid State open array radar (Doppler)
Peak power output110 W
Equivalent magnetron power12 kW magnetron equivalent
Maximum range scale96 Nm
Transmitter frequency9370, 9400, 9430 MHz (User Selectable)
Antenna rotation speed12 / 24 / 36 / 48 / 60 RPM
Receiver characteristicLinear
Receiver noiseLess than 5 dB

Power

Supply voltage (using VCM100)Nominal 12 V dc or 24 V dc (Min 10.2 V dc, Max 31.2 V dc)
Power consumption (typical)95 W
Power consumption (maximum)195 W
Power consumption (standby)28 W
Boot up time40 seconds
Standby to transmitLess than 5 seconds

Physical

Pedestal dimensions388 mm x 360 mm x 335 mm (to top of antenna)
Pedestal weight16 Kg

Connections

Power connection1x Power connector
Data connection1x RayNet connector

Environmental

Waterproof ratingIPX6
Operating temperature range-25C to +55C (-13F to 131F)
HumidityUp to 93% at 40C (104F)
Maximum wind speed100 Kts

Approvals

USA47CFR Part 80 Certificate of Approval; FCC ID: PJ5-953MPSSR
CanadaRSS138 Iss. 1; IC: 4069B-953MPSSR
European Union & EFTARadio Equipment Directive 2014/53/EU Self-Declaration
Australia / New ZealandACMA Declaration of Conformity, Compliance level 3
What is the difference between Cyclone and Cyclone Pro?
Cyclone uses a 55-watt solid-state transmitter (equivalent to a 6 kW magnetron) with a maximum range of 72 nautical miles, while Cyclone Pro uses a 110-watt transmitter (equivalent to a 12 kW magnetron) with an extended maximum range of 96 nautical miles. Both share the same pedestal, antennas, Doppler and RangeFusion features.
Which multifunction displays is the Cyclone radar compatible with?
The Cyclone open-array radar is compatible with Raymarine LightHouse 3 multifunction displays, including Axiom, Axiom+, Axiom Pro and Axiom XL, running at least LightHouse software version 3.15. It is also supported on Axiom 2 Pro and Axiom 2 XL displays.
Does the Cyclone radar require a VCM100 voltage converter?
Yes. The Cyclone and Cyclone Pro radars are powered through the VCM100 Voltage Converter Module (E70648), which supplies the radar from a nominal 12 V dc or 24 V dc system. Topfill radar packs include the correct VCM100; older VCM100 versions (E52091) are not suitable.
What data does the Doppler target tracking need?
Doppler features require COG (Course Over Ground) and SOG (Speed Over Ground) data from a GPS or GNSS source on the system. A heading source (e.g. an Evolution autopilot sensor) is recommended and improves Doppler performance at speeds below 15 knots, but is not essential.
Can I run two radars on the same system?
Yes. A networked Raymarine system supports a maximum of two radar scanners at any one time, for example a Cyclone open array together with a Quantum radome, or two Cyclone open arrays, subject to the positioning guidance in the installation instructions.