Raymarine

Raymarine Quantum 2 Q24D Wireless CHIRP Radar with 10m Power and Data Cables

£2,445.00
Tax included.
T70416
This kit pairs the Raymarine Quantum 2 Q24D Doppler radar with a 10 m power cable and a 10 m RayNet data cable, ready to wire to a compatible Raymarine multifunction display. Doppler processing colour-codes inbound targets red and outbound green, and the radar tracks up to 25 targets out to 24 nautical miles. Can also connect over built-in Wi-Fi.

Available for collection or delivery in ~2 days

Pickup available at Mercury Yacht Harbour

Usually ready in 2-4 days

Description

This Raymarine Quantum 2 kit brings together the 18-inch Doppler-enhanced solid-state radome and the cabling needed for a wired installation: a 10 m power cable and a 10 m RayNet to RayNet data cable. Quantum 2 adds true Doppler processing to Raymarine's compact CHIRP radar, measuring the frequency shift of returning echoes to instantly colour-code contacts red for inbound and green for outbound, so collision risks stand out at a glance.

The supplied 10 m cables suit installations where the radar mounts a moderate distance from the display. Quantum 2 tracks up to 25 targets simultaneously with a True Motion filter, draws just 17 W on transmit and weighs only 5.6 kg. The Q24D carries both a RayNet connector and built-in Wi-Fi, so it can be wired with the included data cable or linked wirelessly to a compatible Raymarine multifunction display.

PRODUCT DETAILS

  • Quantum 2 Q24D Doppler radar supplied with 10 m power and data cables
  • Doppler collision-avoidance colour-codes inbound red and outbound green
  • Tracks up to 25 simultaneous radar targets with True Motion filtering
  • Connects by the included RayNet data cable or built-in Wi-Fi
  • Clear detection from 24 nautical miles to close range at just 17 W transmit
  • 18-inch solid-state CHIRP radome weighing only 5.6 kg
  • Quantum 2 Q24D Doppler radome scanner
  • Power cable, 10 m (32.8 ft)
  • RayNet to RayNet data cable, 10 m
  • Documentation pack
  • Mounting fixings: 4x M8 bolts, 4x spring washers, 4x flat washers

No compatible transducers listed for this product.

Physical

Diameter541.0 mm (21.3 in)
Height209.5 mm (8.25 in)
Weight5.6 kg (12.3 lbs)

Power

Supply voltage12 V dc or 24 V dc nominal (min 10.8 V dc, max 31.2 V dc)
Power consumption (transmit)17 W maximum
Power consumption (standby)7 W
Power consumption (sleep, Wi-Fi only)2 W
Inline fuse rating5 A
Thermal breaker rating3 A

Environmental

Waterproof ratingIPx6
Operating temperature range-10 °C (14 °F) to +55 °C (131 °F)
Storage temperature range-25 °C (-13 °F) to +70 °C (+158 °F)
HumidityUp to 95% at 35 °C (95 °F)
Maximum wind speed100 kts

Performance

Maximum range24 nautical miles
Range scales1/16, 1/8, 1/4, 3/8, 1/2, 3/4, 1, 1.5, 2, 3, 4, 6, 8, 12, 16 and 24 nautical miles

Transmitter

Transmitter typeX-band solid-state transmitter with pulse compression technology
Transmit frequency9354 MHz to 9446 MHz
Peak power output20 W
Pulse widths (3 dB)40 ns to 14.7 µs
CHIRP lengths400 ns to 22 µs
Pulse repetition frequency920 Hz to 5900 Hz
CHIRP bandwidthUp to 32 MHz

Receiver

IF frequency26 MHz
Noise figure< 4 dB

Antenna

Antenna typePatch Array
Beamwidth (nominal)Horizontal: 4.9°, Vertical: 20°
PolarizationHorizontal
Rotation speed24 RPM nominal

Doppler

Doppler target trackingTracking of 25 simultaneous Radar targets
Doppler target filteringTrue Motion mode identifies only those objects that are moving relative to the vessel

Conformance

ConformanceEN 60945:2002 / IEC 60945:2002-08; Radio Equipment Directive 2014/53/EU; FCC Part 2 & Part 80
What is included in this Quantum 2 kit?
The kit includes the Quantum 2 Q24D Doppler radome, a 10 m power cable, a 10 m RayNet to RayNet data cable, mounting fixings and documentation (87342 Rev 6).
What does the Doppler feature do?
Doppler processing detects whether contacts are inbound or outbound and colour-codes them red or green so collision risks stand out (87342 Rev 6).
Can I connect this Quantum 2 over Wi-Fi?
Yes. The Q24D has both a RayNet connector and built-in Wi-Fi, so you can wire it with the included cable or connect wirelessly (87342 Rev 6).
Which displays work with this Quantum 2 kit?
eS and gS Series and Axiom, Axiom+, Axiom Pro, Axiom 2 Pro, Axiom XL and Axiom 2 XL displays running LightHouse 3 v3.4 or later, or LightHouse 4 (87342 Rev 6).