Raymarine
Raymarine i70s Depth, Speed and Wind Pack with Short Arm Vane
Pickup available at Mercury Yacht Harbour
Usually ready in 2-4 days
Description
This Raymarine system pack builds a complete i70s instrument network from one box: the 4.1 inch i70s colour multifunction display, a short arm masthead wind vane, a DST800 through hull depth, speed and temperature transducer and the iTC-5 converter that brings the analogue masthead signal onto SeaTalkng. A 3 m backbone cable, T-piece, power cable and two terminators complete the network.
The i70s presents wind, speed, depth and tridata pages on its optically bonded 1,200 cd/m2 display, with full calibration of the transducers connected through the iTC-5. Once the backbone is powered, autopilots and Axiom chartplotters join the same network with a single spur each.
The 3 m cable kit suits tiller steered yachts and smaller cruisers; choose the T70226 pack with long arm vane and 9 m kit for larger vessels.
PRODUCT DETAILS
- Complete i70s instrument system in one box
- i70s 4.1 inch colour display, 1,200 cd/m2, IPx6 and IPx7
- Short arm masthead wind vane and DST800 depth, speed and temperature transducer
- iTC-5 converter with full calibration from the i70s
- 3 m SeaTalkng backbone, T-piece, power cable and terminators included
- Expands with autopilots, Axiom chartplotters and more displays
- i70s multifunction instrument display
- Short arm masthead wind vane transducer
- DST800 through hull depth, speed and temperature transducer
- iTC-5 instrument transducer converter
- 3 m SeaTalkng backbone cable
- SeaTalkng T-piece
- SeaTalkng power cable
- 2x SeaTalkng backbone terminators
No compatible transducers listed for this product.
No spares or accessories listed for this product.
No compatible products found.
Display
| Screen | 4.1 inch TFT LCD, optically bonded |
| Resolution | 320 (H) x 240 (V) |
| Colours | 16 bit colour (64k colours) |
| Brightness | 1,200 cd/m2 |
| Character height | Up to 43 mm (1.7 in) |
Physical
| Width | 110 mm (4.33 in) |
| Height | 115 mm (4.53 in) |
Mounting
| Panel cut-out | 92 mm (3 5/8 in) hole cutter |
Power
| Nominal supply voltage | 12 V dc |
| Operating voltage range | 9 V dc to 16 V dc (protected up to 32 V dc) |
| Current | 143 mA |
| Power consumption | 1.7 W |
| LEN (NMEA 2000 Load Equivalency Number) | 3 |
Connections
| Data connections | 1x SeaTalkng connector |
Environmental
| Waterproof rating | IPx6 and IPx7 |
| Relative humidity | 93% max |
| Operating temperature | -25°C to +55°C (-13°F to +131°F) |
| Storage temperature | -30°C to +70°C (-22°F to +158°F) |
Conformance
| Conformance | Europe 2004/108/EC; Australia and New Zealand C-Tick compliance level 2; NMEA 2000 certification pending at publication |
- Installation Instructions (87420 Rev 1, EN)
- Operation Instructions i70 / i70s (81401 Rev 6, EN)
- Mounting Template i70s (87260-1)
- Declaration of Conformity EU (i70s, E70327)
- PSTI Statement of Compliance (i70s, E70327)
- Declaration of Conformity EU (iTC-5, E70010)
- PSTI Statement of Compliance (iTC-5, E70010)